R. Lohner, J. Cebral
A procedure for the generation of highly stretched grids suitable for Reynolds‐averaged Navier–Stokes (RANS) calculations is presented. In a first stage, an isotropic (Euler) mesh is generated. In a second stage, this grid is successively enriched with points in order to achieve highly stretched elements. The element reconnection is carried out using a constrained Delaunay approach. Points are introduced from the regions of lowest stretching towards the regions of highest stretching. The procedure has the advantages of not requiring any type of surface recovery, not requiring extra passes or work to mesh concave ridges/corners, and guarantees a final mesh, an essential requirement for industrial environments. Given that point placement and element quality are highly dependent for the Delaunay procedure, special procedures were developed in order to obtain optimal point placement.
Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Published on 01/01/2000
DOI: 10.1002/1097-0207(20000910/20)49:1/2<219::AID-NME930>3.0.CO;2-3Licence: CC BY-NC-SA license
Views 1Recommendations 0
Are you one of the authors of this document?