V. Solis Cabrera, J. Carvallo, J. Maldonado Mahuad
This study describes the process for the creation of a quality model that evaluates Learning Objects in terms of technology and didactics by using i* notation. In order to achieve the objective, quality models from both aspects were reviewed along with LO concepts and quality characteristics that a LO must accomplish were determined in order to consider the evaluation characteristics. The IQMC method was used to construct the diagram for strategic (SD) i* sections for the final quality model. With the SD model created, it was established the traceability between the generated model criteria and the ISO/IEC 25010 matrix to keep a correlation between the i* notation characteristics and the standard ISO matrix mentioned before. The matrix obtained was enriched with conceptual characteristics and with the attributes that a LO should fulfill. The different metrics in the ISO matrix were established for LO evaluations. As a result, a model through LO evaluation with each one of the selected metrics was generated.
Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Published on 01/01/2018
Volume 9, Issue 2, 2018DOI: 10.29019/enfoqueute.v9n2.234Licence: CC BY-NC-SA license
Views 0Recommendations 0
Are you one of the authors of this document?