(Created page with "==1 Title, abstract and keywords<!-- Your document should start with a concise and informative title. Titles are often used in information-retrieval systems. Avoid abbreviatio...")
 
m (Move page script moved page Draft Samper 667893271 to Nigro et al 2019b)
 
(3 intermediate revisions by one other user not shown)
Line 1: Line 1:
==1 Title, abstract and keywords<!-- Your document should start with a concise and informative title. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible. Capitalize the first word of the title.
+
Published in ''Int. J. Numer. Meths. Fluid'' Vol. 25 (12), pp. 1347-1371, 1996<br />
 +
doi: 10.1002/(SICI)1097-0363(19971230)25:12<1347::AID-FLD608>3.0.CO;2-C
 +
== Abstract ==
  
Provide a maximum of 6 keywords, and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field should be used. These keywords will be used for indexing purposes.
+
This paper presents several numerical results using a vectorized version of a 3D finite element compressible and nearly incompressible Euler and Navier–Stokes code. The assumptions were set on laminar flows and Newtonian fluids.
  
An abstract is required for every document; it should succinctly summarize the reason for the work, the main findings, and the conclusions of the study. Abstract is often presented separately from the article, so it must be able to stand alone. For this reason, references and hyperlinks should be avoided. If references are essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself. -->==
+
The goal of this research is to show the capabilities of the present code to treat a wide range of problems appearing in laminar fluid dynamics towards the unification from incompressible to compressible and from inviscid to viscous flow codes.
  
 +
Several authors with different approaches have tried to attain this target in CFD with relative success. At the beginning the methods based on operator splitting and perturbation were preferred, but lately, with the wide usage of time‐marching algorithms, the preconditioning mass matrix (PMM) has become very popular. With this kind of relaxation scheme it is possible to accelerate the rate of convergence to steady state solutions with the modification of the mass matrix under certain restrictions. The selection of the mass matrix is not an easy task, but we have certain freedom to define it in order to improve the condition number of the system. In this paper we have used a physics‐based preconditioner for the GMRES implicit solver developed previously by us and an SUPG formulation for the semidiscretization of the spatial operator.
  
 +
In sections 2 and 3 we present some theoretical aspects related to the physical problem and the mathematical model, showing the inviscid and viscous flow equations to be solved and the variational formulation involved in the finite element analysis. Section 4 deals with the numerical solution of non‐linear systems of equations, with some emphasis on the preconditioned matrix‐free GMRES solver. Section 5 shows how boundary conditions were treated for both Euler and Navier–Stokes problems. Section 6 contains some aspects about vectorization on the Cray C90. The performance reached by this implementation is close to 1 Gflop using multitasking. Section 7 presents several numerical examples for both models covering a wide range of interesting problems, such as inviscid low subsonic, transonic and supersonic regimes and viscous problems with interaction between boundary layers and shock waves in either attached or separated flows.
 +
<br />
  
 
+
<pdf>Media:Draft_Samper_667893271_9145_Nigro_et_al-1997-International_Journal_for_Numerical_Methods_in_Fluids.pdf</pdf>
==2 The main text<!-- You can enter and format the text of this document by selecting the ‘Edit’ option in the menu at the top of this frame or next to the title of every section of the document. This will give access to the visual editor. Alternatively, you can edit the source of this document (Wiki markup format) by selecting the ‘Edit source’ option.
+
 
+
Most of the documents in Scipedia are written in English (write your manuscript in American or British English, but not a mixture of these). Anyhow, specific publications in other languages can be published in Scipedia. In any case, the documents published in other languages must have an abstract written in English.
+
 
+
 
+
2.1 Subsections
+
 
+
Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1, 1.2, etc. and then 1.1.1, 1.1.2, ... Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be given a brief heading. Capitalize the first word of the headings.
+
 
+
 
+
2.2 General guidelines
+
 
+
Some general guidelines that should be followed in your manuscripts are:
+
 
+
*  Avoid hyphenation at the end of a line.
+
 
+
*  Symbols denoting vectors and matrices should be indicated in bold type. Scalar variable names should normally be expressed using italics.
+
 
+
*  Use decimal points (not commas); use a space for thousands (10 000 and above).
+
 
+
*  Follow internationally accepted rules and conventions. In particular use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI.
+
 
+
 
+
2.3 Tables, figures, lists and equations
+
 
+
Please insert tables as editable text and not as images. Tables should be placed next to the relevant text in the article. Number tables consecutively in accordance with their appearance in the text and place any table notes below the table body. Be sparing in the use of tables and ensure that the data presented in them do not duplicate results described elsewhere in the article.
+
 
+
Graphics may be inserted directly in the document and positioned as they should appear in the final manuscript.
+
 
+
Number the figures according to their sequence in the text. Ensure that each illustration has a caption. A caption should comprise a brief title. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used. Try to keep the resolution of the figures to a minimum of 300 dpi. If a finer resolution is required, the figure can be inserted as supplementary material
+
 
+
For tabular summations that do not deserve to be presented as a table, lists are often used. Lists may be either numbered or bulleted. Below you see examples of both.
+
 
