(Created page with " == Abstract == Modern vehicles have electrical architectures whose complexity grows year after year due to feature growth corresponding to customer expectations. The latest...")
 
m (Scipediacontent moved page Draft Content 319605376 to Mohan 2019a)
 
(No difference)

Latest revision as of 18:13, 26 January 2021

Abstract

Modern vehicles have electrical architectures whose complexity grows year after year due to feature growth corresponding to customer expectations. The latest of the expectations, automation of the dynamic driving task however, is poised to bring about some of the largest changes seen so far. In one fell swoop, not only does required functionality for automated driving drastically increase the system complexity, it also removes the fall-back of the human driver who is usually relied upon to handle unanticipated failures after the fact. The need to architect thus requires a greater rigour than ever before, to maintain the level of safety that has been associated with the automotive industry. The work that is part of this thesis has been conducted, in close collaboration with our industrial partner Scania CV AB, within the Vinnova FFI funded project ARCHER. This thesis aims to provide a methodology for architecting during the concept phase of development, using industrial practices and principles including those from safety standards such as ISO 26262. The main contributions of the thesis are in two areas. The first area i.e. Part A contributes, (i) an analysis of the challenges of architecting automated driving, and serves as a motivation for the approach taken in the rest of this thesis, i.e. Part B where the contributions include, (ii) a definition of a viewpoint for functional safety according to the definitions of ISO 42010, (iii) a method to systematically extract information from legacy components and (iv) a process to use legacy information and architect in the presence of uncertainty to provide a work product, the Preliminary Architectural Assumptions (PAA), as required by ISO 26262. The contributions of Part B together comprise a methodology to architect the PAA.   A significant challenge in working with the industry is finding the right fit between idealized principles and practical utility. The methodology in Part B has been judged fit for purpose by different parts of the organization at Scania and multiple case studies have been conducted to assess its usefulness in collaboration with senior architects. The methodology was found to be conducive in both, generating the PAA of a quality that was deemed suitable to the organization and, to find inadequacies in the architecture that had not been found earlier using the previous non-systematic methods. The benefits have led to a commissioning of a prototype tool to support the methodology that has begun to be used in projects related to automation at Scania. The methodology will be refined as the projects progress towards completion using the experiences gained. A further impact of the work is seen in two patent filings that have originated from work on the case studies in Part B. Emanating from needs discovered during the application of the methods, these filed patents (with no prior publications) outline the future directions of research into reference architectures augmented with safety policies, that are safe in the presence of detectable faults and failures. To aid verification of these ideas, work has begun on identifying critical scenarios and their elements in automated driving, and a flexible simulation platform is being designed and developed at KTH to test the chosen critical scenarios. Efterfrågan på nya funktioner leder till en ständigt ökande komplexitet i moderna fordon, speciellt i de inbyggda datorsystemen. Införande av autonoma fordon utgör inte bara det mest aktuella exemplet på detta, utan medför också en av de största förändringar som fordonsbranschen sett. Föraren, som ”back-up” för att hantera oväntade situationer och fel, finns inte längre där vid höggradig automation, och motsvarande funktioner måste realiseras i de inbyggda system vilket ger en drastisk komplexitetsökning. Detta ställer systemarkitekter för stora utmaningar för att se till att nuvarande nivå av funktionssäkerhet bibehålls. Detta forskningsarbete har utförts i nära samarbete med Scania CV AB i det Vinnova (FFI)-finansierade projektet ARCHER. Denna licentiatavhandling har som mål att ta fram en metodik för konceptutveckling av arkitekturer, förankrat i industriell praxis och principer, omfattande bl.a. de som beskrivs i funktionssäkerhetsstandards som ISO 26262. Avhandlingen presenterar resultat inom två områden. Det första området, del A, redovisar, (i) en analys av utmaningar inom arkitekturutveckling för autonoma fordon, vilket också ger en motivering för resterande del av avhandlingen. Det andra området, del B, redovisar, (ii) en definition av en ”perspektivmodell” (en s.k. ”viewpoint” enligt ISO 42010) för funktionssäkerhet, (iii) en metod för att systematiskt utvinna information från existerande komponenter, och (iv) en process som tar fram en arbetsprodukt för ISO 26262 – Preliminära Arkitektur-Antaganden (PAA). Denna process använder sig av information från existerande komponenter – resultat (iii) och förenklar hantering av avsaknad/osäker information under arkitekturarbetet. Resultaten från del B utgör tillsammans en metodik för att ta fram en PAA. En utmaning i forskning är att finna en balans mellan idealisering och praktisk tillämpbarhet. Metodiken i del B har utvärderats i flertalet industriella fallstudier på Scania i samverkan med seniora arkitekter från industrin, och har av dessa bedömts som relevant och praktiskt tillämpningsbar. Erfarenheterna visar att metodiken stödjer framtagandet av PAA’s av   lämplig kvalitet och ger ett systematiskt sätt att hantera osäkerhet under arkitekturutvecklingen. Specifikt så gjorde metoden det möjligt att identifiera komponent-felmoder där arkitekturen inte var tillräcklig för åstadkomma önskad riskreducering, begränsningar som inte hade upptäckts med tidigare metoder. Ett prototypverktyg för att stödja metodiken har utvecklats och börjat användas på Scania i projekt relaterade till autonoma fordon. Metodiken kommer sannolikt att kunna förfinas ytterligare när dessa projekt går mot sitt slut och mer erfarenheter finns tillgängliga. Arbetet i del B har vidare lett till två patentansökningar avseende koncept som framkommit genom fallstudierna. Dessa koncept relaterar till referensarkitekturer som utökats med policies för personsäkerhet (Eng. ”safety”) för att hantera detekterbara felfall, och pekar ut en riktning för framtida forskning. För att stödja verifiering av dessa koncept har arbete inletts för att identifiera kritiska scenarios för autonom körning. En flexibel simuleringsplattform håller också på att designas för att kunna testa kritiska scenarios. Vinnova-FFI funded Project ARCHER


Original document

The different versions of the original document can be found in:

Back to Top

Document information

Published on 01/01/2019

Volume 2019, 2019
Licence: CC BY-NC-SA license

Document Score

0

Views 1
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?