Zarate Cornejo Velázquez 2018a - Revision history

Zarate: Zarate moved page Draft Zarate 881140170 to Zarate Cornejo Velázquez 2018a

2018-02-12T14:58:03Z

Zarate moved page Draft Zarate 881140170 to Zarate Cornejo Velázquez 2018a

Zarate at 14:57, 12 February 2018

2018-02-12T14:57:07Z

Zarate at 14:54, 12 February 2018

2018-02-12T14:54:57Z

Zarate at 14:54, 12 February 2018

2018-02-12T14:54:45Z

Zarate at 14:50, 12 February 2018

2018-02-12T14:50:51Z

Zarate at 14:47, 12 February 2018

2018-02-12T14:47:16Z

Zarate at 14:41, 12 February 2018

2018-02-12T14:41:32Z

Zarate at 14:35, 12 February 2018

2018-02-12T14:35:49Z

Zarate at 14:34, 12 February 2018

2018-02-12T14:34:13Z

Zarate at 14:32, 12 February 2018

2018-02-12T14:32:07Z

← Older revision		Revision as of 14:57, 12 February 2018
Line 312:		Line 312:

	<br/>		<br/>
−
−	~~Figuras:~~
−
−	~~[[Image:draft_Zarate_881140170-image2-c.png\|600px]]~~
−
−	~~[[Image:draft_Zarate_881140170-image3-c.png\|474px]]~~
−
−	~~[[Image:draft_Zarate_881140170-image34.jpeg\|480px]]~~
−
−	~~[[Image:draft_Zarate_881140170-image35.jpeg\|228px]]~~
−
−	~~<span id='_GoBack'></span> [[Image:draft_Zarate_881140170-image6.jpeg\|486px]]~~
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image36.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image37.jpeg\|center\|384px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image38.jpeg\|240px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image39.jpeg\|center\|36px]]~~
−	\|}
−
−
−	~~[[Image:draft_Zarate_881140170-image40.jpeg\|456px]]~~
−
−	~~[[Image:draft_Zarate_881140170-image41.jpeg\|528px]]~~
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image42.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image43.jpeg\|center\|264px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image44.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image45.jpeg\|center\|264px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image46.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image47.jpeg\|center\|300px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image48.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image49.jpeg\|center\|282px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image50.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image51.jpeg\|center\|276px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image52.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image53.jpeg\|center\|258px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image54.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image55.jpeg\|center\|324px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image56.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image57.jpeg\|center\|36px]]~~
−	\|}
−
−
−	~~[[Image:draft_Zarate_881140170-image58.jpeg\|354px]]~~
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image59.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image60.jpeg\|center\|36px]]~~
−	\|}
−
−
−
−	{\|
−	\|-
−	~~\| [[Image:draft_Zarate_881140170-image61.jpeg\|36px]]~~
−	~~\| [[Image:draft_Zarate_881140170-image62.jpeg\|center\|36px]]~~
−	\|}

@@ Line 287: / Line 287: @@
 <span id='_Toc506207145'></span>
-==Actions over the calculation==
+<span id='_Toc506207144'></span><big>'''Actions over the calculation  [[Image:draft_Zarate_881140170-image31.png|30px]]  [[Image:draft_Zarate_881140170-image32.png|30px]]  [[Image:draft_Zarate_881140170-image33.png|30px]]'''</big>
-−
 The last three buttons are related to the calculation process of FEM2DEM.

@@ Line 283: / Line 283: @@
 By means of this button the mesh is generated on the defined geometry, taking into account all the conditions of load, displacement and defined materials.
- [[Image:draft_Zarate_881140170-image31.png|600px]]  [[Image:draft_Zarate_881140170-image32.png|600px]]  [[Image:draft_Zarate_881140170-image33.png|600px]]
 <span id='_Toc506207145'></span>

