Abstract

Abstract

Natural ventilation portrays an effective technique for lowering the internal temperature, without spending electricity, and directly contributes to the renewal of indoor air by establishing a healthy environment for workers. Given this, it is usual to have air vent openings located at the top of the roof (continuous roof vents), in addition to those present on the facades of sheds. In naturally ventilated buildings, it is recommended to give due importance to the provision of these openings, since depending on the proposed arrangement, the wind may or may not help in the effectiveness of this strategy. In this work, it is evaluated via computer simulation (EnergyPlus, version 8.7.0), for the climatic conditions of the city of Belo Horizonte/Brazil, the influence of the wind direction in the flow rate of indoor air through the ridge vents, of the longitudinal and transversal type, present in industrial sheds endowed with an internal source of high-intensity heat release. The results obtained show that the flow rate has a symmetrical behavior in the openings of the longitudinal continuous roof vent, that is, when an opening is with the maximum outflow of the internal air, the opening opposite the predominant wind direction is acting as an entry point for the air external. The transverse continuous roof vents are more sensitive about the wind direction since they are positioned perpendicular to the building. The best result found is for the wind situation occurring parallel to the shed, obtaining a reduction in the internal temperature of up to 1°C, an increase in the rate of air changes per hour, in the internal environment, at 1acph, and an increase of up to 10,7% in the volume of air infiltrated into the shed.

Abstract

The challenge of reducing energy consumption in buildings is fundamental for the near future, considering the impact of buildings in the overall energy demands. Mediterranean regions have a mild heating season and a hot and dry winter. Its climate is characterized by plentiful solar radiation all along the year and large daily range of temperature during the summer. Thermal inertia and insulation material properties can act in a different way along the day and the year, and the better solution for the summer can be the worst solution for the cooling season. Masonry walls that define the boundary between the interior and exterior are one of the most important components of buildings mainly for energy efficiency. Despite being one of the most common and ancient building materials, it is possible to improve its performance working in units, mortars and finishes. This work aims at studying the effect of materials with different thermal insulation and thermal mass on thermal comfort and energy savings of three types of buildings, two single-family houses and one apartment, in a Mediterranean climate. Thermal behavior of traditional and light solutions is compared and it is found that thermal comfort is similar but light solutions present lower energy consumptions for the three studied house topologies. Otherwise, this study shows that housing topology has more influence namely, when comparing energy needs.

Abstract

Abstract

Abstract