Scipedia: Bhavinbhai Lakhani's friends

Alessandro Calvi

Fri, 19 May 2017 13:57:52 +0200

MScEng in Civil Engineering (110/110), Politecnico di Torino, 2010. Professional Program & Executive Education at Stanford University in 2014 (Energy Innovation and Emerging Technologies) and in 2025 (Reservoir Geomechanics and Unconventional Reservoir Geomechanics). Professional experience of 15 years, 130 activities (projects, studies, due diligences, FEM calculations, Direzione Lavori, analysis and inspections) in Italy and abroad since 2010.

Alex Barbat

Fri, 21 Jul 2017 14:29:19 +0200

Civil Engineer (1970) and Doctor in Engineering (1978) by the Technical University of Iasi, Romania; Ingeniero de Caminos Canales y Puertos (1986) and Doctor Ingeniero de Caminos Canales y Puertos (1989) by the Technical University of Catalonia (UPC-BarcelonaTech, Spain. Professor of Structural Mechanics and of Earthquake Engineering at the UPC. Professor Emeritus since 2017. Senior researcher at the International Centre of Numerical Methods in Engineering (CIMNE: www.cimne.com) Barcelona, Spain. Supervisor of 38 doctoral theses. Current research interests: seismic analysis and design of structures; evaluation of the seismic damage of structures; seismic vulnerability and risk evaluation; and active and passive control of structures. Publications: 8 books, 127 articles in journals indexed in the ISI Web of Knowledge or SCOPUS and 75 peer reviewed articles in other national and international journals. Collaboration in 15 projects in the framework of RTD programs of the European Commission, 11 of them as main researcher; in 22 projects funded by Spanish Ministries, 14 of them as main researcher. 25 consultancy contracts with Spanish and international companies or institutions like the World Bank, the Inter-American Development Bank or the United Nations Office for Disaster Risk Reduction, UNISDR. Co-editor of Revista Internacional de Ingeniería de Estructuras, Quito, Ecuador and of Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, Puerto Rico. Editor of the Monograph Series in Earthquake Engineering, CIMNE, http://www.cimne.com/tiendacimne/monotema.asp?id_tema=10 President of the Spanish Association of Earthquake Engineering, AEIS; head of the Risk Assessment Group, http://rag.cimne.com/, CIMNE Doctor Honoris Causa by the by the “Ovidius” University, Constantza, Romania, by the Technical University “Gh. Asachi” of Iasi, Romania and by the Technical University of Cluj-Napoca, Romania.

Aritz Esnaola

Wed, 17 May 2023 13:40:34 +0200

Dr. Aritz Esnaola holds a degree in Industrial Engineering (2011) and a PhD (2016) from Mondragon Unibertsitatea, where he currently works as a teaching and research professor.His research is focused on advanced manufacturing of structural products, research is focused on advanced manufacturing of structural products, especially for impact energy dissipation applications. Since September He is co-author of scientific articles related to 3D printing of metals, plastics and composites.He combines fundamental research projects at the European level with industrial transfer projects to industrial transfer projects to companies in sectors such as automotive or capital goods equipment.

Arturo Tena Colunga

Mon, 12 Jun 2017 19:43:39 +0200

Dr. Tena-Colunga obtained his BSc. in Civil Engineering at Universidad Nacional Autónoma de México (UNAM) and his MSc. and Ph.D. in Civil Engineering at the University of Illinois at Urbana-Champaign (UIUC). Currently, he is a Professor at Universidad Autónoma Metropolitana Azcapotzalco in Mexico City. He is Member of the Mexican Academy of Engineering since 2000 and member of the National System of Researchers of Mexico since 1993. He has published more than 300 scientific publications. He is a member of the Committee for the Seismic Design Regulations for Building Structures for the Manual of Civil Works, a model building code of Mexico and also in the Committee for Masonry Structures for Mexico´s Federal District Building Code.

Belén García de Pablos

Thu, 09 Jul 2020 12:48:02 +0200

Naval Architect with experience in management (15 years). Marketing and communications manager. Business Coach.

Bilingual in Spanish and English with a Masters degree in Information and Knowledge Society and an MBA. Specialised in on-off marketing and corporate communication: 78.5% page view increase in 2018 over 2017, 81% increase of social networks traffic to our site (first half of 2018 over the same period in 2017). Focused on the industrial, engineering and maritime sectors.

