Scipedia: Joaquín Irazábal González's friends

Alessandro Calvi

Fri, 19 May 2017 13:57:52 +0200

MScEng in Civil Engineering (110/110), Politecnico di Torino, 2010. Professional Program & Executive Education at Stanford University in 2014 (Energy Innovation and Emerging Technologies) and in 2025 (Reservoir Geomechanics and Unconventional Reservoir Geomechanics). Professional experience of 15 years, 130 activities (projects, studies, due diligences, FEM calculations, Direzione Lavori, analysis and inspections) in Italy and abroad since 2010.

Bhavinbhai Lakhani

Tue, 26 Mar 2024 15:17:20 +0100

Biruk Tadele

Fri, 14 May 2021 11:48:28 +0200

Cristian Ponce Farfán

Tue, 28 Jun 2016 10:08:42 +0200

Technical Public Works Engineer specializing in Hydrology from the Polytechnic University of Madrid (UPM) in 2007. Civil Engineer specializing in Hydraulics and Energy from the Polytechnic University of Madrid (UPM) in 2014.

I began my professional activity in the field of Hydraulic Engineering in 2006 in the company ALATEC. In 2007, I incorporated to the Water and Environment Department of Clothos S.L. until 2009. I worked on the Wastewater and Water Supply Master Plans of Canal de Isabel II.

In 2009, I started as a research engineer in the Hydraulics Laboratory of the School of Civil Engineering of the UPM. In 2014, I joined the Research in Dam Safety (SERPA). Since then, I have been working in different activities and participating in R&D projects within the research group. I worked on numerical thermal models of concrete dam construction in the ACOMBO project and I started my doctoral thesis on this topic

From 16 May 2021 to 15 Sept 2022 I worked in CIMNE-Madrid, meanly in the hydraulics models. I am also finished my doctoral thesis entitled "Thermal evolutionary studies of roller-compacted concrete dams in construction phase" on 22nd November 2021.

David J. Vicente

Fri, 27 May 2016 11:16:53 +0200

David J. Vicente received the Bachelor's Degree, and subsequently the Master's Degree, in Civil Engineering from the Technical University of Madrid in 2009 and 2011, respectively, both specialising in Hydraulics. In 2017 he presented his thesis 'Design of pressure management operations in water distribution districts and analysis of their impact' with 'Excellent Cum Laude' qualification.

He has worked on multiple research projects, being his fields of expertise the application of numerical modelling and Machine Learning-based models to different areas of Hydraulic and Environmental Engineering: “Water Distribution Systems: modelling, pressure management and leakage management”, “Dam Engineering: geometric design, thermo-mechanical modelling”, “Prediction of water quality parameters and optimization of advanced treatments” and “Air quality forecasting”.

He is currently working for CIMNE (since October 2015), in the department of “Machine Learning in Civil Engineering” where he is involved in research, technical development (programming) and proposal development at national and European level. He is author or co-author of 9 articles in scientific journals and a book chapter as well as 25 contributions to conference proceedings. He is the creator of the 'AULA ETSI UPM-CIMNE', through which he collaborates with UPM in research and development of R+D+i projects, direction of Master's Thesis and Doctoral Thesis and teaching of classes

Eduardo Soudah

Tue, 25 Apr 2017 14:43:41 +0200

Currently I am head of Biomedical Department at CIMNE and CIMNE CARDIO-LAB. My main research area is linking computational medical image and finite elements methods to create virtual medical models.

My major challenge is to integrate my knowledge gained on computational medical image and computational methods into robust and fully reliable computer models and "in silico" environments that will help the development and testing of new therapies and better disease prediction and prevention tools, in healthcare.

I am working in the area of Virtual Physiological Human(VPH) looking for new opportunities in the biomedical Sector. I have great experience in national, international R&D projects (H2020, FP7, ITEA, ARTEMIS....) and within private companies.

Emer T. Quezon

Wed, 06 Jan 2021 15:22:07 +0100

To date, I have published at least 190 research papers in various renowned worldwide journals & repositories, including three co-authored books that can be seen on Google Scholar. I also advised numerous MSc & Ph.D. students for their research studies and have been invited to examine Theses' and dissertations' final presentations & defense at various universities in Ethiopia, Eastern Africa, University of Rostock, Rostock, Germany, and the Philippines. I have been in academia for over 20 years, teaching courses in the Master's programs of Civil Engineering (Construction Engineering and Management, Highway Engineering, Transportation Engineering, and Road and Transport Engineering) in Ethiopia, Eastern Africa, and the Philippines. In addition, my 22 years of experience at the Department of Public Works and Highways, Region 02, Cagayan Valley Region, Philippines, have enhanced my knowledge and made me confident in presenting the actual situation during my class lectures and research work.

Fernando Salazar

Fri, 27 May 2016 09:34:32 +0200

Fernando Salazar received the Degree on Civil Engineering from the Technical University of Madrid in 2002, specializing in Hydraulics. He has worked in several dam and hydraulic projects, as well as in the development of emergency plans and hazard-potential classification of dams (being Mequinenza and Riba-Roja, in the Ebro river, among them). He is working for CIMNE since 2009, where he is the current Project Development Director.

