Published in Computers and Structures Vol. 172, pp. 93–109, 2016
DOI: 10.1016/j.compstruc.2016.05.001.

Abstract

This paper presents the 2D and 3D numerical analysis of pullout tests on steel anchorages in concrete blocks using standard and mixed finite elements. A novel (stabilized) mixed formulation in the variables of total strain and displacements u is introduced to overcome the intrinsic deficiencies of the standard displacement-based one in the context of localization of strains, such as mesh dependency. The quasi-brittle behavior of concrete is described through an elastoplastic constitutive law with a local Rankine yielding criterion. The proposed formulation is shown to be a reliable and accurate tool, sensitive to the physical parameters of the pullout tests, but objective with respect to the adopted FE mesh. Furthermore, the mixed finite element is able to capture the correct failure mechanism with relatively coarse discretizations. At the same time, the spurious behavior of the standard formulation is not alleviated by mesh-refinement.

The PDF file did not load properly or your web browser does not support viewing PDF files. Download directly to your device: Download PDF document
Back to Top

Document information

Published on 01/01/2016

DOI: 10.1016/j.compstruc.2016.05.001
Licence: CC BY-NC-SA license

Document Score

0

Times cited: 4
Views 5
Recommendations 0

Share this document

claim authorship

Are you one of the authors of this document?