Abstract

In the Internet, the traffic crosses between two to eight autonomous systems before reaching its destination. Consequently, end-to-end quality of service requires provisioning across more than one domain. This paper proposes a new scheme for introducing MPLS technology into an inter-domain environment. Results obtained using the OPNET simulation platform show that extending MPLS across AS boundaries can improve the QoS perceived by the end users. This means that inter-domain traffic engineering is a promising solution for a QoS aware Internet. Document type: Part of book or chapter of book

Abstract

This paper presents and compares different TE information dissemination strategies between Path Computation Elements (PCEs) in multi-domain optical networks. In such network context, recent studies have found that path computation only with local domain visibility yields poor network performance. Accordingly, certain visibility between domains seems necessary. Aiming to fit the confidentiality requirements of the composing domains while improving the final network blocking probability, novel link aggregation techniques have been proposed, which summarize the state of network domains resources efficiently. This aggregated link information is afterwards disseminated to all the remainder domains in the network. To this end, we introduce different update triggering policies to make a good trade-off between routing information scalability and inaccuracy. The performance of all contributions has been supported by illustrative simulation results.

Abstract

During the last years, MultiProtocol Label Switching (MPLS) has been deployed by most large Service Providers (SP). The main driver for MPLS deployment is the ability to provide new services with stringent Service Level Agreements (SLAs) such as layer-2 and layer-3 Virtual Private Networks (VPNs) as well as Voice and Video over IP. Most of these services are already deployed inside single SP networks. However, customers now require world-wide VPN and VoIP services. Therefore, SPs need to collaborate to offer these services across multiple SP networks. Inside a single SP network, each node usually knows the complete topology of the network with the load and delay of all the links. Based on this information, each router is able to compute constrained paths toward any other router inside the SP network. Then, it can establish a connection and reserve resources along the computed path with the Resource reSerVation Protocol (RSVP-TE). However, when services with stringent requirements must cross multiple SP networks the computation of the path becomes a problem. Routers in different SP networks exchange routing information by using the Border Gateway Protocol (BGP). BGP provides reachability information. It does not distribute complete topology, delay and bandwidth information. One way to provide guaranteed services crossing different SPs is to delegate the computation of the paths to a Path Computation Element (PCE) that learns the topology of the different SPs. However, this requires that SPs reveal information that they usually consider confidential, their topology. In this thesis, we perform active measurements to show the difficulty to engineer the interdomain traffic with BGP. MPLS together with RSVP-TE provide much more control on the traffic. We define extensions to RSVP-TE for the protection of inter-AS MPLS paths. The aim is to be able to provide the same service guarantees as inside a domain while keeping the internal topology of SPs confidential, as required by SPs. We propose and evaluate distributed techniques relying on PCEs for the computation of interdomain constrained paths respecting the latter confidentiality requirement. (FSA 3)--UCL, 2006

Abstract

Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. V. López, J. L. Añamuro, V. Moreno, J. E. L. De Vergara, J. Aracil, C. García, J. P. Fernández-Palacios, and M. Izal, "Implementation of multi-layer techniques using FEDERICA, PASITO and OneLab network infrastructures", in 17th IEEE International Conference on Networks, ICON 2011, p. 89-94 This paper describes an implementation of multilayer techniques using the network infrastructure provided by FEDERICA, PASITO and OneLab projects. FEDERICA project provides a network infrastructure, based on virtualization capabilities in both network and computing resources, which creates custom-made virtual environments. PASITO is a layer- 2 network that connects universities and research centers in Spain. OneLab measurements tools allow carrying out highaccuracy active network measurements. Thanks to FEDERICA and PASITO, we have a multi-layer architecture where the traffic is routed based on the measurements of OneLab equipment. To carry out this experiment, we have developed a Multi-layer Traffic Engineering manager and an implementation of the Path Computation Element Protocol to solve the lack of a control plane in IP oriented networks. This work shows the feasibility of multilayer techniques as a convenient solution for network operators and it validates our Path Computation Element implementation. This work has been partially funded by the Spanish Ministry of Education and Science under project ANFORA (TEC2009-13385), by the Spanish Ministry of Industry, Tourism and Trade under PASITO project, and by the European Union under project OneLab2 (FP7-224263). Authors would like to thank Mauro Campanella (GARR, the project coordinator of FEDERICA) and Miguel Angel Sotos (RedIris) for their support to carry out this work.