Benjamin Colucci

Wed, 21 Jun 2017 17:29:34 +0200

Currently I am the Director of the Transportation Technology Transfer Center (T²) and full professor in the Department of Civil Engineering and Surveying of the University of Puerto Rico at Mayagüez (UPRM) since 1978. I have a BSCE from UPRM, and a MSCE and a PhD in the transportation engineering area from Purdue University. I am a registered professional engineer in Puerto Rico and in Indiana. In December 2009, I finished the academic requirements to obtain a Juris Doctor, JD, from the Eugenio María de Hostos Law School in Mayagüez, Puerto Rico.

In the academic phase, I have taught undergraduate courses such as Highway Location and Curve Design, Highway Engineering, Structural Design of Pavements, Asphalt Mixtures, Pavement Management and Road Safety, among others.

I have presented the findings of several research projects in technical conferences in the United States, Central and South America, Spain, Portugal, South Korea, Saudi Arabia, and Indonesia and in technical committees of several international professional organizations of which I am a member.

I have received awards for my scientific contribution, achievement and productivity in the civil engineering and transportation of institutions such as Chi Epsilon, Sigma Xi, UPRM, CIAPR, Purdue University and UPR.

Bhavinbhai Lakhani

Tue, 26 Mar 2024 15:17:20 +0100

Borja Servan Camas

Wed, 25 May 2016 12:39:49 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Carlos Agelet de Saracibar

Fri, 27 May 2016 10:33:23 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Carlos Sandino

Mon, 16 May 2022 16:25:11 +0200

Postdoctoral researcher at Universidad de Sevilla. 'Margarita Salas' grants for the training of young doctors (Spanish Ministry of Universities. Funded by the Spanish Recovery, Transformation and Resilience Plan and Next Generation EU.

Group of Elasticity and Strength of Materials, Department of Continuum Mechanics and Theory of Structures, Universidad de Sevilla, Camino de los Descubrimientos s/n, 41092 Sevilla (España)

Carmem Miranda Lage

Thu, 27 Dec 2018 19:49:53 +0100

Possui graduação em Engenharia Civil pela Universidade Federal de Viçosa (2006) e mestrado em Engenharia Civil pela Universidade Federal de Ouro Preto (2008). Atualmente é professor Assistente do Curso de Engenharia Civil com Ênfase em Estruturas Metálicas da Universidade Federal de São João del-Rei - Campus Alto Paraopeba - Ouro Branco. Atuou como engenheira de projetos de equipamentos/estruturas-Usiminas Mecânica e professora do curso de Engenharia Civil-Unipac. Tem experiência na áreas de engenharia Mecânica e Civil, com ênfase em Estruturas Metálicas.

Chengjuan Ren

Thu, 29 Jun 2023 03:31:44 +0200

Chengjuan Ren is a professor at the College of language intelligence, Sichuan International Studies University, Chongqing, China. She received a Ph.D. in software convergence engineering from Kunsan National University, Gunsan, Korea in 2022 and a master degree in computer software and theory from Chongqing University, Chongqing, China in 2010. Her research interests include machine learning, deep learning.

D. C. Gámez-García

Sun, 21 May 2023 23:05:00 +0200

Diana Carolina Gámez-García es Doctora por la Universidad Politécnica de Cataluña del programa Tecnología de la arquitectura, de la edificación y del urbanismo; es miembro SNI 1 del sistema nacional de investigadores. Actualmente labora en la Universidad de Monterrey como Profesora e investigadora del Departamento de Ing. Civil y Gestión. Cuenta con más de 10 artículos científicos, la mayoría de ellos en revistas indexadas a JCR, como "Building and Environment", "Sustainable Cities and Society", "Energies", y "Sustainability". Es revisora de artículos científicos en la revista Journal of Cleaner Production. Ha participado en múltiples congresos nacionales e internacionales y ha dirigido tesis de maestría y licenciatura. Su investigación se centra en temas como análisis del ciclo de vida de materiales para edificación y urbanismo; sustentabilidad en la construcción; análisis de la vivienda social mexicana; y propiedades físico-mecánicas del concreto reciclado. Ha hecho divulgación científica en programas académicos en diferentes niveles educativos.

