In this paper a simple numerical model for the simulation of frictional wear behavior, within a fully nonlinear setting, including large slip and finite deformation, is presented. The model relies on the introduction of an internal variable related to the state conditions at the contact surface. Here, two possible definitions of this internal variable have been considered. The fully nonlinear frictional contact formulation, entirely derived first on a continuum setting by Laursen and Simo [2–6], has been extended here to accomodate the characterization of the wear frictional behavior.

Within the computational aspects, two families of robust time stepping algorithms, arising from an operator split of the constrained frictional evolution equations, are discussed.

Finally, following current approaches, see Lassen [9], Lassen and Bay [10], Owen et al. [11], de Souza et al. [12], Stromberg et al. [13] and Stromberg [14], a long-term tools wear prediction is given by introducing an a priori wear estimate derived from Archard's law, Archard [15].

The numerical model has been implemented into a enhanced version of the computational finite element program FEAP. Numerical examples show the suitability of the proposed model to capture the essential features of the frictional behavior at the contact interfaces and to provide a prediction of tool wear in forming operations.

The numerical model has been implemented into an enhanced version of the computational finite element program FEAP. Numerical examples and simulation of industrial metal forming processes show the performance of the numerical model in the analysis of coupled thermomechanical frictional contact problems.

This work studies four pin tools with circular, triflute, trivex, and triangular profiles adopting a validated model of FSW process developed by the authors. The effect of the rotating tool geometry on the flow behaviour and process outcomes is analysed. Additionally, longitudinal and transversal forces and torque are numerically calculated and compared for the different pin shapes. The study is carried out for slip and stick limiting friction cases between pin and workpiece.

The main novelties of the paper are a “speed-up” two-stage simulation methodology and a piecewise linear version of the constitutive model, both of them conceived for the use in real case industrial applications, where the achievement of accuracy with affordable simulation times is of importance.

The Norton-Hoff constitutive model is adopted to characterize the material behaviour during the weld. The piecewise linear version of the model developed by the authors greatly facilitates the convergence of the numerical solution ensuring both computational efficiency and accuracy. A two-stage computational procedure is applied. In the first stage, a forced transient is carried out; in the second one, the magnitudes of interest are computed.

The study shows that the proposed modelling approach can be used to predict and interpret the FSW behaviour for a specific pin geometry. Moreover, the reduction of the simulation time using the two-stage strategy can be up to 90%, compared to a standard single stage strategy.

This work describes the formulation adopted for the numerical simulation of the EBW process as well as the experimental work carried out to calibrate and validate it.

The numerical simulation of EBW involves the interaction of thermal, mechanical and metallurgical phenomena. For this reason, in this work the numerical framework couples the heat transfer process to the stress analysis to maximize accuracy. An in-house multi-physics FE software is used to deal with the numerical simulation. The definition of an ad hoc moving heat source is proposed to simulate the EB power surface distribution and the corresponding absorption within the work-piece thickness. Both heat conduction and heat radiation models are considered to dissipate the heat through the boundaries of the component. The material behavior is characterized by an apropos thermo-elasto-viscoplastic constitutive model. Titanium-alloy Ti6A14V is the target material of this work.

From the experimental side, the EB welding machine, the vacuum chamber characteristics and the corresponding operative setting are detailed. Finally, the available facilities to record the temperature evolution at different thermo-couple locations as well as to measure both distortions and residual stresses are described. Numerical results are compared with the experimental evidence.