You do not have permission to edit this page, for the following reason:
You are not allowed to execute the action you have requested.
You can view and copy the source of this page.
Return to Rojek et al 2011a.
Back to Top
Document information
Published on 01/01/2011
DOI: 10.1016/j.ijrmms.2011.06.003
Licence: CC BY-NC-SA license
Web of Science Core Collection® Times cited: 100
Crossref Cited-by Times cited: 88
OpenCitations.net Times cited: 49
OpenCitations.net - Citing documents:
- H. Huang, B. Lecampion, E. Detournay. Discrete element modeling of tool-rock interaction I: rock cutting. Int. J. Numer. Anal. Meth. Geomech. 37(13) (2012) DOI 10.1002/nag.2113
- X. He, C. Xu. Discrete element modelling of rock cutting: from ductile to brittle transition. Int. J. Numer. Anal. Meth. Geomech. 39(12) (2015) DOI 10.1002/nag.2362
- L. Songyong, C. Junfeng, L. Xiaohui. Rock Breaking by Conical Pick Assisted with High Pressure Water Jet. Advances in Mechanical Engineering 6 (2015) DOI 10.1155/2014/868041
- H. Jiang, C. Du, S. Liu, K. Gao. Fractal Characteristic of Rock Cutting Load Time Series. Discrete Dynamics in Nature and Society 2014 DOI 10.1155/2014/915136
- X. Liu, S. Liu, L. Li, X. Cui. Experiment on Conical Pick Cutting Rock Material Assisted with Front and Rear Water Jet. Advances in Materials Science and Engineering 2015 DOI 10.1155/2015/506579
- M. Nitka, J. Tejchman. Modelling of concrete behaviour in uniaxial compression and tension with DEM. Granular Matter 17(1) (2015) DOI 10.1007/s10035-015-0546-4
- M. Jiang, Y. Tan, F. Zhang, Y. Sun, H. Lei. Distinct element modeling of rock fragmentation by TBM cutter. European Journal of Environmental and Civil Engineering (2018) DOI 10.1080/19648189.2018.1498396
- J. Liu, C. Ma, Q. Zeng, K. Gao. Discrete Element Simulation of Conical Pick’s Coal Cutting Process under Different Cutting Parameters. Shock and Vibration 2018 DOI 10.1155/2018/7975141
- J. Rojek, A. Zubelewicz, N. Madan, S. Nosewicz. The discrete element method with deformable particles. Int J Numer Methods Eng 114(8) (2018) DOI 10.1002/nme.5767
- N. Madan, J. Rojek, S. Nosewicz. Convergence and stability analysis of the deformable discrete element method. Int J Numer Methods Eng 118(6) (2019) DOI 10.1002/nme.6014
- I. KARAKURT, G. AYDIN, K. AYDINER. Predictive modelling of noise level generated during sawing of rocks by circular diamond sawblades. Sadhana 38(3) (2013) DOI 10.1007/s12046-013-0117-5
- J. Rojek. Contact Modeling in the Discrete Element Method. (2018) DOI 10.1007/978-3-319-90155-8_4
- V. Dorovsky, Е. Romensky, А. Sinev. Spatially non-local model of inelastic deformations: applications for rock failure problem. Geophysical Prospecting 63(5) (2015) DOI 10.1111/1365-2478.12230
- D. He, Y. Cheng, W. Yang. Relationship of rock microscopic parameters with the elastic modulus and strength. J VIBROENG 21(4) (2019) DOI 10.21595/jve.2018.19849
- W. Liu, J. Cao, T. He, G. Gao, H. Li, Z. Yin. Optimum cutting depth and spacing of roadheader picks: a numerical simulation using a three-dimensional cracking method. Transactions of the Canadian Society for Mechanical Engineering 43(3) DOI 10.1139/tcsme-2018-0177