@@ Line 118: / Line 118: @@
 :* Default graph output: Time interval to generate data for graphs.
@@ Line 226: / Line 225: @@
 <div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
- [[Image:draft_Zarate_881140170-image24-c.png|600px]] </div>
+[[Image:draft_Zarate_881140170-image24-c.png|600px]] </div>
 <div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
 <span style="text-align: center; font-size: 75%;">''Figure 15. Material properties. ''</span></div>
-−
- In this window, the following variables are defined:
+In this window, the following variables are defined:
 :* Young: Value of the elasticity modulus of the material (Pa).
@@ Line 253: / Line 252: @@
 When any of these values is modify, it is necessary to save them associated with the name of a material. Once this is done it is possible to link an area of the geometry with a specific material. Obviously there cannot be any area left without having an associated material.
 <big>'''Assign DEM contact parameters [[Image:draft_Zarate_881140170-image25.png|30px]]'''</big>
@@ Line 263: / Line 263: @@
 <div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
 <span style="text-align: center; font-size: 75%;">''Figure 16. Contact conditions between particles''</span></div>
 <span id='_Toc506207143'></span><big>'''Define graphs in post process [[Image:draft_Zarate_881140170-image27.png|30px]]  [[Image:draft_Zarate_881140170-image28.png|30px]] '''</big>
@@ Line 278: / Line 279: @@
 Once the corresponding graph has been selected, the degree of freedom to be plotted (displacements, reactions, speeds and accelerations) is chosen by means of the "X select Field" button. In the same way we proceed using the corresponding button for the variables to be represented on the Y axis.
-<span id='_Toc506207144'></span><big>''' [[Image:draft_Zarate_881140170-image30.png|600px]] Mesh generation'''</big>
+<span id='_Toc506207144'></span><big>'''Mesh generation  [[Image:draft_Zarate_881140170-image30.png|30px]] '''</big>
 By means of this button the mesh is generated on the defined geometry, taking into account all the conditions of load, displacement and defined materials.

@@ Line 79: / Line 79: @@
 <span style="text-align: center; font-size: 75%;">''Figure 5. Use of the FEM2DEM toolbar''</span></div>
 <span id='_Toc506207137'></span><big>'''General Data [[Image:draft_Zarate_881140170-image7.png|30px]]'''</big>
@@ Line 120: / Line 119: @@
 :* <br/>
 <span id='_Toc506207138'></span><big>'''Time functions definition [[Image:draft_Zarate_881140170-image10.png|30px]]  '''</big>
@@ Line 163: / Line 163: @@
 This window also allows you to unassign, list or draw the entities to which a condition has been applied.
 <span id='_Toc506207140'></span><big>'''Assign imposed velocities  [[Image:draft_Zarate_881140170-image15.png|30px]]'''</big>
@@ Line 179: / Line 180: @@
 <div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
 <span style="text-align: center; font-size: 75%;">''Figure 11. Application of velocity conditions.''</span></div>
 <span id='_Toc506207141'></span><big>'''Assign punctual forces  [[Image:draft_Zarate_881140170-image17.png|30px]] '''</big>
@@ Line 193: / Line 195: @@
 Likewise, it is possible to remove point loads, draw them on the geometry or de-sign them.
 <big>'''Assign uniformly distributed forces [[Image:draft_Zarate_881140170-image19.jpeg|30px]]'''</big>
@@ Line 205: / Line 208: @@
 <div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
 <span style="text-align: center; font-size: 75%;">''Figure 13. Uniform distributed forces application window''</span></div>
 <span id='_Toc506207142'></span><big>'''Assign pressure forces  [[Image:draft_Zarate_881140170-image21.jpeg|30px]]'''</big>
@@ Line 215: / Line 219: @@
 <div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
 <span style="text-align: center; font-size: 75%;">''Figure 14. Assignment of pressure loads.''</span></div>
 <big>'''Assign material properties [[Image:draft_Zarate_881140170-image23.jpeg|30px]]'''</big>
@@ Line 222: / Line 227: @@
 <div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
   [[Image:draft_Zarate_881140170-image24-c.png|600px]] </div>
 <span style="text-align: center; font-size: 75%;">''Figure 15. Material properties. ''</span></div>

← Older revision	Revision as of 14:58, 12 February 2018
(No difference)

