(Created page with " == Abstract == In order to support the development process of Advanced Driver Assistance systems for road vehicles, TNO is operating a hardware-in-the-loop test setup. In th...") |
m (Scipediacontent moved page Draft Content 470968553 to Schouten et al 2008a) |
(No difference)
| |
Latest revision as of 20:23, 28 January 2021
Abstract
In order to support the development process of Advanced Driver Assistance systems for road vehicles, TNO is operating a hardware-in-the-loop test setup. In this facility, called VeHIL, vehicles in the direct neighborhood of the test vehicle are simulated using wheeled mobile robots. Due to the required type of maneuvers, these robots have independently driven and steered wheels. Consequently, the robot is overactuated. Furthermore, since the robot is capable of high dynamic maneuvers, slip effects caused by the tires can play an important role. A position controller based on feedback linearization is presented, using the so-called multicycle approach which regards the robot as a set of independent unicycles. As a result, the wheeled mobile robot is position controlled while each unicycle is controlled taking weight transfer as well as longitudinal and lateral tire slip into account. © 2008 IEEE.
Original document
The different versions of the original document can be found in:
Document information
Published on 01/01/2008
Volume 2008, 2008
DOI: 10.1109/ivs.2008.4621292
Licence: CC BY-NC-SA license
Share this document
Keywords
claim authorship
Are you one of the authors of this document?