Abstract

Driver distraction is a leading cause of crashes. The introduction of in-vehicle technology in the last decades has added support to the driving task. However, in-vehicle technologies and handheld electronic devices may also be a threat to driver safety due to information overload and distraction. Adaptive in-vehicle information systems may be a solution to this problem. Adaptive systems could aid the driver in obtaining information from the device (by reducing information density) or prevent distraction by not presenting or delaying information when the driver’s workload is high. In this paper, we describe an on-the-road evaluation of a real-time driver workload estimator that makes use of geo-specific information. The results demonstrate the relative validity of our experimental methods and show the potential for using location-based adaptive in-vehicle systems.

Abstract

occupant protection offered by new passenger vehicles has improved, there has been growing concern about the harm that some vehicle designs may inflict on occupants of other vehicles with which they collide. Preceding analyses of crash statistics have clearly demonstrated the incompatibility between passenger sedan cars (PS) and pick-up trucks (PU) involved in side impact crashes in British Columbia. A comparison of light truck and passenger car crashes in previous literature reveals that light truck vehicles inflict greater harm than passenger cars for a number of reasons including their greater weight, stiffer structure, and higher ride height. These features place occupants of passenger cars at a disadvantage should they be involved in a collision with a light truck vehicle. The injury risk for passenger sedan car occupants is greater than the risk for pick-up truck occupants in two-vehicle crashes (Odds Ratio (OR) 1.87; 95% Confidence Interval (CI) 1.38-2.52). In addition, the risk of vehicle damage severity was increased for passenger cars compared with pick-up trucks (write off vehicle-OR 5.35; 95% CI 3.75-7.63, severely damaged vehicles-OR 5.87; 95% CI 4.79–7.19, moderately damaged vehicles-OR 2.86; 95% CI 2.44–3.36). There is strong justification for injury prevention experts and policy makers to step up motor vehicle crash injury prevention advocacy by implementing evidence-based policies to reduce rates of injury as a result of passenger sedan cars and pick-up trucks involved in side impact crashes in the province of British Columbia. Document type: Article

Abstract

Car body design in view of structural performance and lightweighting is a challenging task due to all the performance targets that must be satisfied such as vehicle safety and ride quality. In this paper, material replacement along with multidisciplinary design optimization strategy is proposed to develop a lightweight car body structure that satisfies the crash and vibration criteria while minimizing weight. Through finite element simulations, full frontal, offset frontal, and side crashes of a full car model are evaluated for peak acceleration, intrusion distance, and the internal energy absorbed by the structural parts. In addition, the first three fundamental natural frequencies are combined with the crash metrics to form the design constraints. The wall thicknesses of twenty-two parts are considered as the design variables. Latin Hypercube Sampling is used to sample the design space, while Radial Basis Function methodology is used to develop surrogate models for the selected crash responses at multiple sites as well as the first three fundamental natural frequencies. A nonlinear surrogate-based optimization problem is formulated for mass minimization under crash and vibration constraints. Using Sequential Quadratic Programming, the design optimization problem is solved with the results verified by finite element simulations. The performance of the optimum design with magnesium parts shows significant weight reduction and better performance compared to the baseline design. Document type: Article

Abstract

Intelligent transport systems are accepted as an integral part of the transport system. They have high potential in reducing the carbon footprint of traffic while improving efficient and safe transport. The calculation of CO"inf"2"/inf" emissions arising from the transport sector incorporating the impact of ITS is a challenging task. A systematic assessment methodology will support developers, public authorities and investors in ITS solutions to make sound decisions based on comparable and transparent impact estimates. As the basis for such an assessment, the fragmentation of traffic in underlying processes is suggested. These processes can be divided into transport demand related processes and driver behaviour and vehicle related processes. Together these processes lead to traffic flow. Transport processes are influenced by various factors. Both the processes itself and the factors influencing them can be affected by ITS. A systematic analysis of the potential effects of ITS on all these levels is the prerequisite for choosing a suitable modelling approach to quantify the effects. It also ensures the transparency of the modelling process by elucidating the required model sensitivities. The details of such an approach and its context from user need to a standardised assessment methodology for ITS is described. © The Institution of Engineering and Technology 2015.

Abstract

Urban-EV applies innovative manufacturing technologies and materials to produce a 2-seat urban electric"br" vehicle with enhanced range: 150km. Attending to weight and power targets, the vehicle is classified as L7e,"br" heavy quadricycle. The aim of the project is to design and test urban electric vehicles with crash behavior similar"br" to conventional vehicles. The crash configurations considered for the design include both the ones in the"br" Regulation and also the ones done by Euro NCAP. For achieving this target new materials and processes and"br" also innovative joining processes have been optimized. The result is a very light multi-material structure that"br" includes innovative solutions for energy absorption based on the use of low cost structural thermoplastic"br" components. The paper includes the description of the structure optimization process and also of the restrain"br" system that presents specific characteristics to be adapted to this kind of vehicles.