Abstract

Adana-Tepebağ settlement is located in the south-east part of the Anatolia close to the Mediterranean Sea. This settlement is located in the center of the city, composed of unique architectural heritage with different plan typologies of historical structures, used of varied materials such as timber, brick, and stone. Traditional timber structural systems are widely used in this area. In this research, proposing a consolidation method for traditional timber structures with modern prefabricated systems in the frame of technological prefabrication criteria. Such as several joint details, lifting and storage properties, and fabrication state of the construction element and minimum waste ideal of the timber material [2]. This research is done in a historical settlement in Adana-Tepebağ. The state of the timber structures is in a high damaged condition as a result of the lack of maintenance in an extended period. Consequently, there is a need for a consolidation method for the maintenance of historical structures in that area. These analyzing criteria are applied to a historical timber structure in that settlement on a case study for showing the progress of this methodological approach. The progress of the methodology is composed of three main steps; 1-The damage and corrosion analysis of skeleton timber structure. 2-The decision method within the frame of technological prefabrication criteria of modern timber prefabricated elements on the damaged parts of this structure. 3-Data’s, which are collected from the previous two stages, are analyzed and compared. This methodological approach expected to be a rational decision method for the consolidation of historical structures in the Tepebağ settlement. Significantly partly damaged timber structures consolidation is very critical in the frame of budget and the authenticity of the building.

Abstract

This paper highlights the main objectives and some of the results of an extensive structural health monitoring (SHM) project begun in Khiva, Uzbekistan. The research team consists of experts from the University of California, Berkeley (Berkeley, USA) and Urgench State University (Urgench, Uzbekistan). According to archaeological data, the city of Khiva was established approximately 1500 years ago. The project started from Itchan Kala, the walled inner town of the city of Khiva. This paper describes results obtained for the Juma Mosque located inside of Itchan Kala. A continuous SHM became essential to ensure its preservation for humanity because a few structural anomalies were reported in the past. The ongoing project consists of three major phases. First, a terrestrial laser scanning (TLS) was deployed to capture and monitor anomalies of the monument’s geometry in 3D. A laser scanner was used, and the monument’s geometry was captured as a collection of points, which is called a “point cloud”. Second, there is a plan to monitor the monument by in-situ measurements conducted by accelerometers, position transducers and thermocouples in the next phase. The high-sensitivity accelerometers will be used to study the resonant frequencies due to the ambient vibrations. The position transducers and thermocouples will be used for measuring the thermal expansion and retraction of the monument’s minaret. They will also be used for monitoring the crack openings. Third, a finite-element (FE) model based on the as-found geometry of the point cloud will be generated. Its calibration will be based on the collected data to ensure acceptable correlations with the results of the conventional measurements. The FE model will be used for future restoration efforts to evaluate the performance and efficiency (if any) of the proposed restoration measures. This paper focuses on the results obtained for the Juma Mosque’s minaret. It discusses the major findings of the laser scanning project and estimates the minaret’s residual inclination and its taper. The paper shows that the minaret can be approximated by a truncated cone. A preliminary FE model of the minaret was developed, which will be updated based on the results of the upcoming ambient vibration study.