A. Franci, M. Cremonesi, U. Perego, E. Oñate
We present a Lagrangian nodal integration method for the simulation of Newtonian and non-Newtonian free-surface fluid flows. The proposed nodal Lagrangian method uses a finite element mesh to discretize the computational domain and to define the (linear) shape functions for the unknown nodal variables, as in the standard Particle Finite Element Method (PFEM). In this approach, however, the integrals are performed over nodal patches and not over elements, and strains/stresses are defined at nodes and not at Gauss points. This allows to limit the drawbacks associated with the remeshing and leads to a more accurate stress computation than in the classical elemental PFEM. Several numerical tests, in 2D and in 3D, are presented to validate the proposed nodal PFEM. In all cases, the method has shown a very good agreement with analytical solutions and with experimental and numerical results from the literature. A thorough comparison between nodal and elemental PFEMs is also presented, focusing on crucial issues, such as solution accuracy, convergence, mass conservation and sensitivity to mesh distortion.
Diff selection: Mark the radio boxes of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.
Published on 01/01/2020
DOI: 10.1016/j.cma.2019.112816Licence: CC BY-NC-SA license
Views 14Recommendations 0
Are you one of the authors of this document?