The purpose of this research is to evaluate work zone mobility using SHRP2 NDS naturalistic driving data. In this study, forward, rear-view video, and time series traces for traversed work zones are collected at 0.1 second intervals. Using the forward and rear-ward videos work zone configurations such as traffic control devices, area types, presence of dynamic message signs (DMS), intelligent transportation systems technologies (ITS), as well as the presence of workers and equipment are identified. These videos are also used for estimating traffic density by observing the number of vehicles surrounding the participant, and average traffic flow by observed speed and traffic density. The capacities of different work zone sections and configurations are estimated based on developed speed-flow relationships and this capacity is used to verify and calibrate the work zone capacity method defined by the newest addition of Highway Capacity Manual (HCM). The probability of breakdown is then estimated for each level of flow rates and volume to capacity ratios can be used to verify the results of HCM.

Original document

The different versions of the original document can be found in:



https://zenodo.org/record/3747771 under the license http://creativecommons.org/licenses/by/4.0/legalcode

DOIS: 10.5281/zenodo.3747771 10.5281/zenodo.3747770

Back to Top

Document information

Published on 01/01/2020

DOI: 10.5281/zenodo.3747771
Licence: CC BY-NC-SA license

Document Score


Views 0
Recommendations 0

Share this document


claim authorship

Are you one of the authors of this document?