He obtained his PhD at the UPC in 2017, qualified as Excellent Cum Laude. It focused on the application of machine learning techniques to dam monitoring data analysis. In this field, he was winner of an International Challenge organized by Verbund, the greatest hydropower company in Austria.

He has been involved in several research projects in the fields of hydraulics, dam engineering and dam safety. He is author or co-author of 15 papers in scientific journals, and around 50 contributions in conference proceedings.

Francisco Javier Domínguez Mota

Thu, 28 Sep 2017 03:57:46 +0200

Main interests: numerical modeling of engineering problems, modeling of shallow waters and groundwater infiltration, numerical solution of differential equations, numerical analysis, optimization, software engineering.

Coordinator of tha Aula-CIMNE Morelia, at the Universidad Michoacana, México.

President of the Mexican Association of Numerical Modeling in Engineering.

Gamachu Wakoya

Tue, 17 Aug 2021 13:59:34 +0200

Javier San Mauro

Thu, 01 Mar 2018 09:02:15 +0100

Javier San Mauro received the Degree on Civil Engineering from the Technical University of Madrid in 2011, specializing in Hydraulics and Energy and his Degree project was related to dam construction. He has fulfilled the Master on Civil Engineering Systems from the Technical University of Madrid in 2014 . He is working for CIMNE since October 2011. Nowadays he is working on the application of numerical methods to projects in the field of dam engineering.

Jifara Chimdi

Tue, 11 May 2021 16:16:17 +0200

Juan-Carlos Vielma-Perez

Thu, 04 May 2017 14:44:51 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Julio García-Espinosa

Tue, 10 May 2016 11:43:04 +0200

MSc in Naval Architecture and Marine Engineering by the Technical University of Madrid (UPM) and PhD in Civil Engineering by the Technical University of Catalonia (UPC).

Currently, I am full professor of shipbuilding technology at the Higher Technical School of Naval Architects and Offshore Engineers (ETSIN) of the Technical University of Madrid and the Deputy Director of Institutional Relations.

I conduct my research in collaboration with the Model Basin Research Group at ETSIN (CEHINAV) and the International Center for Numerical Methods in Engineering (CIMNE). My research career has focused on developing computational models for fluid-structure interaction analysis and their application to the design and verification of ships, platforms, and marine structures.

I am the author of more than 35 articles published in first-tier international journals, have presented over 80 papers at international conferences, and have participated in more than 25 European or international research projects.

Additionally, I have been the promoter and co-founder of Compass IS, a company specializing in engineering design, and Scipedia, the developer of the platforms Scipedia.com and BIM TeamUp.

LEILSON JOAQUIM ARAUJO

Tue, 18 Sep 2018 21:00:43 +0200

Civil engineer, founding member of the Civil Engineering Academic Center (CAEC-IFG / FORMOSA). Both are linked to the Federal Institute of Education, Science and Technology of Goiás, Campus Formosa. Researcher in the area of numerical modeling of structures, with emphasis on concrete dams by gravity. He has knowledge and experience in the area of works supervision

León Morera González

Tue, 28 Jun 2016 11:15:46 +0200

Miguel Angel Celigueta

Tue, 25 Apr 2017 12:44:06 +0200

I am right between Engineering and Software development.
Working at CIMNE since 2004, I have been involved and led research projects in a wide range of fields: harbours & waves, oil & gas drilling, aerodynamics, landslides, agriculture,... I developed a software for free surface flows (www.cimne.com/pfem/) and after that, one for particles (http://www.cimne.com/dem/), but I also found myself developing parts of standard CFD and structural (CSM) codes.
In these years I have become an experienced programmer mainly in Object Oriented languages (C++, Python) and also Matlab. Subversion or Git (preferably the second) are a must for the best team work.
As an Engineer, the goal of each project is my main concern, and software is just a handy tool.
The lectures on Theory of Finite Elements and structures given at the University since 2010 were a good complement to my practical work at CIMNE.

Pablo Alcaíno

Thu, 28 Dec 2017 14:39:09 +0100

I´m Civil Engineer with specialization in Structural Engineering, Master of Science in Engineering with specialization in Structural and Geotechnical Engineering, and Ph.D. candidate in Engineering Sciences.

I’ve more than 13 years of academic experience and in professional practice, mainly in the areas of structural analysis and design, analysis and vibration control; seismic damage assessment, experimental analysis of structures, and technological development and innovation.

Roberto Rosello Valera

Mon, 11 Jun 2018 16:55:34 +0200

Experienced PHD Candidate with a demonstrated history of working in the research industry. Skilled in Python, Computer Science, Data Analysis, C, and C++. Strong research professional with a Bachelor of Science (BS) focused in Computer Science from Universidad Central "Marta Abreu" de Las Villas.