David J. Vicente

Fri, 27 May 2016 11:16:53 +0200

David J. Vicente received the Bachelor's Degree, and subsequently the Master's Degree, in Civil Engineering from the Technical University of Madrid in 2009 and 2011, respectively, both specialising in Hydraulics. In 2017 he presented his thesis 'Design of pressure management operations in water distribution districts and analysis of their impact' with 'Excellent Cum Laude' qualification.

He has worked on multiple research projects, being his fields of expertise the application of numerical modelling and Machine Learning-based models to different areas of Hydraulic and Environmental Engineering: “Water Distribution Systems: modelling, pressure management and leakage management”, “Dam Engineering: geometric design, thermo-mechanical modelling”, “Prediction of water quality parameters and optimization of advanced treatments” and “Air quality forecasting”.

He is currently working for CIMNE (since October 2015), in the department of “Machine Learning in Civil Engineering” where he is involved in research, technical development (programming) and proposal development at national and European level. He is author or co-author of 9 articles in scientific journals and a book chapter as well as 25 contributions to conference proceedings. He is the creator of the 'AULA ETSI UPM-CIMNE', through which he collaborates with UPM in research and development of R+D+i projects, direction of Master's Thesis and Doctoral Thesis and teaching of classes

Emer T. Quezon

Wed, 06 Jan 2021 15:22:07 +0100

To date, I have published at least 190 research papers in various renowned worldwide journals & repositories, including three co-authored books that can be seen on Google Scholar. I also advised numerous MSc & Ph.D. students for their research studies and have been invited to examine Theses' and dissertations' final presentations & defense at various universities in Ethiopia, Eastern Africa, University of Rostock, Rostock, Germany, and the Philippines. I have been in academia for over 20 years, teaching courses in the Master's programs of Civil Engineering (Construction Engineering and Management, Highway Engineering, Transportation Engineering, and Road and Transport Engineering) in Ethiopia, Eastern Africa, and the Philippines. In addition, my 22 years of experience at the Department of Public Works and Highways, Region 02, Cagayan Valley Region, Philippines, have enhanced my knowledge and made me confident in presenting the actual situation during my class lectures and research work.

Eugenio J. Muttio

Thu, 09 Nov 2017 05:25:52 +0100

EDUCATION

UNIVERSITAT POLITÈCNICA DE CATALUNYA

MSc. in Computational Mechanics Student

UNIVERSITY OF GUANAJUATO

Civil Engineering
Thesis: “Analysis, Design and Optimiza on of Parametric Structures” - CUM LAUDE | 2011- 2016

PUBLICATIONS

BOOKS

Botello, S. , Muttio, E. , Salazar, J.: “Sta c and Dynamic Structural Analysis. Trusses, Beams and Frames”. [“Análisis Estructural Estático y Dinámico. Armaduras, Vigas y Marcos”]. University of Guanajuato. ISBN: 978-607-441-482-0. Guanajuato, Mexico. September (2017)

PAPERS FOR CONGRESSES

Muttio, E. , Botello, S. , Tapia, M.: “Parametric Modelling Using Visual Programming with Application in the Design and Analysis of Buildings”. Paper presented at the CIMN: 7th International Congress of Numercial Methods. Guadalajara, Jalisco, México. (2017) URL: h ps://www.scipedia.com/public/Mu o_et_al_2017a
Muttio, E. , Botello, S. , Tapia, M.: “Geometric Parameteriza on with Applica on in the Design and Analysis of Building Structures”. Paper presented at the ISUM: 8th International Supercompu ng Conference in Mexico. Guadalajara, Jalisco, México. February (2017)
Muttio, E. , Botello, S. , Tapia, M.: “Parametric Structural Design of Buildings”. Paper presented at the Structural Engineering National Congress SMIE. Mérida, Yucatán, Mexico. November (2016)
Muttio, E. , Botello, S. , Tapia, M.: “Reticulated Structura on Analysis for Buildings”. Paper presented at the UG Research Summer. Guanajuato, Guanajuato, Mexico. July (2015)

