Cinmemj: Cinmemj moved page Draft Samper 874355452 to Oller et al 2008a

2020-01-30T12:45:15Z

Cinmemj moved page Draft Samper 874355452 to Oller et al 2008a

Cinmemj at 12:43, 30 January 2020

2020-01-30T12:43:50Z

Cinmemj: Created page with "==1 Title, abstract and keywords

@@ Line 1: / Line 1: @@
-==1 Title, abstract and keywords<!-- Your document should start with a concise and informative title. Titles are often used in information-retrieval systems. Avoid abbreviations and formulae where possible. Capitalize the first word of the title.
+== Abstract ==
-Provide a maximum of 6 keywords, and avoiding general and plural terms and multiple concepts (avoid, for example, 'and', 'of'). Be sparing with abbreviations: only abbreviations firmly established in the field should be used. These keywords will be used for indexing purposes.
+A computational methodology is presented for modeling the non-linear mechanical behavior of composite structures made of FRP (Fiber-Reinforced Polymers) laminates. The model is based on the appropriate combination of the constitutive models of compounding materials, considered to behave as isolated continua, together with additional “closure equations” that characterize the micro-mechanics of the composite from a morphological point of view. To this end, any appropriate constitutive model may be selected for each phase. Each component is modeled separately and the global response is obtained by assembling all contributions taking into account the interactions between components in a general phenomenological way. To model the behavior of a single uni-directional (UD) composite laminated, a Serial-Parallel continuum approach has been developed assuming that components behave as parallel materials in the fibers alignment direction and as serial materials in orthogonal directions. Taking into account the internal morphology of the composite material, it is devised a strategy for decoupling and coupling component phases. This methodology [Rastellini 2006], named "compounding of behavior", allows to take into consideration local non linear phenomenon in the compounding materials, like damage, plasticity, etc. in a coupled manner. It is based on the proper management of homogenous constitutive models, already available for each component. In this way, it is used all developments achieved in constitutive modeling for plain materials, what makes possible the transference of this technology to composites. A laminated theory complemented with the proposed UD model is employed to describe the mechanical behavior of multi-directional laminates. A specific solution strategy for the general non linear case is proposed. It provides quick local and global convergences, what makes the model suitable for large scale structures. The model brings answers on the non-linear behavior of composites, where classical micro-mechanics formulas are restricted to their linear elastic part. The methodology is validated through several numerical analyses and contrasted against experimental data and benchmark tests.
-An abstract is required for every document; it should succinctly summarize the reason for the work, the main findings, and the conclusions of the study. Abstract is often presented separately from the article, so it must be able to stand alone. For this reason, references and hyperlinks should be avoided. If references are essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential they must be defined at their first mention in the abstract itself. -->==
+==Full Document==
+<pdf>Media:Draft_Samper_874355452_7117_cencia.pdf</pdf>
-−
-−
-==2 The main text<!-- You can enter and format the text of this document by selecting the ‘Edit’ option in the menu at the top of this frame or next to the title of every section of the document. This will give access to the visual editor. Alternatively, you can edit the source of this document (Wiki markup format) by selecting the ‘Edit source’ option.
-−
-Most of the documents in Scipedia are written in English (write your manuscript in American or British English, but not a mixture of these). Anyhow, specific publications in other languages can be published in Scipedia. In any case, the documents published in other languages must have an abstract written in English.
-−
-−
-.1 Subsections
-−
-Divide your article into clearly defined and numbered sections. Subsections should be numbered 1.1, 1.2, etc. and then 1.1.1, 1.1.2, ... Use this numbering also for internal cross-referencing: do not just refer to 'the text'. Any subsection may be given a brief heading. Capitalize the first word of the headings.
-−
-−
-.2 General guidelines
-−
-Some general guidelines that should be followed in your manuscripts are:
-−
-*  Avoid hyphenation at the end of a line.
-−
-*  Symbols denoting vectors and matrices should be indicated in bold type. Scalar variable names should normally be expressed using italics.
-−
