Scipedia: Xavier Martinez's colleagues

Alessandro Calvi

Fri, 19 May 2017 13:57:52 +0200

MScEng in Civil Engineering (110/110), Politecnico di Torino, 2010. Professional Program & Executive Education at Stanford University in 2014 (Energy Innovation and Emerging Technologies) and in 2025 (Reservoir Geomechanics and Unconventional Reservoir Geomechanics). Professional experience of 15 years, 130 activities (projects, studies, due diligences, FEM calculations, Direzione Lavori, analysis and inspections) in Italy and abroad since 2010.

Alex Barbat

Fri, 21 Jul 2017 14:29:19 +0200

Civil Engineer (1970) and Doctor in Engineering (1978) by the Technical University of Iasi, Romania; Ingeniero de Caminos Canales y Puertos (1986) and Doctor Ingeniero de Caminos Canales y Puertos (1989) by the Technical University of Catalonia (UPC-BarcelonaTech, Spain. Professor of Structural Mechanics and of Earthquake Engineering at the UPC. Professor Emeritus since 2017. Senior researcher at the International Centre of Numerical Methods in Engineering (CIMNE: www.cimne.com) Barcelona, Spain. Supervisor of 38 doctoral theses. Current research interests: seismic analysis and design of structures; evaluation of the seismic damage of structures; seismic vulnerability and risk evaluation; and active and passive control of structures. Publications: 8 books, 127 articles in journals indexed in the ISI Web of Knowledge or SCOPUS and 75 peer reviewed articles in other national and international journals. Collaboration in 15 projects in the framework of RTD programs of the European Commission, 11 of them as main researcher; in 22 projects funded by Spanish Ministries, 14 of them as main researcher. 25 consultancy contracts with Spanish and international companies or institutions like the World Bank, the Inter-American Development Bank or the United Nations Office for Disaster Risk Reduction, UNISDR. Co-editor of Revista Internacional de Ingeniería de Estructuras, Quito, Ecuador and of Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, Puerto Rico. Editor of the Monograph Series in Earthquake Engineering, CIMNE, http://www.cimne.com/tiendacimne/monotema.asp?id_tema=10 President of the Spanish Association of Earthquake Engineering, AEIS; head of the Risk Assessment Group, http://rag.cimne.com/, CIMNE Doctor Honoris Causa by the by the “Ovidius” University, Constantza, Romania, by the Technical University “Gh. Asachi” of Iasi, Romania and by the Technical University of Cluj-Napoca, Romania.

Bhavinbhai Lakhani

Tue, 26 Mar 2024 15:17:20 +0100

Jesus Miguel Bairan

Mon, 09 Oct 2017 15:43:43 +0200

Joel Jurado Granados

Sat, 11 May 2019 19:17:23 +0200

Juan-Carlos Vielma-Perez

Thu, 04 May 2017 14:44:51 +0200

Please, write a brief description of your experience in research, teaching and/or education.

LEILSON JOAQUIM ARAUJO

Tue, 18 Sep 2018 21:00:43 +0200

Civil engineer, founding member of the Civil Engineering Academic Center (CAEC-IFG / FORMOSA). Both are linked to the Federal Institute of Education, Science and Technology of Goiás, Campus Formosa. Researcher in the area of numerical modeling of structures, with emphasis on concrete dams by gravity. He has knowledge and experience in the area of works supervision

Lourdes Blanco Salgado

Mon, 18 Apr 2022 14:45:27 +0200

Senior Project Manager & Technical Coordinator at AIMEN Technology Center

She holds a degree in Chemistry (Physical Chemistry) and an MSc in Welding Engineering, both from the University of Vigo (Spain). She began her career at AIMEN in 2007 in the NDT department, specializing in non-destructive testing of materials. With over 12 years of experience in composite materials, manufacturing, and testing. She also spent two months in 2014 at TPRC (ThermoPlastic Research Center), working on composite welding. She has been involved in European, national, and regional R&D projects focused on advanced manufacturing processes for composite and multi-materials in the automotive, naval, aeronautical, and wind sectors. Currently, she works at Advanced Composites Technologies as a Senior Researcher, specializing in infusion manufacturing processes for composite materials.

Oscar Fruitos Bickham

Wed, 21 Mar 2018 12:28:02 +0100

Engineering Master by the Technical University of Catalonia (UPC). Since 1997 is Coordinator of R&D area in Industrial Processes at the Center for Numerical Methods in Engineering (CIMNE). He has coordinated and worked in several research project at autonomic, national and European levels.

His innovation management experience includes the direction of metal R&D Department in COVIT company from 2003 to 2006.

He is Associate Research Professor at the Technical University of Catalonia (UPC) where he teaches Strenght of Materials and Structural Analysis undergraduate courses (1995 - present).

Ovidi Casals

Thu, 08 Mar 2018 13:28:54 +0100

PhD in Materials Science by BarcelonaTEch and MSc in Physics by the University of Barcelona. I am currently developing my professional career in "COMPASS Ingeniería y Sistemas" where my work is focused on the development and application of computational simulation software to engineering projects, including assessment of innovative civil structures, ocean energy converters and industrial processes. I was the coordinator of the participation of COMPASSIS in the EU project FIBRESHIP. I have published 6 papers in scientific indexed journals and have participated in various R&D projects of national and international scope.

Unai Morales

Sat, 30 Apr 2022 09:11:26 +0200

Mechanical Engineer graduated from UPV/EHU Engineering Technical School (University of Basque Country) in 2006. He has been working during ten years in TECNALIA RESEARCH AND INNOVATION (Basque Country R&D centre). Since 2017, he is a PhD student at the research group of Polymer and Composites Technology at Mondragon Unibertsitatea. His research is focused on Design and Optimization of 3D printed composite structures, developing lightweighting solutions and impact loading applications. He actually is involved in different fundamental research projects such as European projects or industrial transfer projects oriented to the automotive industry and mechanical engineering equipments.

Volker Mathes

Wed, 13 Jan 2021 11:14:44 +0100

The AVK, as the German professional association for fibre reinforced plastics/composites, represents the interests of producers and processors of reinforced plastics/composites on a national and a European level. The AVK was founded in 1924 and currently has over 220 member companies (in Germany and abroad) and is therefore one of the largest associations in the European composites sector.

It represents members along the entire value-added chain in the area of reinforced plastics. Its members include manufacturers and suppliers of raw materials as well as processing companies, machine-tool manufacturers, engineering firms, testing authorities and scientific

institutions. The association represents both small and medium-sized companies as well as major multinational concerns.

The AVK is integrated into a strong network of German and European partners. For example, it is one of four sponsoring associations of the GKV - the umbrella organisation of the German plastics converters industry and represented in both the executive and board.

In addition, AVK is a foundation member of the German Composites Umbrella organization “Composites Germany”. Furthermore AVK is represented on the board of the European Composites Industry Association (EuCIA).

xingkun zhou

Tue, 25 Apr 2017 14:21:22 +0200