Onishi et al 2003a - Revision history

Scipediacontent at 10:56, 22 January 2021

2021-01-22T10:56:30Z

Scipediacontent: Scipediacontent moved page Draft Content 136469855 to Onishi et al 2003a

2020-10-26T10:29:30Z

Scipediacontent moved page Draft Content 136469855 to Onishi et al 2003a

Scipediacontent: Created page with " == Abstract == This study assesses five steps for Tank 241-AN-105 waste retrieval and subsequent pipeline transfer: 1. Remove supernatant liquid waste from AN-105 and transf..."

2020-10-26T10:29:27Z

Created page with " == Abstract == This study assesses five steps for Tank 241-AN-105 waste retrieval and subsequent pipeline transfer: 1. Remove supernatant liquid waste from AN-105 and transf..."

New page

== Abstract ==

This study assesses five steps for Tank 241-AN-105 waste retrieval and subsequent pipeline transfer: 1. Remove supernatant liquid waste from AN-105 and transfer it through a pipeline with inline dilution with water (1st liquid waste transfer). 2. Add water (as a diluent) to Tank AN-105. 3. Mix the saltcake waste and water with mixer pumps to dissolve soluble solids. 4. Let undissolved solids settle to the tank bottom. 5. Remove the resulting supernatant liquid waste from Tank AN-105 (2nd liquid waste transfer). To assess these five steps for waste retrieval and pipeline transfer, AN-105 waste rheology was measured and solids identified with bright field image, select area diffraction, and energy dispersive x-ray spectroscopy. By combining available in situ and laboratory data, an AN-105 specific viscosity model was developed that can change from several centiPoise of viscosity to tens of millions of centiPoise as a function of strain rate and solid concentration. This viscosity mo del was implemented into the AN-105 computer model to simulate pump jet mixing. The report also evaluates AN-105 slurry waste transfer to AP-102 and AP-104 through a 3-inch (0.07-m) pipeline.

Document type: Report

== Full document ==
<pdf>Media:Draft_Content_136469855-beopen281-5727-document.pdf</pdf>

== Original document ==

The different versions of the original document can be found in:

* [http://dx.doi.org/10.2172/15010104 http://dx.doi.org/10.2172/15010104]

* [https://digital.library.unt.edu/ark:/67531/metadc1411686/m2/1/high_res_d/15010104.pdf https://digital.library.unt.edu/ark:/67531/metadc1411686/m2/1/high_res_d/15010104.pdf]

* [http://dx.doi.org/10.2172/15010104 http://dx.doi.org/10.2172/15010104],[http://www.osti.gov/scitech/servlets/purl/15010104 http://www.osti.gov/scitech/servlets/purl/15010104],[https://academic.microsoft.com/#/detail/1547213029 https://academic.microsoft.com/#/detail/1547213029]

@@ Line 3: / Line 3: @@
 This study assesses five steps for Tank 241-AN-105 waste retrieval and subsequent pipeline transfer: 1. Remove supernatant liquid waste from AN-105 and transfer it through a pipeline with inline dilution with water (1st liquid waste transfer). 2. Add water (as a diluent) to Tank AN-105. 3. Mix the saltcake waste and water with mixer pumps to dissolve soluble solids. 4. Let undissolved solids settle to the tank bottom. 5. Remove the resulting supernatant liquid waste from Tank AN-105 (2nd liquid waste transfer). To assess these five steps for waste retrieval and pipeline transfer, AN-105 waste rheology was measured and solids identified with bright field image, select area diffraction, and energy dispersive x-ray spectroscopy. By combining available in situ and laboratory data, an AN-105 specific viscosity model was developed that can change from several centiPoise of viscosity to tens of millions of centiPoise as a function of strain rate and solid concentration. This viscosity mo del was implemented into the AN-105 computer model to simulate pump jet mixing. The report also evaluates AN-105 slurry waste transfer to AP-102 and AP-104 through a 3-inch (0.07-m) pipeline.
@@ Line 18: / Line 13: @@
 * [https://digital.library.unt.edu/ark:/67531/metadc1411686/m2/1/high_res_d/15010104.pdf https://digital.library.unt.edu/ark:/67531/metadc1411686/m2/1/high_res_d/15010104.pdf]
-* [http://dx.doi.org/10.2172/15010104 http://dx.doi.org/10.2172/15010104],[http://www.osti.gov/scitech/servlets/purl/15010104 http://www.osti.gov/scitech/servlets/purl/15010104],[https://academic.microsoft.com/#/detail/1547213029 https://academic.microsoft.com/#/detail/1547213029]
+* [https://www.scipedia.com/public/Onishi_et_al_2003a https://www.scipedia.com/public/Onishi_et_al_2003a],

← Older revision	Revision as of 10:29, 26 October 2020
(No difference)