Abstract

Vehicle manufactures have adopted different strategies for improving the environmental performance of their fleet including lightweight design and alternative drivetrains such as EVs. Both strategies reduce energy during use but may result in a relative increase of the impact during other stages. To address this, a lifecycle approach is needed when vehicle design strategies are developed. The thesis explores the extent that such a lifecycle approach is adopted today and assesses the potential of these strategies to reduce the lifecycle impact of vehicles. Moreover it aims to contribute to method development for lifecycle considerations during product development and material selection. Current practices were explored in an empirical study with four vehicle manufacturers. The availability of tools for identifying, monitoring and assessing design strategies was explored in a literature review. The results of the empirical study showed that environmental considerations during product development often lack a lifecycle perspective. Regarding the use of tools a limited number of such tools were utilized systematically by the studied companies despite the numerous tools available in literature. The influence of new design strategies on the lifecycle environmental performance of vehicles was assessed in three case studies; two looking into lightweight design and one at EVs. Both strategies resulted in energy and GHG emissions savings though the impact during manufacturing increases due to the advanced materials used. Assumptions relating to the operating conditions of the vehicle e.g. lifetime distance or for EVs the carbon intensity of the energy mix, influence the level of this tradeoff. Despite its low share in terms of environmental impact EOL is important in the overall performance of vehicles. The thesis contributed to method development by suggesting a systematic approach for material selection. The approach combines material and environmental analysis tools thus increases the possibilities for lifecycle improvements while minimizing risk for sub-optimizations. "p"QC 20160920

Abstract

This paper presents a thermal investigation of lightweight on-board receiver modules of wireless power transfer systems for electric vehicles. The studied modules are capable of receiving up to 11 kW at a resonance frequency of 85 kHz over a distance of 110–160 mm. The receiver modules were built as sandwich and space–frame concept to design stiff and lightweight structures. The high transmission power of automotive wireless power transfer systems combined with the multi-part assembly of receiver modules led to challenges in heat management. To address this, the physical behaviour of the proposed lightweight concepts were studied on component and system level using a hardware-in-the-loop testing facility for wireless power transfer systems. Special emphasis was laid on the validation of a thermal simulation model, which uses analytical calculated power losses taking into account their temperature dependency. The proposed simulation model is consistent with the experimental validation of the critical active components. The performed systematic studies build the basis for a more sophisticated thermal dimensioning of various constructions for wireless power transfer modules. Document type: Article