Abstract

Wire electrical discharge machining (EDM) possesses many advantages over the conventional manufacturing process. Hence, this process was used for machining of all conductive materials, especially, nowadays this is the most common process for machining of aerospace aluminum alloys. [...]

Abstract

Context
Large and thick aeronautical parts present distortion after machining because the residual stresses (RS) generated during previous manufacturing steps (heat treatment).
Before assembly, distortion is removed manually.
It is a time consuming operation and [...]

Abstract

Residual stresses and distortion in Additive Manufactured (AM) parts are two key obstacles which seriously hinder the wide application of this technology. Nowadays, understanding [...]

Abstract

The nature and distribution of residual stresses are invariably critical for fatigue life with dissimilar material joints often inducing high tensile residual stresses. A fatigue-resistant concept of weld cladding process pipelines, producing compressive residual stresses, is under [...]

Abstract

Simulation of the welding of two dissimilar materials, stainless steel and mild steel, has been carried out using finite element together with experiments to validate the method and better understand the transient temperature profiles and the stress distribution in a cladded pipe. [...]

Abstract

The potential to save trillions of BTU’s in energy usage and billions of dollars in cost on an annual basis based on use of higher strength steel in major oil and gas transmission pipeline construction is a compelling opportunity recognized by both the US Department of Energy (DOE). [...]

Abstract

This paper deals with the numerical simulation of friction stir welding (FSW) processes. FSW techniques are used in many industrial applications and [...]

Abstract

A tree generates a complicated stress distribution inside the stem during its formation, which is called 'residual growth stress (RGS)'. The RGS often induces warp in a sawn lumber such as bow, crook, and other deformation, which causes severe losses of materials and benefits in the [...]

Abstract

The build-up of residual stresses in a part during laser powder-bed fusion (LPBF) provides a significant limitation to the adoption of this process. These residual stresses may cause a part to fail during a build or fall outside the specified tolerances after fabrication. Defectfree [...]

Abstract

In recent years, the use of Triply Periodic Minimal Surface (TPMS) lattice structures has gained popularity due to their advantages like high surface to volume ratio and their lightweight potential. Nowadays, TPMS lattice structures can be seen in many fields, including aerospace [...]