Scipedia: Daniel Di Capua's friends

Alessandro Calvi

Fri, 19 May 2017 13:57:52 +0200

MScEng in Civil Engineering (110/110), Politecnico di Torino, 2010. Professional Program & Executive Education at Stanford University in 2014 (Energy Innovation and Emerging Technologies) and in 2025 (Reservoir Geomechanics and Unconventional Reservoir Geomechanics). Professional experience of 15 years, 130 activities (projects, studies, due diligences, FEM calculations, Direzione Lavori, analysis and inspections) in Italy and abroad since 2010.

Alex Barbat

Fri, 21 Jul 2017 14:29:19 +0200

Civil Engineer (1970) and Doctor in Engineering (1978) by the Technical University of Iasi, Romania; Ingeniero de Caminos Canales y Puertos (1986) and Doctor Ingeniero de Caminos Canales y Puertos (1989) by the Technical University of Catalonia (UPC-BarcelonaTech, Spain. Professor of Structural Mechanics and of Earthquake Engineering at the UPC. Professor Emeritus since 2017. Senior researcher at the International Centre of Numerical Methods in Engineering (CIMNE: www.cimne.com) Barcelona, Spain. Supervisor of 38 doctoral theses. Current research interests: seismic analysis and design of structures; evaluation of the seismic damage of structures; seismic vulnerability and risk evaluation; and active and passive control of structures. Publications: 8 books, 127 articles in journals indexed in the ISI Web of Knowledge or SCOPUS and 75 peer reviewed articles in other national and international journals. Collaboration in 15 projects in the framework of RTD programs of the European Commission, 11 of them as main researcher; in 22 projects funded by Spanish Ministries, 14 of them as main researcher. 25 consultancy contracts with Spanish and international companies or institutions like the World Bank, the Inter-American Development Bank or the United Nations Office for Disaster Risk Reduction, UNISDR. Co-editor of Revista Internacional de Ingeniería de Estructuras, Quito, Ecuador and of Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, Puerto Rico. Editor of the Monograph Series in Earthquake Engineering, CIMNE, http://www.cimne.com/tiendacimne/monotema.asp?id_tema=10 President of the Spanish Association of Earthquake Engineering, AEIS; head of the Risk Assessment Group, http://rag.cimne.com/, CIMNE Doctor Honoris Causa by the by the “Ovidius” University, Constantza, Romania, by the Technical University “Gh. Asachi” of Iasi, Romania and by the Technical University of Cluj-Napoca, Romania.

Borja Servan Camas

Wed, 25 May 2016 12:39:49 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Daniel Sá

Thu, 02 Jun 2016 15:07:00 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Francisco Javier Domínguez Mota

Thu, 28 Sep 2017 03:57:46 +0200

Main interests: numerical modeling of engineering problems, modeling of shallow waters and groundwater infiltration, numerical solution of differential equations, numerical analysis, optimization, software engineering.

Coordinator of tha Aula-CIMNE Morelia, at the Universidad Michoacana, México.

President of the Mexican Association of Numerical Modeling in Engineering.

Jesus Miguel Bairan

Mon, 09 Oct 2017 15:43:43 +0200

Juan-Carlos Vielma-Perez

Thu, 04 May 2017 14:44:51 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Julio García-Espinosa

Tue, 10 May 2016 11:43:04 +0200

MSc in Naval Architecture and Marine Engineering by the Technical University of Madrid (UPM) and PhD in Civil Engineering by the Technical University of Catalonia (UPC).

Currently, I am full professor of shipbuilding technology at the Higher Technical School of Naval Architects and Offshore Engineers (ETSIN) of the Technical University of Madrid and the Deputy Director of Institutional Relations.

I conduct my research in collaboration with the Model Basin Research Group at ETSIN (CEHINAV) and the International Center for Numerical Methods in Engineering (CIMNE). My research career has focused on developing computational models for fluid-structure interaction analysis and their application to the design and verification of ships, platforms, and marine structures.

I am the author of more than 35 articles published in first-tier international journals, have presented over 80 papers at international conferences, and have participated in more than 25 European or international research projects.

Additionally, I have been the promoter and co-founder of Compass IS, a company specializing in engineering design, and Scipedia, the developer of the platforms Scipedia.com and BIM TeamUp.

LEILSON JOAQUIM ARAUJO

Tue, 18 Sep 2018 21:00:43 +0200

Civil engineer, founding member of the Civil Engineering Academic Center (CAEC-IFG / FORMOSA). Both are linked to the Federal Institute of Education, Science and Technology of Goiás, Campus Formosa. Researcher in the area of numerical modeling of structures, with emphasis on concrete dams by gravity. He has knowledge and experience in the area of works supervision

Lourdes Blanco Salgado

Mon, 18 Apr 2022 14:45:27 +0200

Senior Project Manager & Technical Coordinator at AIMEN Technology Center

She holds a degree in Chemistry (Physical Chemistry) and an MSc in Welding Engineering, both from the University of Vigo (Spain). She began her career at AIMEN in 2007 in the NDT department, specializing in non-destructive testing of materials. With over 12 years of experience in composite materials, manufacturing, and testing. She also spent two months in 2014 at TPRC (ThermoPlastic Research Center), working on composite welding. She has been involved in European, national, and regional R&D projects focused on advanced manufacturing processes for composite and multi-materials in the automotive, naval, aeronautical, and wind sectors. Currently, she works at Advanced Composites Technologies as a Senior Researcher, specializing in infusion manufacturing processes for composite materials.

