Scipedia: Francisco Zarate's colleagues

Carlos Agelet de Saracibar

Fri, 27 May 2016 10:33:23 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Eugenio Oñate

Wed, 25 May 2016 13:40:40 +0200

After completing a degree in Civil Engineering in July 1975 at the Technical Univ. of Valencia (Spain), he started postgraduate studies at the Civil Engineering Dept. of Swansea University, Wales, UK. There he completed in June 1976 a Master of Science degree (M.Sc. Thesis on Development of a finite strip method for analysis of bridges and folded plate structures) and later a Ph.D. degree (Dec. 1978) under the supervision of Prof. O. C. Zienkiewicz (Ph. D. Thesis on Plastic flow in metals with special reference to: I) Coupled thermal flow. II) Thin sheet metal forming). His Ph.D. studies were funded by an Alcoa Research Grant from USA.

In February 1979 he moved to the Technical University of Catalunya (UPC) in Barcelona, Spain, where he was hired as an Associated Professor on Structural Mechanics at the School of Civil Engineering. He became a Full Professor with tenure on June 1983. From March 1983 to March 1989 he was the Director of the School of Civil Engineering at UPC.

On March 1987 he founded CIMNE (International Center for Numerical Methods in Engineering, www.cimne.com), a research center specialized in the development and application of numerical methods in engineering. From March 1987 to June 2022 he was the Executive Vice-President and Director of CIMNE.

Has supervised 49 Ph.D. Thesis and 95 Master Thesis . 30 of his former students are now full professors in Universities in Spain (13), USA (4), UK (2) and Latin America (11). He has had a significant impact in the creation of new scientific groups in cooperation with his former students.

In 1989 he was the founder and first President of the Spanish Association for Numerical Methods in Engineering (SEMNI, www.cimne.upc.es/semni).

He was one of the founders and first Vice-President (1993-95) of the European Community on Computational Methods in Applied Sciences (ECCOMAS, www.eccomas.org)

His research activities have spread over a range of multidisciplinary fields which he has contributed relevant theories and methods of scientific and industrial relevance.

The above research lines have been developed in the framework of over 400 RTD projects carried out in cooperation with the main engineering companies in Spain and worldwide. Some 120 of these projects have been developed in the framework of EC programmes.

In parallel with the RTD activities, Eugenio Oñate has organized as chair person 45 international congresses on topics closely related with the above RTD lines. See list of congresses in www.cimne.com .

He has published 302 papers in scientific journals. He has written 4 text books and is the editor of 52 books in different topics of Computational Engineering Mechanics. He is the editor of three scientific journals (one of which is published by Springer) and 3 books series in Computational Mechanics. He is the author of 62 chapters in books, 40 monographs, 435 papers in conference proceedings and 230 research reports .

He has 4770 citations in the field of Computational Engineering Science. He has an h index of 42 and 19 papers with more than 50 citations.

He is regularly invited to deliver Keynote (Plenary) Lectures in the main International Conferences in Computational Engineering Science (25 Plenary Lectures and 30 Keynote lectures in the last 20 years).

His research work has been recognized in many Prizes and Awards.

Fernando Salazar

Fri, 27 May 2016 09:34:32 +0200

Fernando Salazar received the Degree on Civil Engineering from the Technical University of Madrid in 2002, specializing in Hydraulics. He has worked in several dam and hydraulic projects, as well as in the development of emergency plans and hazard-potential classification of dams (being Mequinenza and Riba-Roja, in the Ebro river, among them). He is working for CIMNE since 2009, where he is the current Project Development Director.

He obtained his PhD at the UPC in 2017, qualified as Excellent Cum Laude. It focused on the application of machine learning techniques to dam monitoring data analysis. In this field, he was winner of an International Challenge organized by Verbund, the greatest hydropower company in Austria.

He has been involved in several research projects in the fields of hydraulics, dam engineering and dam safety. He is author or co-author of 15 papers in scientific journals, and around 50 contributions in conference proceedings.

Francisco Javier Domínguez Mota

Thu, 28 Sep 2017 03:57:46 +0200

Main interests: numerical modeling of engineering problems, modeling of shallow waters and groundwater infiltration, numerical solution of differential equations, numerical analysis, optimization, software engineering.

Coordinator of tha Aula-CIMNE Morelia, at the Universidad Michoacana, México.

President of the Mexican Association of Numerical Modeling in Engineering.

International Center for Numerical Methods in Engineering

Tue, 10 May 2016 11:44:46 +0200

The International Center for Numerical Methods in Engineering (CIMNE) is a research organization created in 1987 at the heart of the prestigious Technical University of Catalonia (UPC) as a partnership between the Government of Catalonia and UPC, in cooperation with UNESCO. The aim of CIMNE is the development of numerical methods and computational techniques for advancing knowledge and technology in engineering and applied sciences.

