Abstract

Navigation canals are used for transport purposes. In order to allow safe navigation the water level should be kept in a certain range around the Normal Navigation Level (NNL). The water level is disturbed by known and unknown inputs, like tributaries, municipal water flows, rain, etc. Some of these inputs can be used to control the water level. If the geometry requires it, canal reaches are connected by locks. The operation of these locks sometimes can disturb the water level, if the difference between the upstream and downstream water level is large. The objective is to minimize the disturbances caused by these lock operations on the water level in order to maintain the NNL. In this work the global management of the canal reach is discussed and an option to maintain the NNL by active control is introduced. Some inputs to the system, such as other confluences or gates on the side of the locks, can be controlled automatically to react to the disturbances caused by the lock operations using model predictive control to maintain the desired water level.

Abstract

Inland navigation networks are large-scale systems that can be described by using the nonlinear Saint-Venant partial differential equations. However, as there is no analytical solution for them, simplified models are used instead for modeling purposes. This work addresses the modeling of two sub-reach systems by means of the well-known Integrator Delay Zero model. Two main scenarios are considered: in the first one, the two partial models are independently computed one from each other; the second one uses previous knowledge of the whole two sub-reach system in order to ensure the flow consistency along the system. The application of these two methodologies to a part of the navigation network in the north of France serves as the case study for this work. Peer Reviewed

Abstract

Trabajo presentado al 19th IFAC World Congress celebrado del 24 al 29 de agosto de 2014 en Cape Town (Sudafrica). In recent years, inland navigation networks benefit from the innovation of the instrumentation and SCADA systems. These data acquisition and control systems lead to a reactive asset-management of inland navigation networks. However, sensors and actuators are subject to faults due to the strong effects of the environment, aging, etc. In this paper, a sensor Fault Detection and Isolation (FDI) approach is proposed using an Integrator-Delay-Zero (IDZ) model, interval observers and the dynamic classification algorithm AUDyC. The combined use of these approaches allows the improvement of the sensor fault diagnosis. The proposed approach is introduced through the case study of the Cuinchy-Fontinettes reach in the north of France. This work is a contribution to the GEPET’Eau project which is granted by the French ministery MEDDE - GICC, the French institution ORNERC and the DGITM Peer Reviewed

Abstract

Inland navigation networks are mainly used for transport with economic and environmental benefits. In a climate change context which leads to the scarcity of the water resource, the control of navigation levels and the supervision of these networks become crucial. Thus, this paper is focused on the sensors Fault Detection and Isolation of inland navigation reaches. A modeling method based on the identification technique is proposed. Then, based on residuals, the dynamic classification algorithm AUDyC leads to the detection and diagnosis of sensors faults. Setting errors and slow drifts are considered. The proposed methods are applied on the Cuinchy- Fontinettes reach benchmark. Peer Reviewed Document type: Conference object

Abstract

Trabajo presentado a la 13th European Workshop on Advanced Control and Diagnosis (ACD 2016). Inland waterways are large-scale networks used principally for navigation. Even if the transport planning is an important issue, the water resource management is a crucial point. Indeed, navigation is not possible when there is too little or too much water inside the waterways. Hence, the water resource management of waterways has to be particularly efficient in a context of climate change and increase of water demand. This management has to be done by considering different time and space scales and still requires the development of new methodologies and tools in the topics of the Control and Informatics communities. This work addresses the problem of waterways management in terms of modeling, control, diagnosis and fault-tolerant control by focusing in the inland waterways of the north of France. A review of proposed tools and the ongoing research topics are provided in this paper. Peer Reviewed