2019q - Revision history

Scipediacontent at 14:12, 5 March 2021

2021-03-05T14:12:44Z

Scipediacontent: Scipediacontent moved page Draft Content 293753627 to 2019q

2021-02-03T20:03:42Z

Scipediacontent moved page Draft Content 293753627 to 2019q

Scipediacontent: Created page with "== Abstract == Ultrasonic guided wave (UGW) testing of pipelines allows long range assessments of pipe integrity from a single point of inspection. This technology uses a num..."

2021-02-03T20:03:36Z

Created page with "== Abstract == Ultrasonic guided wave (UGW) testing of pipelines allows long range assessments of pipe integrity from a single point of inspection. This technology uses a num..."

New page

== Abstract ==

Ultrasonic guided wave (UGW) testing of pipelines allows long range assessments of pipe integrity from a single point of inspection. This technology uses a number of arrays of transducers, linearly placed apart from each other to generate a single axisymmetric wave mode. The general propagation routine of the device results in a single time domain signal, which is then used by the inspectors to detect the axisymmetric wave for any defect location. Nonetheless, due to inherited characteristics of the UGW and non-ideal testing conditions, non-axisymmetric (flexural) waves will be transmitted and received in the tests. This adds to the complexity of results&rsquo

interpretation. In this paper, we implement an adaptive leaky normalized least mean square (NLMS) filter for reducing the effect of non-axisymmetric waves and enhancement of axisymmetric waves. In this approach, no modification in the device hardware is required. This method is validated using the synthesized signal generated by a finite element model (FEM) and real test data gathered from laboratory trials. In laboratory trials, six different sizes of defects with cross-sectional area (CSA) material loss of 8% to 3% (steps of 1%) were tested. To find the optimum frequency, several excitation frequencies in the region of 30&ndash

50 kHz (steps of 2 kHz) were used. Furthermore, two sets of parameters were used for the adaptive filter wherein the first set of tests the optimum parameters were set to the FEM test case and, in the second set of tests, the data from the pipe with 4% CSA defect was used. The results demonstrated the capability of this algorithm for enhancing a defect&rsquo

s signal-to-noise ratio (SNR).

Document type: Article

== Full document ==
<pdf>Media:Draft_Content_293753627-beopen6811-1037-document.pdf</pdf>

== Original document ==

The different versions of the original document can be found in:

* [http://bura.brunel.ac.uk/handle/2438/17444 http://bura.brunel.ac.uk/handle/2438/17444] under the license https://creativecommons.org/licenses/by

* [http://dx.doi.org/10.3390/app9020294 http://dx.doi.org/10.3390/app9020294]

* [http://dx.doi.org/10.3390/app9020294 http://dx.doi.org/10.3390/app9020294] under the license http://creativecommons.org/licenses/by/3.0/

* [https://www.mdpi.com/2076-3417/9/2/294/pdf https://www.mdpi.com/2076-3417/9/2/294/pdf] under the license https://creativecommons.org/licenses/by/4.0

* [http://www.mdpi.com/2076-3417/9/2/294 http://www.mdpi.com/2076-3417/9/2/294],
: [https://doaj.org/toc/2076-3417 https://doaj.org/toc/2076-3417] under the license cc-by

* [http://www.mdpi.com/2076-3417/9/2/294/pdf http://www.mdpi.com/2076-3417/9/2/294/pdf],
: [http://dx.doi.org/10.3390/app9020294 http://dx.doi.org/10.3390/app9020294]

* [https://bura.brunel.ac.uk/bitstream/2438/17444/2/Fulltext.pdf https://bura.brunel.ac.uk/bitstream/2438/17444/2/Fulltext.pdf],
: [https://bura.brunel.ac.uk/handle/2438/17444 https://bura.brunel.ac.uk/handle/2438/17444],
: [https://academic.microsoft.com/#/detail/2908803179 https://academic.microsoft.com/#/detail/2908803179] under the license https://creativecommons.org/licenses/by/4.0/

* [ ]

@@ Line 1: / Line 1: @@
 == Abstract ==
-Ultrasonic guided wave (UGW) testing of pipelines allows long range assessments of pipe integrity from a single point of inspection. This technology uses a number of arrays of transducers, linearly placed apart from each other to generate a single axisymmetric wave mode. The general propagation routine of the device results in a single time domain signal, which is then used by the inspectors to detect the axisymmetric wave for any defect location. Nonetheless, due to inherited characteristics of the UGW and non-ideal testing conditions, non-axisymmetric (flexural) waves will be transmitted and received in the tests. This adds to the complexity of results&rsquo
+Ultrasonic guided wave (UGW) testing of pipelines allows long range assessments of pipe integrity from a single point of inspection. This technology uses a number of arrays of transducers, linearly placed apart from each other to generate a single axisymmetric wave mode. The general propagation routine of the device results in a single time domain signal, which is then used by the inspectors to detect the axisymmetric wave for any defect location. Nonetheless, due to inherited characteristics of the UGW and non-ideal testing conditions, non-axisymmetric (flexural) waves will be transmitted and received in the tests. This adds to the complexity of results’ interpretation. In this paper, we implement an adaptive leaky normalized least mean square (NLMS) filter for reducing the effect of non-axisymmetric waves and enhancement of axisymmetric waves. In this approach, no modification in the device hardware is required. This method is validated using the synthesized signal generated by a finite element model (FEM) and real test data gathered from laboratory trials. In laboratory trials, six different sizes of defects with cross-sectional area (CSA) material loss of 8% to 3% (steps of 1%) were tested. To find the optimum frequency, several excitation frequencies in the region of 30–50 kHz (steps of 2 kHz) were used. Furthermore, two sets of parameters were used for the adaptive filter wherein the first set of tests the optimum parameters were set to the FEM test case and, in the second set of tests, the data from the pipe with 4% CSA defect was used. The results demonstrated the capability of this algorithm for enhancing a defect’s signal-to-noise ratio (SNR).
-−
-interpretation. In this paper, we implement an adaptive leaky normalized least mean square (NLMS) filter for reducing the effect of non-axisymmetric waves and enhancement of axisymmetric waves. In this approach, no modification in the device hardware is required. This method is validated using the synthesized signal generated by a finite element model (FEM) and real test data gathered from laboratory trials. In laboratory trials, six different sizes of defects with cross-sectional area (CSA) material loss of 8% to 3% (steps of 1%) were tested. To find the optimum frequency, several excitation frequencies in the region of 30&ndash
-−
-kHz (steps of 2 kHz) were used. Furthermore, two sets of parameters were used for the adaptive filter wherein the first set of tests the optimum parameters were set to the FEM test case and, in the second set of tests, the data from the pipe with 4% CSA defect was used. The results demonstrated the capability of this algorithm for enhancing a defect&rsquo
-−
-s signal-to-noise ratio (SNR).
 Document type: Article

← Older revision	Revision as of 20:03, 3 February 2021
(No difference)