Abstract

The Yucca Mountain Drift Scale Test (DST) is a multiyear, large-scale underground heating test designed to study coupled thermal–hydrological–mechanical–chemical behavior in unsaturated fractured and welded tuff. As part of the international cooperative code-comparison project DEvelopment of COupled models and their VALidation against EXperiments, four research teams used four different numerical models to simulate and predict coupled thermal–hydrological–mechanical (THM) processes at the DST. The simulated processes included heat transfer, liquid and vapor water movements, rock-mass stress and displacement, and stress-induced changes in fracture permeability. Model predictions were evaluated by comparison to measurements of temperature, water saturation, displacement, and air permeability. The generally good agreement between simulated and measured THM data shows that adopted continuum model approaches are adequate for simulating relevant coupled THM processes at the DST. Moreover, thermal-mechanically induced rock-mass deformations were reasonably well predicted using elastic models, although some individual displacements appeared to be better captured using an elasto-plastic model. It is concluded that fracture closure/opening caused by change in normal stress across fractures is the dominant mechanism for thermal-stress-induced changes in intrinsic fracture permeability at the DST, whereas fracture shear dilation appears to be less significant. This indicates that such changes in intrinsic permeability at the DST, which are within one order of magnitude, are likely to be mostly reversible.

Full Document

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top

Document information

Published on 01/01/2005

DOI: 10.1016/j.ijrmms.2005.03.008
Licence: CC BY-NC-SA license

Document Score

0

Views 3
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?