Abstract

CO2 flue gases acquired from different sources contain a significant amount of impurities and water, which are corrosive to the pipeline steel. To design the pipelines for large scale of CO2 flue gas transport, the corrosion of pipeline steels has to be investigated in the realistic conditions. In this paper, corrosion behaviour of steel S355 and stainless steel 316L in CO2 flue gas solutions has been investigated using electrochemical techniques in an autoclave. The corrosion rates of the steels in different environments were measured by polarization and mass loss measurements. The corrosion morphology and products on the steel surface were analyzed by photo- And electron microscope and x-ray diffraction, respectively. Three types of polymer coatings on the steel S355 have been studied in 3.5% NaCl solution plus CO2 in the autoclave at 100 bar and 60°C. The corrosion resistance of the coatings has been measured by electrochemical impedance measurements. The structures and the adhesion of the coatings before and after the autoclave tests have been investigated using microscope and pull-off test. The results show that the Coating B has better corrosion resistance than the other two types of coatings, which is a good candidate for internal coatings of a pipeline. © 2013 The Author.

Abstract

The development of advanced driver assistance technology continues to proceed rapidly. Cooperative systems based on wireless communication are a specific form of advanced driver assistance that is currently evolving rapidly. A drawback in the development of such systems is that options for large scale field-testing and -development of these automated systems are limited. Traffic simulation however offers widespread options for testing. In this paper the effects of cooperative driving using cooperative adaptive cruise control (CACC) to influence congestion shockwaves are evaluated on a part of the Amsterdam freeway network. The effects of congestion shockwaves on a network scale can be different to uniform freeway sections due to interaction between varying traffic flows. The application of CACC to mitigate the negative effects of shockwaves on a network level are simulated and analysed in this research for varying levels of CACC penetration. The results are analysed on both a quantitative as well as qualitative level and give a deeper understanding into the possibilities of the mass application of CACC systems. © 2011 IEEE.

Abstract

In this paper, the design and results of two cooperative driving applications are presented that both increase traffic flow on highways by reducing shockwave traffic jams and decrease the risk of head-on collisions. The first application is an advisory system based on vehicle-vehicle communication that showed positive results with a penetration level of 100% of equipped vehicles. The second application is both an advisory and automated system based on infrastructure-vehicle communication that showed positive results with a penetration level of 10%-30%.

Abstract

Road throughput can be increased by driving at small inter-vehicle time gaps. The amplification of velocity disturbances in upstream direction, however, poses limitations to the minimum feasible time gap. This effect is covered by the notion of string stability. String-stable behavior is thus considered an essential requirement for the design of automatic distance control systems, which are needed to allow for safe driving at time gaps well below 1 s. Using wireless inter-vehicle communications to provide real-time information of the preceding vehicle, in addition to the information obtained by common Adaptive Cruise Control (ACC) sensors, appears to significantly decrease the feasible time gap, which is shown by practical experiments with a test fleet consisting of six passenger vehicles. The large-scale deployment of this system, known as Cooperative ACC (CACC), however, poses challenges with respect to the reliability of the wireless communication system. A solution for this scalability problem can be found in decreasing the transmission power and/or beaconing rate, or adapting the communications protocol. Although the main CACC objective is to increase road throughput, the first commercial application of CACC is foreseen to be in truck platooning, since short distance following is expected to yield significant fuel savings in this case.