Professional Experience

ICEC - Civil Engineering Consulting Firm Structural Engineer | August 2017- Present

AULA CIMNE UG
Research Projects Coordinator and Collaborator | September 2013 - 2017

UNIVERSITY OF GUANAJUATO

Mechanics of Materials Adjunct Lecturer
“2nd, 3rd and 4th Summer of Computa onal Tools Aula CIMNE
UG” Trainer and Coordinator Structural Analysis and
Programming Advisor VBA Programming Workshops Trainer

INTERNSHIPS

UNIVERSITAT POLITÈCNICA DE CATALUNYA

FEM-DEM FRACTURE SIMULATIONS | FEB 2018 - PRESENT

MATHEMATICAL RESEARCH CENTER -

CIMAT Research Summer | Summer 2014

RESEARCH INTERESTS

Computational Mechanics
Computational Damage and Plasticity
Numerical Analysis
Parametric Design and Modellng
Material and Structures Mechanics
Structural Analysis / Design
Seismic Engineering
Optimization

Eugenio Oñate

Wed, 25 May 2016 13:40:40 +0200

After completing a degree in Civil Engineering in July 1975 at the Technical Univ. of Valencia (Spain), he started postgraduate studies at the Civil Engineering Dept. of Swansea University, Wales, UK. There he completed in June 1976 a Master of Science degree (M.Sc. Thesis on Development of a finite strip method for analysis of bridges and folded plate structures) and later a Ph.D. degree (Dec. 1978) under the supervision of Prof. O. C. Zienkiewicz (Ph. D. Thesis on Plastic flow in metals with special reference to: I) Coupled thermal flow. II) Thin sheet metal forming). His Ph.D. studies were funded by an Alcoa Research Grant from USA.

In February 1979 he moved to the Technical University of Catalunya (UPC) in Barcelona, Spain, where he was hired as an Associated Professor on Structural Mechanics at the School of Civil Engineering. He became a Full Professor with tenure on June 1983. From March 1983 to March 1989 he was the Director of the School of Civil Engineering at UPC.

On March 1987 he founded CIMNE (International Center for Numerical Methods in Engineering, www.cimne.com), a research center specialized in the development and application of numerical methods in engineering. From March 1987 to June 2022 he was the Executive Vice-President and Director of CIMNE.

Has supervised 49 Ph.D. Thesis and 95 Master Thesis . 30 of his former students are now full professors in Universities in Spain (13), USA (4), UK (2) and Latin America (11). He has had a significant impact in the creation of new scientific groups in cooperation with his former students.

In 1989 he was the founder and first President of the Spanish Association for Numerical Methods in Engineering (SEMNI, www.cimne.upc.es/semni).

He was one of the founders and first Vice-President (1993-95) of the European Community on Computational Methods in Applied Sciences (ECCOMAS, www.eccomas.org)

His research activities have spread over a range of multidisciplinary fields which he has contributed relevant theories and methods of scientific and industrial relevance.

The above research lines have been developed in the framework of over 400 RTD projects carried out in cooperation with the main engineering companies in Spain and worldwide. Some 120 of these projects have been developed in the framework of EC programmes.

In parallel with the RTD activities, Eugenio Oñate has organized as chair person 45 international congresses on topics closely related with the above RTD lines. See list of congresses in www.cimne.com .

He has published 302 papers in scientific journals. He has written 4 text books and is the editor of 52 books in different topics of Computational Engineering Mechanics. He is the editor of three scientific journals (one of which is published by Springer) and 3 books series in Computational Mechanics. He is the author of 62 chapters in books, 40 monographs, 435 papers in conference proceedings and 230 research reports .

He has 4770 citations in the field of Computational Engineering Science. He has an h index of 42 and 19 papers with more than 50 citations.

He is regularly invited to deliver Keynote (Plenary) Lectures in the main International Conferences in Computational Engineering Science (25 Plenary Lectures and 30 Keynote lectures in the last 20 years).

His research work has been recognized in many Prizes and Awards.

FACUNDO ALONSO

Mon, 12 Jun 2017 23:46:30 +0200

Surface hydrology, rainfall-runoff modeling, flood forecasting and control, identification and stochastic parameter estimation, watershed management, global optimization, genetic algorithms.

