O. Soto, R. Lohner
A design methodology based on the adjoint approach for flow problems governed by the incompressible Euler equations is presented. The main feature of the algorithm is that it avoids solving the adjoint equations, which saves an important amount of CPU time. Furthermore, the methodology is general in the sense it does not depend on the geometry representation. All the grid points on the surface to be optimized can be chosen as design parameters. In addition, the methodology can be applied to any type of mesh. The partial derivatives of the Row equations with respect to the design parameters are computed by finite differences. In this way, this computation is independent of the numerical scheme employed to obtain the Row solution. Once the design parameters have been updated, the new solid surface is obtained with a pseudo-shell approach in such a way that local singularities, which can degrade or inhibit the convergence to the optimal solution, are avoided. Some 2D and 3D numerical examples are shown to demonstrate the proposed methodology.
Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Published on 01/01/2001
DOI: 10.1002/nme.207.absLicence: CC BY-NC-SA license
Views 0Recommendations 0
Are you one of the authors of this document?