CIMNE’s headquarters are located at the heart of the Technical University of Catalonia (UPC) in Barcelona. CIMNE has also premises at different buildings in several campus of the UPC. CIMNE has also offices in Spain (Madrid, Terrassa and Ibiza). In 2005 CIMNE started its international expansion and since then has created the following international branches: CIMNE Latinoamerica (Non-profit Foundation in Santa Fe, Argentina); CIMNE USA (Non-profit Corporation in Washington DC, USA); CIMNE Singapore (Non-profit Corporation in Singapore) and CIMNE Beijing (China).

CIMNE employs some 250 scientists and engineers who work in the different offices of CIMNE around the world. CIMNE has also established a network of 30 Classrooms in partnership with Universities in Spain and 11 Latin American countries.

The research and technology development (RTD) activities of CIMNE cover a wide spectrum of topics ranging from classical engineering fields such as civil, mechanic, environmental, naval, marine and offshore, food, telecommunication and bio-medical engineering, computer sciences and applied sciences such as material sciences bio-medicine, computational physics, nature, social and economic sciences and multimedia sciences, among others.

Over its history, CIMNE has taken part in over 2,000 RTD projects in cooperation with some 500 companies, universities and research centers worldwide.

Jordi Pons Prats

Thu, 30 Mar 2017 18:16:06 +0200

Dr. Jordi Pons-Prats is a Mechanical Engineer. His activity in the last 15 years has combined a research career in the field of optimization, robust design and stochastic analysis and the work experience in project management in the industrial sector. His research is focus on the development and application of optimization methods for Robust Design.

His industrial work experience is based in his technical background and his project management skills. He spent 3 years in the software industry, 3 years in the home appliances industry and 4 years in the aeronautical sector. He did his PhD as part-time student at CIMNE from 2003 to 2011. From 2008 he is the responsible of the aeronautical group of CIMNE, and a researcher in the Optimization and Artificial Intelligence field. He has published 9 scientific papers in JCR journals. He has 3 citations and a h-index of 1 (Source: Web of Knowledge).

He is the coordinator of the Iberia East Pilot Center of ERCOFTAC (www.ercoftac.org), and the Spanish National Contact Point of EASN (www.easn.net). He also collaborates with BAIE (Barcelona Aeronautica I Espai, www.baie.cat), the Catalan association of aeronautical industry

Jorge Hurtado

Wed, 07 Jun 2017 13:50:35 +0200

Julio García-Espinosa

Tue, 10 May 2016 11:43:04 +0200

MSc in Naval Architecture and Marine Engineering by the Technical University of Madrid (UPM) and PhD in Civil Engineering by the Technical University of Catalonia (UPC).

Currently, I am full professor of shipbuilding technology at the Higher Technical School of Naval Architects and Offshore Engineers (ETSIN) of the Technical University of Madrid and the Deputy Director of Institutional Relations.

I conduct my research in collaboration with the Model Basin Research Group at ETSIN (CEHINAV) and the International Center for Numerical Methods in Engineering (CIMNE). My research career has focused on developing computational models for fluid-structure interaction analysis and their application to the design and verification of ships, platforms, and marine structures.

I am the author of more than 35 articles published in first-tier international journals, have presented over 80 papers at international conferences, and have participated in more than 25 European or international research projects.

Additionally, I have been the promoter and co-founder of Compass IS, a company specializing in engineering design, and Scipedia, the developer of the platforms Scipedia.com and BIM TeamUp.

Miguel Angel Celigueta

Tue, 25 Apr 2017 12:44:06 +0200

I am right between Engineering and Software development.
Working at CIMNE since 2004, I have been involved and led research projects in a wide range of fields: harbours & waves, oil & gas drilling, aerodynamics, landslides, agriculture,... I developed a software for free surface flows (www.cimne.com/pfem/) and after that, one for particles (http://www.cimne.com/dem/), but I also found myself developing parts of standard CFD and structural (CSM) codes.
In these years I have become an experienced programmer mainly in Object Oriented languages (C++, Python) and also Matlab. Subversion or Git (preferably the second) are a must for the best team work.
As an Engineer, the goal of each project is my main concern, and software is just a handy tool.
The lectures on Theory of Finite Elements and structures given at the University since 2010 were a good complement to my practical work at CIMNE.

Pavel Ryzhakov

Wed, 05 Apr 2017 14:01:19 +0200

Ramon Ribó

Mon, 23 May 2016 21:56:01 +0200

I am the CEO of Compass Ingenieria y Sistemas, SA a technological company that develops and comercializes software for engineering simulation.

As a Civil Engineer pHD, I am interested in technological innovation, specially from a business point of view.
My personal objective is to understand how to add value from the I+D to the enterprise and create products that can enter into competition in the international technological market.

Specialties: My field of knowledge is about developing great software for Computer Simulation in Engineering including Structural Analysis, Mesh generation, CFD, etc.

Salvador Botello

Mon, 15 May 2017 21:06:58 +0200

Sergio Idelsohn

Fri, 27 May 2016 10:17:50 +0200

Xavier Oliver

Sun, 05 Jun 2016 09:30:58 +0200