Felix Santiago-Collazo

Sun, 18 Jun 2017 02:20:18 +0200

Interested on hydrologic and hydraulic modeling

Fermin Otero

Mon, 26 Apr 2021 12:12:28 +0200

Fernando Salazar

Fri, 27 May 2016 09:34:32 +0200

Fernando Salazar received the Degree on Civil Engineering from the Technical University of Madrid in 2002, specializing in Hydraulics. He has worked in several dam and hydraulic projects, as well as in the development of emergency plans and hazard-potential classification of dams (being Mequinenza and Riba-Roja, in the Ebro river, among them). He is working for CIMNE since 2009, where he is the current Project Development Director.

He obtained his PhD at the UPC in 2017, qualified as Excellent Cum Laude. It focused on the application of machine learning techniques to dam monitoring data analysis. In this field, he was winner of an International Challenge organized by Verbund, the greatest hydropower company in Austria.

He has been involved in several research projects in the fields of hydraulics, dam engineering and dam safety. He is author or co-author of 15 papers in scientific journals, and around 50 contributions in conference proceedings.

Francisco Javier Domínguez Mota

Thu, 28 Sep 2017 03:57:46 +0200

Main interests: numerical modeling of engineering problems, modeling of shallow waters and groundwater infiltration, numerical solution of differential equations, numerical analysis, optimization, software engineering.

Coordinator of tha Aula-CIMNE Morelia, at the Universidad Michoacana, México.

President of the Mexican Association of Numerical Modeling in Engineering.

Francisco Zarate

Wed, 03 May 2017 14:14:40 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Gerardo Tinoco-Guerrero

Sat, 08 Dec 2018 07:27:21 +0100

I have a degree in Physical and Mathematical Sciences, a master’s degree in physical engineering sciences, and a Ph.D. in physical engineering sciences for the Universidad Michoacana de San Nicolás de Hidalgo. Currently I’m part of the board of directors of the “Sociedad Mexicana de Computación Científica y sus Aplicaciones” (Mexican Society of Scientific Computing and its Applications) and the Editor in Chief of the “Boletín de la Sociedad Mexicana de Computación Científica y sus Aplicaciones” (Journal of the Mexican Society of Scientific Computing and its Applications).

I look for important responsibilities with a high impact on the development of society. I’m an excellent academic and, because of this, I’m interested in the transmission of knowledge.

My main research fields involve the design and application of Numerical Methods to perform simulations of many different physical phenomena, which can lead to solutions to real-life problems.

Helena Teixeira

Fri, 19 May 2023 14:52:19 +0200

I have a MSc in Chemical Engineering from Faculty of Engineering of University of Porto and I am currently working as a researcher at INEGI. I am a determined person with team spirit, and critical thinking. I easily adapt to new realities, even if they put me out of my comfort zone.

International Center for Numerical Methods in Engineering

Tue, 10 May 2016 11:44:46 +0200

The International Center for Numerical Methods in Engineering (CIMNE) is a research organization created in 1987 at the heart of the prestigious Technical University of Catalonia (UPC) as a partnership between the Government of Catalonia and UPC, in cooperation with UNESCO. The aim of CIMNE is the development of numerical methods and computational techniques for advancing knowledge and technology in engineering and applied sciences.

CIMNE’s headquarters are located at the heart of the Technical University of Catalonia (UPC) in Barcelona. CIMNE has also premises at different buildings in several campus of the UPC. CIMNE has also offices in Spain (Madrid, Terrassa and Ibiza). In 2005 CIMNE started its international expansion and since then has created the following international branches: CIMNE Latinoamerica (Non-profit Foundation in Santa Fe, Argentina); CIMNE USA (Non-profit Corporation in Washington DC, USA); CIMNE Singapore (Non-profit Corporation in Singapore) and CIMNE Beijing (China).

CIMNE employs some 250 scientists and engineers who work in the different offices of CIMNE around the world. CIMNE has also established a network of 30 Classrooms in partnership with Universities in Spain and 11 Latin American countries.

The research and technology development (RTD) activities of CIMNE cover a wide spectrum of topics ranging from classical engineering fields such as civil, mechanic, environmental, naval, marine and offshore, food, telecommunication and bio-medical engineering, computer sciences and applied sciences such as material sciences bio-medicine, computational physics, nature, social and economic sciences and multimedia sciences, among others.

