The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
ABSTRACT

The JMA intensity was calculated for all the important events that the Earthquake Engineering Laboratory (LIS) has recorded since 1990. First, a pre-selection was made taking into account only events that had been recorded in more than 5 sites. Every record was plotted and revised by visual inspection in order to rule out those with high noise level or poor waveform quality. A frequency domain filter was applied to each component, then in the time domain the vectorial summation was computed and data was sorted out in descending order. The amplitude at which the cummulative amplitude reached a value of 0,3s was taken to compute the JMA intensity. The results are shown in the form of graphs that relate the value of JMA to the maximum acceleration and in the form of maps showing the spatial distribution of intensities.

Keywords: Strong motion accelerograph, seismic intensity, peak ground acceleration, earthquake engineering, spectra

Back to Top

Document information

Published on 06/12/18
Accepted on 01/12/19
Submitted on 21/08/19

Volume 18, Issue 2, 2018
Licence: CC BY-NC-SA license

Document Score

0

Views 31
Recommendations 0

Share this document