- C. Labra, J. Rojek, E. Oñate. Discrete/Finite Element Modelling of Rock Cutting with a TBM Disc Cutter. Rock Mech Rock Eng 50(3) (2016) DOI 10.1007/s00603-016-1133-7
- X. Li, S. Wang, S. Wang. Experimental Investigation of the Influence of Confining Stress on Hard Rock Fragmentation Using a Conical Pick. Rock Mech Rock Eng 51(1) (2017) DOI 10.1007/s00603-017-1309-9
- O. Su. Numerical Modeling of Cuttability and Shear Behavior of Chisel Picks. Rock Mech Rock Eng 52(6) (2018) DOI 10.1007/s00603-018-1644-5
- P. Menezes. Influence of rock mechanical properties and rake angle on the formation of rock fragments during cutting operation. Int J Adv Manuf Technol 90(1-4) (2016) DOI 10.1007/s00170-016-9342-5
- J. Huo, W. Wang, W. Sun, J. Ling, J. Dong. The multi-stage rock fragmentation load prediction model of tunnel boring machine cutter group based on dense core theory. Int J Adv Manuf Technol 90(1-4) (2016) DOI 10.1007/s00170-016-9375-9
- P. Menezes. Influence of cutter velocity, friction coefficient and rake angle on the formation of discontinuous rock fragments during rock cutting process. Int J Adv Manuf Technol 90(9-12) (2016) DOI 10.1007/s00170-016-9694-x
- S. Ji, S. Di, X. Long. DEM Simulation of Uniaxial Compressive and Flexural Strength of Sea Ice: Parametric Study. J. Eng. Mech. 143(1) DOI 10.1061/(asce)em.1943-7889.0000996
- L. Yanxin, L. Haibo, Z. Xiaohua, T. Liping. Bonded-cluster simulation of rock-cutting using PFC2D. Cluster Comput 20(2) (2017) DOI 10.1007/s10586-017-0808-5
- Y. Ouyang, Q. Yang, X. Chen. Bonded-Particle Model with Nonlinear Elastic Tensile Stiffness for Rock-Like Materials. Applied Sciences 7(7) (2017) DOI 10.3390/app7070686
- Q. Zeng, K. Gao, H. Zhang, S. Jiang, K. Jiang. Vibration analysis of shearer cutting system using mechanical hydraulic collaboration simulation. Proceedings of the IMechE 231(4) (2017) DOI 10.1177/1464419317705986
- Y. Dai, F. Ma, X. Zhu, H. Liu, Z. Huang, Y. Xie. Mechanical Tests and Numerical Simulations for Mining Seafloor Massive Sulfides. JMSE 7(8) (2019) DOI 10.3390/jmse7080252
- D. Billaux, F. Dedecker. Modélisation numérique des roches et fracturation : du continu au discontinu. Rev. Fr. Geotech. (155) (2018) DOI 10.1051/geotech/2018006
- Z. Sun, D. Espinoza, M. Balhoff. Discrete element modeling of indentation tests to investigate mechanisms of CO 2 ‐related chemomechanical rock alteration. J. Geophys. Res. Solid Earth 121(11) (2016) DOI 10.1002/2016jb013554
- J. Rojek. Discrete element thermomechanical modelling of rock cutting with valuation of tool wear. Comp. Part. Mech. 1(1) (2014) DOI 10.1007/s40571-014-0008-5
- M. Lanari, A. Fakhimi. Numerical study of contributions of shock wave and gas penetration toward induced rock damage during blasting. Comp. Part. Mech. 2(2) (2015) DOI 10.1007/s40571-015-0053-8
- F. Zárate, E. Oñate. A simple FEM–DEM technique for fracture prediction in materials and structures. Comp. Part. Mech. 2(3) (2015) DOI 10.1007/s40571-015-0067-2
- T. Nguyen, D. André, M. Huger. Analytic laws for direct calibration of discrete element modeling of brittle elastic media using cohesive beam model. Comp. Part. Mech. 6(3) (2019) DOI 10.1007/s40571-018-00221-0
