Abstract

Friction stir welding (FSW) process is a solid‐state joining process during which materials to be joined are not melted. As a consequence, the heat‐affected zone is smaller and the quality of the weld is better with respect to more classical welding processes. Because of extremely high strains in the neighborhood of the tool, classical numerical simulation techniques have to be extended in order to track the correct material deformations. The Arbitrary Lagrangian–Eulerian (ALE) formulation is used to preserve a good mesh quality throughout the computation. With this formulation, the mesh displacement is independent from the material displacement. Moreover, some advanced numerical techniques such as remeshing or a special computation of transition interface is needed to take into account non‐cylindrical tools. During the FSW process, the behavior of the material in the neighborhood of the tool is at the interface between solid mechanics and fluid mechanics. Consequently, a numerical model of the FSW process based on a solid formulation is compared to another one based on a fluid formulation. It is shown that these two formulations essentially deliver the same results in terms of pressures and temperatures.

Abstract

Friction stir welding process is a relatively recent welding process (patented in 1991). FSW is a solid-state joining process during which materials to be joined are not melted. During the FSW process, the behaviour of the material is at the interface between solid mechanics and fluid mechanics. In this paper, a 3D numerical model of the FSW process with a non-cylindrical tool based on a solid formulation is compared to another one based on a fluid formulation. Both models use advanced numerical techniques such as the Arbitrary Lagrangian Eulerian formulation, remeshing or the Orthogonal Sub-Grid Scale method. It is shown that these two formulations essentially deliver the same results.

Abstract

The objective of this paper is to optimise the internal structure of 3D printed parts produced by Fused Deposition Modelling (FDM) process. In 3D printing, the term infill refers to the internal structure of the part. The infill design is generally uniform throughout the part. In this paper, we propose a methodology based on an iterative process using remeshing techniques coupled to Finite Element simulation (FE simulation) to control the internal structure of the part without changing the contour. The aim of this methodology is to reinforce the part in the area where the mechanical strength must be improved in order to strengthen the structure, but also to minimize the amount of material in order to minimize the printing time. The proposed method is integrated in a computational environment using the ABAQUS (6.14) and the BL2D adaptive mesher. To validate this methodology, it has been applied on a structure subjected to four point bending. The material used for this structure is PLA (Poly lactic acid).

Abstract

Friction stir welding (FSW) process is a relatively recent welding process (patented in 1991). FSW is a solid-state joining process during which materials to be joined are not melted. During the FSW process, the behaviour of the material is at the interface between solid mechanics and fluid mechanics. In this paper, a 3D numerical model of the FSW process with a non-cylindrical tool based on a solid formulation is compared to another one based on a fluid formulation. Both models use advanced numerical techniques such as the arbitrary Lagrangian–Eulerian formulation, remeshing or the orthogonal sub-grid scale method. It is shown that these two formulations essentially deliver the same results.