Mariano Padilla

Fri, 17 Nov 2017 16:13:48 +0100

A goal and result oriented professional with extensive and diverse experience in multiple IT environments. I bring to your organization cost effective implementation and design of IT projects. My experiences include manufacturing, entertainment, executive offices, laboratory research environments and post-production facilities projects. I am capable of leading software development teams with staff scheduling, milestones, prioritization and organization of projects within budget. I have supervised medium sized IT Staff.

Specialties: Management, information technology, research, hardware and software, salary arbitration, staff performance evaluation, budget conscious and deadline driven.

Mauricio Pohl

Wed, 11 Oct 2017 16:44:19 +0200

Throughout my academic and professional career I have contributed on several levels to the development of Engineering both nationally and internationally. I am confident that my work has allowed applied sciences and new method implementation for enginnering to converge.

I have work on showing how numerical methods for modelling and solving real engineering problems is something of great value, from the study of wetlands of international interest to brain models for computer assisted brain surgery.

The biggest academic achievement so far has been to stablish a new technology on a world level to solve the electroencephalography inverse problem, which is to say, the detection of potential generating sources in electroencephalography signals. This was the study I performed during my doctorate program, where I stablished said methodology using a meshless finite element approach, merging anatomical information and temporal lobe epilepsy patient functional information.

My work as a professor and researcher has always been linked to life condition improvement for the people, to the development and growth of our country and the latin american region.

Therefore, I am convinced that scientific research must be rigorous and applied at the same time. Research constitutes a catalyst element of wellbeing and development. As such, the advancement in innovative proposals, in concepts, in appropriate technologies, requires knowledge, commitment and, overall, responsibility inside academic work.

Likewise, I consider that teaching must be always getting feedback from national and international research.

Engineering, in any area, is a living and dynamic concept, grounded both in technique and science, but that must have its output in a practical application always looking to transform the observed reality.

Melba Navarro

Wed, 20 Sep 2017 09:49:04 +0200

Experienced researcher in the biomaterials field, in particular in the development of new 3D structures for tissue engineering. More than 16 years of experience participating in the design, development and management of innovation projects both, at national an international level. Experience working in multicultural and multidisciplinary environments, in R&D centers in 6 different countries. Currently focused on science to market, technology transfer processes at CIMNE Tecnología.

Michael Alvarez González

Wed, 18 Mar 2020 13:00:41 +0100

Dr. C. Ing. Higrógrafo–geodesta con probada experiencia en proyectos de conservación y creación de redes geodésicas para el aseguramiento plano altimétricos de obras constructivas, movimientos de tierra y cubicación, levantamiento topográfico directo en campo y su procesamiento digital en gabinete con el empleo de Sistemas de Posicionamiento Global (GPS) y Estaciones Totales (TPS) o métodos tradicionales con equipos ópticos para el levantamientos de conductoras y redes de abasto, tanques de agua, plantas de tratamiento de residuales, estudios de factibilidad y riesgos hidrológicos de inundación en cuencas hidrográficas, levantamiento arquitectónico de obras de fábrica en tercera dimensión (3D), empleo de imágenes aerofotogramétricas con cámaras métricas y no métricas para levantamientos topográficos y arquitectónicos, imágenes satelitales o aerosatelitales y el correspondiente procesamiento digital de estas para el empleo en estudios terrestres o marítimos costeros de la dinámica de costa y su vulnerabilidad apoyándose en la realización previa de estudios oceanográficos correspondientes; conocimiento y dominio sobre el empleo de las señales de ayuda a la navegación marítima, dominio de las herramientas informáticas para Sistemas de Diseño Asistido por Computadora (CAD) y de Diseño Ingenieril Asistido (CAE), conocimientos avanzados en la creación de Sistemas de Información Geográfica (SIG) y en la creación de Modelos Digitales del Terreno (MDT) empleando múltiples técnicas en dependencia de los materiales iniciales y finalidad del proyecto, con nociones básicas de elementos de programación y diseño en función de la simulación y visualización científica de fenómenos naturales en el dominio del espacio-tiempo y sus factores estadísticos correspondientes.

Ovidi Casals

Thu, 08 Mar 2018 13:28:54 +0100

PhD in Materials Science by BarcelonaTEch and MSc in Physics by the University of Barcelona. I am currently developing my professional career in "COMPASS Ingeniería y Sistemas" where my work is focused on the development and application of computational simulation software to engineering projects, including assessment of innovative civil structures, ocean energy converters and industrial processes. I was the coordinator of the participation of COMPASSIS in the EU project FIBRESHIP. I have published 6 papers in scientific indexed journals and have participated in various R&D projects of national and international scope.

