You do not have permission to edit this page, for the following reason:
You can view and copy the source of this page.
x
1
Published in ''Rapid Prototyping Journal'' Vol. 1 (2), pp. 13-23, 1995<br />2
doi: 10.1108/135525495100868353
== Abstract ==4
5
Stereolithography (SLA) is one of the most important techniques used in rapid prototyping processes. It has a great industrial interest because it allows for dramatic time savings with respect to traditional manufacturing processes. One of the main sources of error in the final dimensions of the prototype is the curl distortion effect owing to the shrinkage of the resin during the SLA process. Presents a study of the influence of different constructive and numerical parameters in the curl distortion, an analysis which was made using the computer code stereolithography analysis program, developed to model SLA processes using the finite element method. Also briefly presents this code.6
Return to Bugeda et al 1995a.
Back to Top
Document information
Published on 01/01/1995
DOI: 10.1108/13552549510086835
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?