Abstract

Nowadays, metallic fibre reinforced cementitious composites are widely used on many different construction elements: concrete beds, slabs, precast concrete industry, etc. Fibres reduce the crack generation due to the cementitious composite shrinkage and improves its flexural strength, toughness and durability. If metallic waste materials from the industrial manufacturing sector were used instead of using the commercially available metallic fibres, the energy of both the waste recycling process and the manufacturing of the actual commercial metallic fibres would be saved. This paper studies the use of the waste residual brass fibres generated during the electrical discharge machining process as a reinforcement on mortars. With that in mind, two different fibre types (brass covered steel and recycled brass) on two different mix proportions (0.65% and 1.3% by unit volume of mortar) were added to a self-leveling non-reinforced mortar taken as a reference to evaluate their influence on the physical, thermal and mechanical properties of the resulting mortar. According to the results, for both types of fibres studied, the higher the fibre proportion used, the higher were the density, the thermal conductivity, the flexural strength and the compressive strength.of the resulting mortars. Recycled brass fibres increased the thermal conductivity and decreased the volumetric heat capacity of the resulting mortars more than the steel fibres, which is interesting, for example, on self-levelling mortars used on radiant floor heat exchangers. However, less increase was observed on the mechanical properties of the recycled brass fibre reinforced mortars than that of the steel fibre reinforced mortars, due to the shorter length of the former fibres (5-10 mm for the recycled brass fibres, 13 mm for the steel fibres). Therefore, the parameter that controls the cutting frequency of the waste wire of the electrical discharge machine should be modified to adapt the final fibre length to that of the commercially available fibres.