m (Cinmemj moved page Draft Samper 204459573 to Labra Onate 2009a)
 
(No difference)

Latest revision as of 13:17, 17 January 2019

Published in Communications in Numerical Methods in Engineering Vol. 25 (7), pp. 837-849, 2009
doi: 10.1002/cnm.1193

Abstract

The first step in a discrete element simulation is the discretization of the domain into a set of particles. The cost of generating a good cylindrical or spherical packing has resulted in a great number of approaches during the last years. A new algorithm is proposed for high‐density packing using a scheme that minimizes the distance between each particle. Using the support of a finite element mesh, less time is needed in order to achieve a low porosity configuration. In addition, a boundary constraint is introduced. The application of the same optimization scheme is used as a condition to force a good surface definition. The results obtained show a high efficiency for the generation of low porosity packing, achieving values smaller than 10% in 2D cases and 30% in 3D cases.


The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top

Document information

Published on 01/01/2009

DOI: 10.1002/cnm.1193
Licence: CC BY-NC-SA license

Document Score

0

Times cited: 51
Views 28
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?