Scipedia: Materiales Compuestos's friends

Andrés Pedraza

Fri, 10 Jun 2022 10:57:22 +0200

Hey there! I'm using SCIENCE

Bhavinbhai Lakhani

Tue, 26 Mar 2024 15:17:20 +0100

Cristian Builes

Tue, 15 Apr 2025 10:57:29 +0200

Researcher composite materials | MSc. Mechanics of materials and structures | Ph. D in Technology: Composites Manufacturing

Aeronautical engineer with over 6 years experience in the field of manufacturing processes for carbon fiber-based thermosetting materials, mainly for aeronautical industry. Liquid composite molding techniques as liquid resin infusion (LRI), and conventional and high-pressure resin transfer molding (RTM/HP-RTM)

JORGE LUIS AKASAKI

Sat, 07 May 2022 19:22:17 +0200

He holds a degree in Civil Engineering from the Pontifical Catholic University of Campinas (1986), a Master's in Architecture and Urbanism from the University of São Paulo - EESC - USP (1995), a PhD in Architecture and Urbanism from the University of São Paulo - FAU - USP (1999) and postdoctoral fellow at the Universidad Politécnica de Valencia - Spain - Departamento de Ingeniería de la Construcción y Proyectos de Ingeniería Civil (2002/2003, 2006/2007 and 2010/2011). He is currently a professor at the Universidade Estadual Paulista Júlio de Mesquita Filho. He has experience in Civil Engineering, with emphasis on Alternative Construction Material, working mainly on the following topics: mortar, concrete, structural masonry, rubber residues, rice husk ash (CCA), sugarcane bagasse ash. sugar (CBC), sludge ash from wastewater treatment plants, bamboo and geopolymers.

Juan-Antonio Almazán-Lázaro

Sat, 30 Apr 2022 11:28:03 +0200

Researcher and Associate Lecturer at the Mechanical and Mining Department of University of Jaén.

Expertise in composite material manufacturing and CAE for Design and Validation.

Lourdes Blanco Salgado

Mon, 18 Apr 2022 14:45:27 +0200

Senior Project Manager & Technical Coordinator at AIMEN Technology Center

She holds a degree in Chemistry (Physical Chemistry) and an MSc in Welding Engineering, both from the University of Vigo (Spain). She began her career at AIMEN in 2007 in the NDT department, specializing in non-destructive testing of materials. With over 12 years of experience in composite materials, manufacturing, and testing. She also spent two months in 2014 at TPRC (ThermoPlastic Research Center), working on composite welding. She has been involved in European, national, and regional R&D projects focused on advanced manufacturing processes for composite and multi-materials in the automotive, naval, aeronautical, and wind sectors. Currently, she works at Advanced Composites Technologies as a Senior Researcher, specializing in infusion manufacturing processes for composite materials.

Marta Cerdeira Peinado

Tue, 16 May 2023 08:04:25 +0200

Ingeniera de Innovación de producto en Talgo. Con formación académica en Ingeniería Industrial y Materiales, por la Universidad Politécnica de Madrid.

Sara Dasilva

Fri, 16 May 2025 18:17:57 +0200

Senior Researcher Composites

Xavier Martinez

Mon, 09 Oct 2017 13:01:04 +0200

1994-2001: Studies of Civil Engineering (Bachelor and Master Degree) at the Technical University of Catalonia (UPC).

2001-2004: Project engineer at Pedelta S.L. Role as main project engineer in the design of bridges, footbridges and other special structures.

2004-2008: Doctoral studies in the Structural Analysis program of the Strength of Materials and Structural Engineering Department, of the UPC. These studies were conducted with a fellowship provided by the International Centre for Numerical Methods in Engineering (CIMNE).

2008: Dissertation of the PhD: “Micro-mechanical simulation of composite materials using the serial/parallel mixing theory” supervised by Dr. Sergio Oller.

2008-2009: Visiting scientist and Post-Doctoral Fellow at the Mechanical and Aerospace Engineering (MAE) department of the West Virginia University (WVU). The main task conducted in this period is the coordination of the “Resilient Tunnel Project” sponsored by Homeland Security (budget > $5,000,000)

2009-2014: Visiting professor at the Science and Nautical Engineering Department (DCEN) of the UPC. The teaching activity is conducted at the School of Nautical Studies (FNB) and at the School of Civil Engineering (ETSECCPB).

2012: Research stay at the MAE department of WVU

2013-17: Vice-dean Director of Studies at the FNB

2014: Contracted as Visiting lecturer at DCEN

2015: Board member of the Spanish Association of Composite Materials (AEMAC)

2017: Editor of the scientific journal Materiales Compuestos (Composite Materials) edited by AEMAC.

2018: Contracted as associate professor at DCEN

2019: Coordinator of the Master's program on Naval and Ocean Engineering

Currently working in three european projects related to composite materials: Fibre4Yards, Fibregy and Acasisas. In the former one acting as PI of the whole project.

Scientific production:

27 papers published in indexed journals (21 of them in Q1). 4 papers in non-indexed journals. 8 books and book chapters. More than 50 contributions to national and international conferences.

H-Index of 11, according to Scopus Database.

Research projects:

Participation in 1 research project in the United States, 9 European projects, 6 national (Spanish) projects, 1 project in collaboration between WVU and CIMNE and 6 projects for the industry.

Editor of 1 scientific journal and reviewer of 9 scientific journals. Co-Chair of two editions of the European Confernece on Multifunctional Structures (EMuS).