Abstract

Recent achievements in the proactive turbine control, based on the upwind speed measurements, are described in a unified framework (as an extension of the tutorial [1]), that in turn represents a systematic view of the control activity carried out within the Swedish Wind Power Technology Center (SWPTC). A new turbine control problem statement with constraints on blade loads is reviewed. This problem statement allows the design of a new class of simultaneous speed and pitch control strategies based on the preview measurements and look-ahead calculations. A generation of a piecewise constant desired pitch angle profile which is calculated using the turbine load prediction is reviewed in this article as one of the most promising approaches. This in turn allows the reduction of the pitch actuation and the design of the collective pitch control strategy with the maximum possible actuation rate. Two turbine speed control strategies based on one-mass and two-mass models of the drivetrain are also described in this article. The strategies are compared to the existing drivetrain controller. Moreover, postprocessing technique that can be used for estimation of the turbine parameters with improved performance is also discussed. Postprocessing-based estimation of the turbine inertia moment is given as an example. All the results are illustrated by simulations with a wind speed record from the Hönö turbine, located outside of Gothenburg, Sweden.

Abstract

Sustainable management strategies for securing long–term supply of rare earth elements is priority for Europe due to a complex and interlinked production chain and its dependence on Chinese export. Among rare earth elements, neodymium captured most attention due to its essential role in a wide spectrum of applications including green–energy technologies such as wind turbines and electric vehicles. Being complementary to primary production, end–of–life recycling would diversify neodymium supply, relieve the Chinese dominance on primary production and contrast the balance problem. However, neodymium recycling at end–of–life is not yet in place. In this work, we developed a dynamic material flow model to investigate neodymium stocks and flows in the EU–28 to 2016. The analysis enabled a detailed investigation of secondary sources of neodymium, which set essential boundary conditions for material recovery and recycling. We found that roughly up to 50% of the annual neodymium demand in the EU–28 could be met by domestic secondary supply, if latent recycling potentials were turned into actual capacity. Significant energy savings and GHG emissions cut could be also attained. However, product design, end–of–life collection, and scrap price issues are primary obstacles to neodymium recovery. Thus, unless going beyong those limits, establishing and maintaining a sustainable recycling chain for neodymium in the EU–28 will remain problematic.