@@ Line 164: / Line 164: @@
 This window also allows you to unassign, list or draw the entities to which a condition has been applied.
-<span id='_Toc506207140'></span><big>''' [[Image:draft_Zarate_881140170-image15.png|600px]] Assign imposed velocities'''</big>
+<span id='_Toc506207140'></span><big>'''Assign imposed velocities  [[Image:draft_Zarate_881140170-image15.png|30px]]'''</big>
 In the same way that the imposed displacements are assigned, the imposed speeds on points and/or lines are assigned using the button "Assign imposed speeds" as shown in the pop-up window of Figure 11.
@@ Line 180: / Line 180: @@
 <span style="text-align: center; font-size: 75%;">''Figure 11. Application of velocity conditions.''</span></div>
-<span id='_Toc506207141'></span><big>''' [[Image:draft_Zarate_881140170-image17.png|600px]] Assign punctual forces'''</big>
+<span id='_Toc506207141'></span><big>'''Assign punctual forces  [[Image:draft_Zarate_881140170-image17.png|30px]] '''</big>
 The punctual forces assignment is done through the use of the pop-up window shown in Figure 12:
@@ Line 194: / Line 194: @@
 Likewise, it is possible to remove point loads, draw them on the geometry or de-sign them.
- [[Image:draft_Zarate_881140170-image19.jpeg|600px]]
+<big>'''Assign uniformly distributed forces [[Image:draft_Zarate_881140170-image19.jpeg|30px]]'''</big>
-−
-<big>'''Assign uniformly distributed forces'''</big>
 The assignment of uniformly distributed forces is done by using the pop-up window shown in Figure 13 and is very similar to the punctual loads case.
@@ Line 208: / Line 206: @@
 <span style="text-align: center; font-size: 75%;">''Figure 13. Uniform distributed forces application window''</span></div>
-<span id='_Toc506207142'></span><big>''' [[Image:draft_Zarate_881140170-image21.jpeg|600px]]  Assign pressure forces '''</big>
+<span id='_Toc506207142'></span><big>'''Assign pressure forces  [[Image:draft_Zarate_881140170-image21.jpeg|30px]]'''</big>
 The assignment of the pressures over the solid surfaces is carried out following the same model as the uniformly distributed loads. With the addition to provide a delay value. This value is useful in the blasting simulation where the blast holes do not explode simultaneously, but there is a certain lag between them. It is worth mentioning that the associated temporal amplitude curve will be the same for all the assigned geometrical entities.
@@ Line 218: / Line 216: @@
 <span style="text-align: center; font-size: 75%;">''Figure 14. Assignment of pressure loads.''</span></div>
- [[Image:draft_Zarate_881140170-image23.jpeg|600px]]
+<big>'''Assign material properties [[Image:draft_Zarate_881140170-image23.jpeg|30px]]'''</big>
-−
-<big>'''Assign material properties '''</big>
 The definition of the mechanical properties associated with the different materials that can be used are defined and assigned by means of the corresponding icon which presents the pop-up window shown in Figure 15
 <div class="center" style="width: auto; margin-left: auto; margin-right: auto;">
 <span style="text-align: center; font-size: 75%;">''Figure 15. Material properties. ''</span></div>
-−
-  [[Image:draft_Zarate_881140170-image24-c.png|600px]] In this window, the following variables are defined:
+  In this window, the following variables are defined:
 :* Young: Value of the elasticity modulus of the material (Pa).
@@ Line 251: / Line 248: @@
 When any of these values is modify, it is necessary to save them associated with the name of a material. Once this is done it is possible to link an area of the geometry with a specific material. Obviously there cannot be any area left without having an associated material.
- [[Image:draft_Zarate_881140170-image25.png|600px]]
+<big>'''Assign DEM contact parameters [[Image:draft_Zarate_881140170-image25.png|30px]]'''</big>
-−
-<big>'''Assign DEM contact parameters '''</big>
 The normal contact stiffness K<sub>n</sub> between spheres is the parameter defined in this section. The default value is useful in most cases.
@@ Line 263: / Line 258: @@
 <span style="text-align: center; font-size: 75%;">''Figure 16. Contact conditions between particles''</span></div>
-<span id='_Toc506207143'></span><big>''' [[Image:draft_Zarate_881140170-image27.png|600px]]  [[Image:draft_Zarate_881140170-image28.png|600px]] Define graphs in post process'''</big>
+<span id='_Toc506207143'></span><big>'''Define graphs in post process [[Image:draft_Zarate_881140170-image27.png|30px]]  [[Image:draft_Zarate_881140170-image28.png|30px]] '''</big>
 It is possible to define a maximum of 5 different graphs that allow to monitor the behaviour of the simulation. In each of them, one variable is defined on the abscissa and another on the ordinates

← Older revision		Revision as of 14:35, 12 February 2018
Line 150:		Line 150:


−	<span id='_Toc506207139'></span><big>''' Assign imposed displacement [[Image:draft_Zarate_881140170-~~image14~~.png\|30px]]'''</big>	+	<span id='_Toc506207139'></span><big>'''Assign imposed displacement [[Image:draft_Zarate_881140170-image13.png\|30px]]'''</big>

	By means of the "Assign imposed displacements" button, you access the options shown in Figure 10, which are valid for points or lines:		By means of the "Assign imposed displacements" button, you access the options shown in Figure 10, which are valid for points or lines:

@@ Line 149: / Line 149: @@
 Finally, it is important to comment that a value of 0 implies the use of the time step defined by default (Figure 7).
-==Assign imposed displacements ==
 By means of the "Assign imposed displacements" button, you access the options shown in Figure 10, which are valid for points or lines:

← Older revision		Revision as of 14:32, 12 February 2018
Line 148:		Line 148:

	Finally, it is important to comment that a value of 0 implies the use of the time step defined by default (Figure 7).		Finally, it is important to comment that a value of 0 implies the use of the time step defined by default (Figure 7).
−
−	~~[[Image:draft_Zarate_881140170-image13.png\|600px]]~~
−
−	~~<span id='_Toc506207139'></span>~~

	==Assign imposed displacements ==		==Assign imposed displacements ==