Abstract

In this work, the vulnerability of an unreinforced masonry building, evaluated on the one hand by using the incremental dynamic analysis, and on the other hand by using nine representative non-linear static incremental procedures, is compared. For comparison
reasons among the different non-linear static procedures, the obtained incremental dynamic analyses results are used as reference values. The aim of this analysis is to evaluate the applicability and reliability of the diverse non-linear static procedures for unreinforced
masonry buildings, and to propose modifications oriented to improve their use in this typology of structures. For this purpose, a fully representative unreinforced masonry building of the dominating building type in the Eixample district of Barcelona, is analyzed. Furthermore, the conditional spectrum approach procedure has been applied with the aim to conveniently define the seismic demand. Regarding the definition of the fragility curves, two different methodologies were used for each non-linear static procedure and incremental dynamic analyzes. Subsequently, the corresponding damage indices as well as the damage curves were calculated and compared for the different considered peak ground acceleration values. The results of this comparison seem to confirm that the damage curves obtained by performing the NSP and by applying the Risk-UE methodology overestimate the damage corresponding to low values of the PGA and underestimate the damage for higher values of the PGA.

Abstract

Performance-Based Design is accepted commonly as the most advanced design and evaluation approach. However, its successful application depends on the ability to accurately estimate the parameters of structural response. The determination of these parameters requires applying analysis procedures where the non-linear behavior features of structures are included. This chapter presents and discusses these features of non-linear behavior and how they are incorporated in the process of static or dynamic structural analyses. Non-linear analysis allows obtaining from the seismic response significant structural response parameters such as ductility, overstrength, response reduction factor and damage thresholds. In order to illustrate the application of the non-linear analysis procedures, a set of concrete-reinforced moment-resisting framed buildings with various numbers of levels, was designed according to ACI-318 for high and very high level of seismic hazard. Their seismic safety is studied using both the static and dynamic non-linear analyses.