Scipediacontent: Scipediacontent moved page Draft Content 984290605 to Olden et al 2019a

2021-02-15T09:35:35Z

Scipediacontent moved page Draft Content 984290605 to Olden et al 2019a

Scipediacontent: Created page with " == Abstract == In the present work, the metallurgical changes in the welding of clad pipelines are studied. Clad pipes consist of a complex multi-material system, with (i) t..."

2021-02-15T09:35:32Z

Created page with " == Abstract == In the present work, the metallurgical changes in the welding of clad pipelines are studied. Clad pipes consist of a complex multi-material system, with (i) t..."

New page

== Abstract ==

In the present work, the metallurgical changes in the welding of clad pipelines are studied. Clad pipes consist of a complex multi-material system, with (i) the clad being stainless steel or a nickel-based superalloy, (ii) the pipe being API X60 or X65 high-strength carbon steel, and (iii) the welding wire being a nickel-based superalloy or stainless steel in the root and hot pass, with a nickel or iron buffer layer, followed by filling with carbon steel wire. Alternatively, the corrosion resistant alloy may be used only. During production of the clad pipe, at the diffusion bonding temperature, substantial material changes may occur. These are carbon diffusion from the carbon steel to the clad, followed by the formation of hard martensite at the interface on cooling. The solidification behavior and microstructure evolution in the weld metal and in the heat-affected zone are further discussed for the different material combinations. Solidification behavior was also numerically estimated to show solidification parameters and resulting solidification modes.

Document type: Article

== Full document ==
<pdf>Media:Draft_Content_984290605-beopen759-6107-document.pdf</pdf>

== Original document ==

The different versions of the original document can be found in:

* [http://dx.doi.org/10.3390/app9153118 http://dx.doi.org/10.3390/app9153118] under the license https://creativecommons.org/licenses/by

* [http://dx.doi.org/10.3390/app9153118 http://dx.doi.org/10.3390/app9153118] under the license http://creativecommons.org/licenses/by/3.0/

* [http://hdl.handle.net/11250/2632498 http://hdl.handle.net/11250/2632498] under the license https://creativecommons.org/licenses/by/4.0

* [https://www.mdpi.com/2076-3417/9/15/3118/pdf https://www.mdpi.com/2076-3417/9/15/3118/pdf]

* [https://sintef.brage.unit.no/sintef-xmlui/handle/11250/2632498 https://sintef.brage.unit.no/sintef-xmlui/handle/11250/2632498],
: [https://academic.microsoft.com/#/detail/2966519295 https://academic.microsoft.com/#/detail/2966519295] under the license cc-by

* [https://www.mdpi.com/2076-3417/9/15/3118 https://www.mdpi.com/2076-3417/9/15/3118],
: [https://doaj.org/toc/2076-3417 https://doaj.org/toc/2076-3417]

* [https://www.mdpi.com/2076-3417/9/15/3118/pdf https://www.mdpi.com/2076-3417/9/15/3118/pdf],
: [http://dx.doi.org/10.3390/app9153118 http://dx.doi.org/10.3390/app9153118]

under the license https://creativecommons.org/licenses/by/4.0/

← Older revision	Revision as of 09:35, 15 February 2021
(No difference)

Olden et al 2019a - Revision history

Scipediacontent: Scipediacontent moved page Draft Content 984290605 to Olden et al 2019a

Scipediacontent: Created page with " == Abstract == In the present work, the metallurgical changes in the welding of clad pipelines are studied. Clad pipes consist of a complex multi-material system, with (i) t..."