Abstract

The last decades there is a strong interest in predicting cavitation dynamics as it is a prerequisite in order to predict cavitation erosion. Industrial applications require accurate results in an acceptable time span and as a result there is a focus on large scale dynamics. In this paper the RANS equations are used to investigate the shedding frequency of sheet cavities in two-dimensional simulations. First a verification study is made for the NACA 0015 in 6 degrees angle of incidence. A grid sensitivity study is conducted in wetted flow and in steady (non-shedding) cavitating condition (σ=1.6). Then an investigation is conducted in order to capture the shedding frequency. The results show that only when a correction for turbulent viscosity at the cavity-water interface is used it was possible to capture the shedding frequency as found in other numerical studies. Furthermore, a validation study is conducted on a NACA66-312 α=0.8 for two different angles of attack. The obtained results are compared and validated with the experimental data from Leroux ''et al''. They indicate that the 2D shedding frequency predicted by the numerical simulations is in good agreement with the frequency obtained in the experiment.

Abstract

This work presents a numerical analysis of the ability of the high lift airfoil profile Selig S1223 for working as hydrofoil under water conditions. The geometry of the hydrofoil blade is designed through a suitable airfoil profile and then studied carefully by means of Computational Fluid Dynamics (CFD) in order to check its hydrodynamic behavior, i.e., including lift and drag analysis, and determinations of streamlines velocities and pressures fields. Finally conclusions on the use of this profile in a possible application for hydrokinetic turbine blades are detailed.

Abstract

The main objective of this article is to achieve a very high lift rotor to take the maximum advantage of the kinetic energy of a slow velocity water flow, which belongs to a lowland river type. Low speed flux and lack of depth are the main obstacles in hydrokinetic operation. The use of a high lift aerodynamic profile and the gain of the rotor number of blades serve to accomplish the task. This work presents the fluid dynamic design for an axial hydrokinetic turbine rotor, studied in a three-dimensional (3D) numerical simulation by means of Computational Fluid Dynamics (CFD). The use of CFD techniques avoids some physical model assays. For the hydrokinetic turbine rotor design, first a one-dimensional (1D) theoretical design was carried out, starting with the selection of a suitable airfoil profile to create the hydrofoil blade. Then, the 3D rotor geometry was defined and studied carefully by means of CFD, to check its hydrodynamic behavior, that is, lift and drag, streamline velocities and pressure fields. The CFD results were obtained using an open CFD code (Kratos) This is the peer reviewed version of the following article: [Oller, S. A., Nallim, L. G. and Oller, S. (2016), Fluid dynamic design of an axial rotor for hydrokinetic riverbed turbine-improvement introduced by a high lift foil profile

Abstract