Abstract

A substantial contribution to reduce the aerodynamic drag and consequent CO2 and NOx emissions is to integrate communication antennas in the aircraft structure. This paper presents a GLARE fuselage panel design for an integrated VHF slot antenna and discusses the results of a mechanical experimental campaign on a structural element level, in quasi-static tensile conditions. The tested specimens showed small variability in terms of stiffness and strength (typical for GLARE), little dependence on the ambient conditions, damage presence, and layup configurations and good agreement with early numerical simulations. In addition, stiffness and strength predictions, based on empirically found design values seem to correlate well with the found test values

Full document

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document

References

[1] J. Rotgerink, C. Heuts, J. Verpoorte and C. van Hengel, "VHF antenna integrated into a classical fibre metal laminate fuselage panel.," in European Conference on Multifunctional Structures, Barcelona, 2020.

[2] G. Wu and J. Yang, "The Mechanical Behavior of GLARE Laminates for Aircraft Structures," Journal of the Minerals, Metals and Materials Society, pp. 72-79, 2005.

[3] R. Alderliesten and J. Homan, "Fatigue and damage tolerance issues of Glare in aircraft structures.," International Journal of Fatigue, vol. 28, pp. 1116-1123, 2006.

[4] R. Citarella, E. Armentani, R. Sepe and F. Caputo, "FEM Simulation of a FML Full Scale Aeronautic Panel Undergoing Static Load," Industrial Engineering & Management, vol. 3, no. 1, 2014.

[5] Fokker Aerostructures, "TH3-305 - Material design values and mechanical properties of standard GLARE," Papendrecht, 2006.

[6] M. Hagenbeek, "Characterisation of Fibre Metal Laminates under Thermo-mechanical Loadings," TU Delft, Delft, 2005.

[7] University of Bristol, "Certification for Design - Reshaping the Testing Pyramid," UK Research and innovation, Swindon, 2020.

[8] F. Turon, F. Otero and X. Martinez, "Structural analyses of GLARE-GFRP transition for integrated VHF antenna on a fuselage panel," in European Conference on Multifunctional Structures, Barcelona, 2020.

Back to Top
GET PDF

Document information

Published on 15/02/21
Accepted on 15/02/21
Submitted on 15/02/21

DOI: 10.23967/emus.2020.011
Licence: CC BY-NC-SA license

Document Score

0

Views 0
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?