(No difference)

Latest revision as of 12:58, 16 January 2019

Published in Int. Journal of Solids and Structures Vol. 33 (5), pp. 647-673, 1996
doi: 10.1016/0020-7683(95)00056-G

Abstract

A coupled thermomechanical model to simulate solidification problems in casting is presented. The model is formulated from a phenomenological point of view using a general isotropic thermoelasto-plasticity theory. Generalized phase-change effects accounting for the different thermomechanical behaviour of the solidifying material during its evolution from liquid to solid have been considered. For this purpose, a phase-change function, plastic evolution equations and a temperature-dependent constitutive law have been defined. Full thermomechanical effects as well as variable thermal and mechanical boundary conditions are also taken into account.

Particular details concerning the numerical implementation of the model are given, where special emphasis is devoted to the resulting highly non-linear fully coupled finite element equations.

The behaviour of this formulation is studied first in a simple quenching problem. Finally, a cylindrical casting test problem including phase-change phenomena, temperature-dependent constitutive properties and contact effects is analysed. Numerical results are compared with laboratory measurements.


The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top

Document information

Published on 01/01/1996

DOI: 10.1016/0020-7683(95)00056-G
Licence: CC BY-NC-SA license

Document Score

0

Times cited: 22
Views 11
Recommendations 0

Share this document