J. Gutiérrez Romero, B. Servan Camas, A. García, J. Colom Cobb, J. García-Espinosa
Nowadays the marine renewable energies are getting an important role in the transformation of the energy model. And tools for predicting the performance of these new technologies are essential in their commercial development. An example of these are floating wind turbines (FWT), and this work presents the coupling and verification of a set of tools to carry out fully coupled simulation of FWTs. These tools are built on the seakeeping software SeaFEM [1, 2, 3, 4, 5] and on the aeroelastic simulator code FAST .
First, the basic features of each tools are explained. Second, a coupling strategy to assess the performance of FWTs is presented. Third, the results obtained coupling SeaFEM-FAST are used for an inter-code comparison against those obtained coupling Hydrodyn-FAST. Forth, an intensive analysis of a FWT based on the NREL 5 MW baseline is carried out taking into account the environmental conditions of the selected location. These coupled computations are carried out following the Design Load Cases proposed by IEC rules  to assess the Ultimate Limit State (ULS). Finally, some comparison and conclusions based on the obtained results are drawn.
Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Published on 15/05/19Submitted on 15/05/19
Licence: CC BY-NC-SA license
Views 10Recommendations 0
Are you one of the authors of this document?