-*  Use decimal points (not commas); use a space for thousands (10 000 and above).
-−
-*  Follow internationally accepted rules and conventions. In particular use the international system of units (SI). If other quantities are mentioned, give their equivalent in SI.
-−
-−
-.3 Tables, figures, lists and equations
-−
-Please insert tables as editable text and not as images. Tables should be placed next to the relevant text in the article. Number tables consecutively in accordance with their appearance in the text and place any table notes below the table body. Be sparing in the use of tables and ensure that the data presented in them do not duplicate results described elsewhere in the article.
-−
-Graphics may be inserted directly in the document and positioned as they should appear in the final manuscript.
-−
-Number the figures according to their sequence in the text. Ensure that each illustration has a caption. A caption should comprise a brief title. Keep text in the illustrations themselves to a minimum but explain all symbols and abbreviations used. Try to keep the resolution of the figures to a minimum of 300 dpi. If a finer resolution is required, the figure can be inserted as supplementary material
-−
-For tabular summations that do not deserve to be presented as a table, lists are often used. Lists may be either numbered or bulleted. Below you see examples of both.
-−
-. The first entry in this list
-−
-. The second entry
-−
-.1. A subentry
-−
-. The last entry
-−
-* A bulleted list item
-−
-* Another one
-−
-You may choose to number equations for easy referencing. In that case they must be numbered consecutively with Arabic numerals in parentheses on the right hand side of the page. Below is an example of formulae that should be referenced as eq. (1].
-−
-−
-.4 Supplementary material
-−
-Supplementary material can be inserted to support and enhance your article. This includes video material, animation sequences, background datasets, computational models, sound clips and more. In order to ensure that your material is directly usable, please provide the files with a preferred maximum size of 50 MB. Please supply a concise and descriptive caption for each file. -->==
-−
-−
-−
-−
-==3 Bibliography<!--
-Citations in text will follow a citation-sequence system (i.e. sources are numbered by order of reference so that the first reference cited in the document is [1], the second [2], and so on) with the number of the reference in square brackets. Once a source has been cited, the same number is used in all subsequent references. If the numbers are not in a continuous sequence, use commas (with no spaces) between numbers. If you have more than two numbers in a continuous sequence, use the first and last number of the sequence joined by a hyphen
-−
-You should ensure that all references are cited in the text and that the reference list. References should preferably refer to documents published in Scipedia. Unpublished results should not be included in the reference list, but can be mentioned in the text. The reference data must be updated once publication is ready. Complete bibliographic information for all cited references must be given following the standards in the field (IEEE and ISO 690 standards are recommended). If possible, a hyperlink to the referenced publication should be given. See examples for Scipedia’s articles [1], other publication articles [2], books [3], book chapter [4], conference proceedings [5], and online documents [6], shown in references section below. -->==
-−
-−
-−
-−
-==4 Acknowledgments<!-- Acknowledgments should be inserted at the end of the document, before the references section. -->==
-−
-−
-−
-−
-==5 References<!--[1] Author, A. and Author, B. (Year) Title of the article. Title of the Publication. Article code. Available: http://www.scipedia.com/ucode.
-−
-[2] Author, A. and Author, B. (Year) Title of the article. Title of the Publication. Volume number, first page-last page.
-−
-[3] Author, C. (Year). Title of work: Subtitle (edition.). Volume(s). Place of publication: Publisher.
-−
-[4] Author of Part, D. (Year). Title of chapter or part. In A. Editor & B. Editor (Eds.), Title: Subtitle of book (edition, inclusive page numbers). Place of publication: Publisher.
-−
-[5] Author, E. (Year, Month date). Title of the article. In A. Editor, B. Editor, and C. Editor. Title of published proceedings. Paper presented at title of conference, Volume number, first page-last page. Place of publication.
-−
-[6] Institution or author. Title of the document. Year. [Online] (Date consulted: day, month and year). Available: http://www.scipedia.com/document.pdf.
--->==

← Older revision	Revision as of 12:45, 30 January 2020
(No difference)

Oller et al 2008a - Revision history

Cinmemj: Cinmemj moved page Draft Samper 874355452 to Oller et al 2008a

Cinmemj at 12:43, 30 January 2020

Cinmemj: Created page with "==1 Title, abstract and keywords