- A. Fakhimi, S. Norouzi. Dilation angle in bonded particle simulation of rock. Comp. Part. Mech. 6(2) (2018) DOI 10.1007/s40571-018-0208-5
- M. Celigueta, S. Latorre, F. Arrufat, E. Oñate. An accurate nonlocal bonded discrete element method for nonlinear analysis of solids: application to concrete fracture tests. Comp. Part. Mech. (2019) DOI 10.1007/s40571-019-00278-5
- H. Li, E. Du. Simulation of rock fragmentation induced by a tunnel boring machine disk cutter. Advances in Mechanical Engineering 8(6) (2016) DOI 10.1177/1687814016651557
- D. Woldemichael, A. Rani, T. Lemma, K. Altaf. Numerical simulation of rock cutting using 2D AUTODYN. IOP Conf. Ser.: Mater. Sci. Eng. 100 (2015) DOI 10.1088/1757-899x/100/1/012052
- J. Rojek, A. Zubelewicz, N. Madan, S. Nosewicz. New formulation of the discrete element method. DOI 10.1063/1.5019043
- Q. Wang, H. Gao, B. Jiang, J. Yang, Z. Lv. Relationship model for the drilling parameters from a digital drilling rig versus the rock mechanical parameters and its application. Arab J Geosci 11(13) (2018) DOI 10.1007/s12517-018-3715-z
- W. Liu, X. Zhu. Experimental study of the force response and chip formation in rock cutting. Arab J Geosci 12(15) (2019) DOI 10.1007/s12517-019-4585-8
- W. Hu, Q. Tian, H. Hu. Dynamic fracture simulation of flexible multibody systems via coupled finite elements of ANCF and particles of SPH. Nonlinear Dyn 84(4) (2016) DOI 10.1007/s11071-016-2657-9
- J. Loui, U. Rao Karanam. Numerical Studies on Chip Formation in Drag-Pick Cutting of Rocks. Geotech Geol Eng 30(1) (2011) DOI 10.1007/s10706-011-9456-3
- X. Zhu, Y. Luo, W. Liu. The rock breaking and ROP increase mechanisms for single-tooth torsional impact cutting using DEM. Pet. Sci. 16(5) (2019) DOI 10.1007/s12182-019-0318-6
- X. Zhu, W. Liu, X. He. The investigation of rock indentation simulation based on discrete element method. KSCE J Civ Eng 21(4) (2016) DOI 10.1007/s12205-016-0033-4
- X. Liu, S. Liu, H. Ji. Mechanism of rock breaking by pick assisted with water jet of different modes. J Mech Sci Technol 29(12) (2015) DOI 10.1007/s12206-015-1137-3
- G. Qi, W. Zhengying, M. Hao, C. Qiao. Numerical and experimental research on the rock-breaking process of tunnel boring machine normal disc cutters. J Mech Sci Technol 30(4) (2016) DOI 10.1007/s12206-016-0329-9
- S. Liu, H. Ji, X. Liu. Effect of pick working angle on the cutting performance of a cutting head. J Braz. Soc. Mech. Sci. Eng. 39(10) (2017) DOI 10.1007/s40430-017-0806-9
- S. Miao, H. Wang, X. Guo, M. Liang, C. Kong. Microcrack Growth Behavior and CWFS Criterion Parameters Optimization of Granite with PFC. J. Test. Eval. 46(6) (2018) DOI 10.1520/jte20160450
- J. Carbonell, E. Oñate, B. Suárez. Modelling of tunnelling processes and rock cutting tool wear with the particle finite element method. Comput Mech 52(3) (2013) DOI 10.1007/s00466-013-0835-x
- M. Celigueta, S. Latorre, F. Arrufat, E. Oñate. Accurate modelling of the elastic behavior of a continuum with the Discrete Element Method. Comput Mech 60(6) (2017) DOI 10.1007/s00466-017-1453-9
Share this document
Keywords
claim authorship
Are you one of the authors of this document?