+
1. The first entry in this list
+
 
+
2. The second entry
+
 
+
2.1. A subentry
+
 
+
3. The last entry
+
 
+
* A bulleted list item
+
 
+
* Another one
+
 
+
You may choose to number equations for easy referencing. In that case they must be numbered consecutively with Arabic numerals in parentheses on the right hand side of the page. Below is an example of formulae that should be referenced as eq. (1].
+
 
+
 
+
2.4 Supplementary material
+
 
+
Supplementary material can be inserted to support and enhance your article. This includes video material, animation sequences, background datasets, computational models, sound clips and more. In order to ensure that your material is directly usable, please provide the files with a preferred maximum size of 50 MB. Please supply a concise and descriptive caption for each file. -->==
+
 
+
 
+
 
+
 
+
==3 Bibliography<!--
+
Citations in text will follow a citation-sequence system (i.e. sources are numbered by order of reference so that the first reference cited in the document is [1], the second [2], and so on) with the number of the reference in square brackets. Once a source has been cited, the same number is used in all subsequent references. If the numbers are not in a continuous sequence, use commas (with no spaces) between numbers. If you have more than two numbers in a continuous sequence, use the first and last number of the sequence joined by a hyphen
+
 
+
You should ensure that all references are cited in the text and that the reference list. References should preferably refer to documents published in Scipedia. Unpublished results should not be included in the reference list, but can be mentioned in the text. The reference data must be updated once publication is ready. Complete bibliographic information for all cited references must be given following the standards in the field (IEEE and ISO 690 standards are recommended). If possible, a hyperlink to the referenced publication should be given. See examples for Scipedia’s articles [1], other publication articles [2], books [3], book chapter [4], conference proceedings [5], and online documents [6], shown in references section below. -->==
+
 
+
 
+
 
+
 
+
==4 Acknowledgments<!-- Acknowledgments should be inserted at the end of the document, before the references section. -->==
+
 
+
 
+
 
+
 
+
==5 References<!--[1] Author, A. and Author, B. (Year) Title of the article. Title of the Publication. Article code. Available: http://www.scipedia.com/ucode.
+
 
+
[2] Author, A. and Author, B. (Year) Title of the article. Title of the Publication. Volume number, first page-last page.
+
 
+
[3] Author, C. (Year). Title of work: Subtitle (edition.). Volume(s). Place of publication: Publisher.
+
 
+
[4] Author of Part, D. (Year). Title of chapter or part. In A. Editor & B. Editor (Eds.), Title: Subtitle of book (edition, inclusive page numbers). Place of publication: Publisher.
+
 
+
[5] Author, E. (Year, Month date). Title of the article. In A. Editor, B. Editor, and C. Editor. Title of published proceedings. Paper presented at title of conference, Volume number, first page-last page. Place of publication.
+
 
+
[6] Institution or author. Title of the document. Year. [Online] (Date consulted: day, month and year). Available: http://www.scipedia.com/document.pdf.
+
-->==
+

Latest revision as of 11:41, 2 April 2019

Published in Int. J. Numer. Meths. Fluid Vol. 25 (12), pp. 1347-1371, 1996
doi: 10.1002/(SICI)1097-0363(19971230)25:12<1347::AID-FLD608>3.0.CO;2-C

Abstract

This paper presents several numerical results using a vectorized version of a 3D finite element compressible and nearly incompressible Euler and Navier–Stokes code. The assumptions were set on laminar flows and Newtonian fluids.

The goal of this research is to show the capabilities of the present code to treat a wide range of problems appearing in laminar fluid dynamics towards the unification from incompressible to compressible and from inviscid to viscous flow codes.

Several authors with different approaches have tried to attain this target in CFD with relative success. At the beginning the methods based on operator splitting and perturbation were preferred, but lately, with the wide usage of time‐marching algorithms, the preconditioning mass matrix (PMM) has become very popular. With this kind of relaxation scheme it is possible to accelerate the rate of convergence to steady state solutions with the modification of the mass matrix under certain restrictions. The selection of the mass matrix is not an easy task, but we have certain freedom to define it in order to improve the condition number of the system. In this paper we have used a physics‐based preconditioner for the GMRES implicit solver developed previously by us and an SUPG formulation for the semidiscretization of the spatial operator.

In sections 2 and 3 we present some theoretical aspects related to the physical problem and the mathematical model, showing the inviscid and viscous flow equations to be solved and the variational formulation involved in the finite element analysis. Section 4 deals with the numerical solution of non‐linear systems of equations, with some emphasis on the preconditioned matrix‐free GMRES solver. Section 5 shows how boundary conditions were treated for both Euler and Navier–Stokes problems. Section 6 contains some aspects about vectorization on the Cray C90. The performance reached by this implementation is close to 1 Gflop using multitasking. Section 7 presents several numerical examples for both models covering a wide range of interesting problems, such as inviscid low subsonic, transonic and supersonic regimes and viscous problems with interaction between boundary layers and shock waves in either attached or separated flows.

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top

Document information

Published on 01/01/1997

DOI: 10.1002/(SICI)1097-0363(19971230)25:12<1347::AID-FLD608>3.0.CO;2-C
Licence: CC BY-NC-SA license

Document Score

0

Times cited: 4
Views 4
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?