Pablo Alcaíno

Thu, 28 Dec 2017 14:39:09 +0100

I´m Civil Engineer with specialization in Structural Engineering, Master of Science in Engineering with specialization in Structural and Geotechnical Engineering, and Ph.D. candidate in Engineering Sciences.

I’ve more than 13 years of academic experience and in professional practice, mainly in the areas of structural analysis and design, analysis and vibration control; seismic damage assessment, experimental analysis of structures, and technological development and innovation.

Ramon Ribó

Mon, 23 May 2016 21:56:01 +0200

I am the CEO of Compass Ingenieria y Sistemas, SA a technological company that develops and comercializes software for engineering simulation.

As a Civil Engineer pHD, I am interested in technological innovation, specially from a business point of view.
My personal objective is to understand how to add value from the I+D to the enterprise and create products that can enter into competition in the international technological market.

Specialties: My field of knowledge is about developing great software for Computer Simulation in Engineering including Structural Analysis, Mesh generation, CFD, etc.

Simone Mancini

Wed, 31 May 2017 14:49:14 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Sonia A. G. Oliveira

Fri, 22 Sep 2017 22:32:17 +0200

I hold a bachelor's degree and a Master´s Degree in Mechanical Engineering from the Federal University of Uberlândia/UFU (1983 and 1988). I hold also a Master's Degree in Applied Mathematics (1993) and PhD in Engineering (1995) from Brown University. In 2002-2003, I went to Barcelona/Spain for Post-Doctoral stay at CIMNE / Quantech. I was a professor at the School of Mechanical Engineering/UFU from July 1987 to March 2017. I am currently a Volunteer Professor at the Federal University of Uberlândia/UFU. I have experience in Mechanical Engineering, with emphasis on Mechanics of Solid, Elastic and Plastic Bodies, working mainly on the following topics: Simulation of forming processes and contact mechanics, finite elements simulations, stress and strain analysis and biomechanics. I am a member of the CIMNE Classroom Network (Agreement with the International Center for Numerical Methods in Enginery / UPC / Spain) since 2004, and I am the Coordinator of the FEMEC-CIMNE Classroom that houses the activities of this agreement. From June of 2006 to December of 2008 I acted as Director of Intellectual Property and Innovation of UFU. I participated as professor of the Graduation Program in Mechanical Engineering/FEMEC/UFU since 1996.

Xavier Martinez

Mon, 09 Oct 2017 13:01:04 +0200

1994-2001: Studies of Civil Engineering (Bachelor and Master Degree) at the Technical University of Catalonia (UPC).

2001-2004: Project engineer at Pedelta S.L. Role as main project engineer in the design of bridges, footbridges and other special structures.

2004-2008: Doctoral studies in the Structural Analysis program of the Strength of Materials and Structural Engineering Department, of the UPC. These studies were conducted with a fellowship provided by the International Centre for Numerical Methods in Engineering (CIMNE).

2008: Dissertation of the PhD: “Micro-mechanical simulation of composite materials using the serial/parallel mixing theory” supervised by Dr. Sergio Oller.

2008-2009: Visiting scientist and Post-Doctoral Fellow at the Mechanical and Aerospace Engineering (MAE) department of the West Virginia University (WVU). The main task conducted in this period is the coordination of the “Resilient Tunnel Project” sponsored by Homeland Security (budget > $5,000,000)

2009-2014: Visiting professor at the Science and Nautical Engineering Department (DCEN) of the UPC. The teaching activity is conducted at the School of Nautical Studies (FNB) and at the School of Civil Engineering (ETSECCPB).

2012: Research stay at the MAE department of WVU

2013-17: Vice-dean Director of Studies at the FNB

2014: Contracted as Visiting lecturer at DCEN

2015: Board member of the Spanish Association of Composite Materials (AEMAC)

2017: Editor of the scientific journal Materiales Compuestos (Composite Materials) edited by AEMAC.

2018: Contracted as associate professor at DCEN

2019: Coordinator of the Master's program on Naval and Ocean Engineering

Currently working in three european projects related to composite materials: Fibre4Yards, Fibregy and Acasisas. In the former one acting as PI of the whole project.

Scientific production:

27 papers published in indexed journals (21 of them in Q1). 4 papers in non-indexed journals. 8 books and book chapters. More than 50 contributions to national and international conferences.

H-Index of 11, according to Scopus Database.

Research projects:

Participation in 1 research project in the United States, 9 European projects, 6 national (Spanish) projects, 1 project in collaboration between WVU and CIMNE and 6 projects for the industry.

Editor of 1 scientific journal and reviewer of 9 scientific journals. Co-Chair of two editions of the European Confernece on Multifunctional Structures (EMuS).