Abstract

The application of PFSA-based proton exchange membranes was investigated for the production of hydrogen and sulfuric acid using a SO2-depolarized electrolyzer system. Parameters investigated included hot pressing pressure for the membrane electrode assembly (MEA) manufacturing, cell temperature, membrane thickness, catalyst loading, membrane type, and SO2 anode feed concentration. The effect of cell temperature, membrane thickness, and acid concentrations was also investigated when using a second method, where clean sulfuric acid as cathode and SO2 saturated sulfuric acid as anode were used. Electrochemical impedance spectroscopy showed that the pressure exerted in the MEA manufacturing step had a significant influence with 125 kg cm−2 yielding the highest current density. High temperatures (>80°C) and thin membranes (≈120 μm) showed the best performance while thicker membranes produced higher acid concentration when using the first system. The SO2 concentration in the anode had a significant influence with the over potential increasing with decreasing SO2 concentration. When using the second method, it was found that the SO2 solubility in sulfuric acid is important as the mass transport of the SO2 limits the overall reaction rate. From the two systems tested, the first method, that is, dry SO2 anode and liquid water cathode showed the best operational effectiveness reaching a maximum of 0.32 A cm−2 at 80°C using N115 coated with 1 mgPt cm−2 while the second system under the same conditions achieved a current density of 0.18 A cm−2 when using N117.

Abstract

International audience; This study deals with the dynamic and thermal behaviors of supercapacitors. Characterization is performed using the Electrochemical Impedance Spectroscopy (EIS) method to determine by experiment the supercapacitor's series resistance (ESR) and capacitance according to the frequency. The study deals also the particular case of the supercapacitor's spectra and the thermal shock. Finally, life test at constant temperature and the impact of the vibration on the supercapacitor's parameters are illustrated.