Abstract

During the last years, MultiProtocol Label Switching (MPLS) has been deployed by most large Service Providers (SP). The main driver for MPLS deployment is the ability to provide new services with stringent Service Level Agreements (SLAs) such as layer-2 and layer-3 Virtual Private Networks (VPNs) as well as Voice and Video over IP. Most of these services are already deployed inside single SP networks. However, customers now require world-wide VPN and VoIP services. Therefore, SPs need to collaborate to offer these services across multiple SP networks. Inside a single SP network, each node usually knows the complete topology of the network with the load and delay of all the links. Based on this information, each router is able to compute constrained paths toward any other router inside the SP network. Then, it can establish a connection and reserve resources along the computed path with the Resource reSerVation Protocol (RSVP-TE). However, when services with stringent requirements must cross multiple SP networks the computation of the path becomes a problem. Routers in different SP networks exchange routing information by using the Border Gateway Protocol (BGP). BGP provides reachability information. It does not distribute complete topology, delay and bandwidth information. One way to provide guaranteed services crossing different SPs is to delegate the computation of the paths to a Path Computation Element (PCE) that learns the topology of the different SPs. However, this requires that SPs reveal information that they usually consider confidential, their topology. In this thesis, we perform active measurements to show the difficulty to engineer the interdomain traffic with BGP. MPLS together with RSVP-TE provide much more control on the traffic. We define extensions to RSVP-TE for the protection of inter-AS MPLS paths. The aim is to be able to provide the same service guarantees as inside a domain while keeping the internal topology of SPs confidential, as required by SPs. We propose and evaluate distributed techniques relying on PCEs for the computation of interdomain constrained paths respecting the latter confidentiality requirement. (FSA 3)--UCL, 2006

Abstract

Traffic Engineering (TE) is the stage which deals with geometric design planning and traffic operation of networks, network devices and relationship of routers for the transportation of data. TE is that feature of network engineering which concentrate on problems of performance optimization of operational networks. It involves techniques and application of knowledge to gain performance objectives, which includes movement of data through network, reliability, planning of network capacity and efficient use of network resources. This thesis addresses the problems of traffic engineering and suggests a solution by using the concept of Multi-Protocol Label Switching (MPLS). We have done simulation in Matlab environment to compare the performance of MPLS against the IP network in a simulated environment. MPLS is a modern technique for forwarding network data. It broadens routing according to path controlling and packet forwarding. In this thesis MPLS is computed on the basis of its performance, efficiency for sending data from source to destination. A MATLAB based simulation tool is developed to compare MPLS with IP network in a simulated environment. The results show the performance of MPLS network in comparison of IP network. YASSAR AZIZ, +46 73 9135296 MUHAMMAD NAEEM ASLAM +46 70 4918985

Abstract

International audience; Various Multi-Protocol Label Switching-Traffic Engineering (MPLS-TE) Routing Systems have been proposed in the literature to achieve optimization of resources utilization, Quality-of-Service (QoS) and Fast Recovery. This paper proposes a generic architecture for MPLS-TE Routing Systems, which aims to ease the classification and the analysis of these systems. Then this paper defines a set of MPLS-TE classification criteria. The combination of these criteria leads to the identification of main families of MPLS-TE Routing Systems which are finally compared and qualitatively evaluated according to a set of metrics.