Over its history, CIMNE has taken part in over 2,000 RTD projects in cooperation with some 500 companies, universities and research centers worldwide.

Iolanda Craifaleanu

Mon, 15 May 2017 13:43:02 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Javier Mora

Thu, 26 May 2016 21:02:22 +0200

PhD in Electronic Engineering by the Polytechnic University of Catalonia (UPC): Magnetic Levitation Forces Phenomenology in High Critical Temperature Superconductors (1998, Cum Laude), developed at the Institute of Materials Sciencie of Barcelona (ICMAB) of the Spanish Research Council (CSIC). Supervisor: Prof. Xavier Obradors. Telecommunication Engineer (UPC). Master's thesis: Non-Lineal Characterisation of MESFET Transistors (1992).

Project manager and researcher on electromagnetics in CIMNE (1998 - present)
Development of finite element based electromagnetic simulation tools. Participation in more than 20 European and national projects (seven of them as principal investigator). Ramón y Cajal researcher. Research lines in computational electromagnetics, magnetic sensors and superconductivity. Projects: Brite-Euram, V, VI and VII FM, QoL, IST, MIDAS, CICYT, Generalitat de Cataluña, ATYCA...) 16 international papers (J.Appl.Phys., IEEE Trans.on Appl.Sc, APL). Conferences (EUCAS, ASC, MAGLEV).

Technology transfer through CIMNE Tecnología S.A. (2012 - present)

Assistant Professor at Technical University of Catalonia (UPC), 2004 – 2009. Introduction to Computers, Programming Lab, Introduction to Telecommunication Engineering, RF Laboratory
Contribution to the plan for an implementation of transversal competencies within the EEES, EPSC, 2004-2007.

Jesus Miguel Bairan

Mon, 09 Oct 2017 15:43:43 +0200

Jesús Sánchez Pinedo

Mon, 24 Aug 2020 09:22:22 +0200

Jianxue Feng

Fri, 05 May 2023 11:30:14 +0200

I graduated with a PhD in Geotechnical Engineering from Guangxi University in 2019 and have been working at Guizhou University for Nationalities since August 2019. In recent years, I have mainly engaged in research on major infrastructure design and safety assessment in the field of geotechnical engineering, and have achieved a series of achievements in soil structure interaction, foundation consolidation theory, and foundation engineering.

Joaquín Irazábal González

Mon, 27 Jun 2016 13:36:07 +0200

My professional career is being developed mainly in the field of calculation of structures using numerical methods.

Since November 2011 I work in the International Centre for Numerical Methods in Engineering (CIMNE) in Madrid developing research projects in Civil Engineering. The projects focus on the possibilities of using particle methods for the calculation of the behaviour of granular materials, specifically, the Particle Finite Element Method (PFEM) and the Discrete Element Method (DEM).

During my years at the CIMNE I studied the Master of Numerical Methods in Engineering at the Polytechnic University of Catalonia (UPC) and my PhD thesis entitled "Numerical analysis of railway ballast behaviour using the Discrete Element Method", presented on October 6, 2017, also at the UPC. The thesis, awarded the XVI Talgo Prize for Technological Innovation, was focused on the application of the Discrete Elements Method to the calculation of the behaviour of railway ballast.

Jonathan Colom Cobb

Wed, 22 Feb 2017 11:07:31 +0100

Jonathan Colom Cobb recently finished his degree in Marine Engineernig and Naval Architecture (2015) at the Technical University of Madrid (UPM). At the present time, he is a research Engineer at CIMNE and is starting his PhD.

During his degree, Jonathan already showed interest in numerical methods and computational science by first working as a scholar at CEHINAV (Canal de Ensayos Hidrodinamicos de la Escuela Técnica Superior de Ingenieros Navales, Madrid) and then starting an internship at CIMNE that lasted over a year. Now that he has finished his degree, he is starting his PhD under the supervision of Dr. Julio García Espinosa at CIMNE.

Jordi Pons Prats

Thu, 30 Mar 2017 18:16:06 +0200

Dr. Jordi Pons-Prats is a Mechanical Engineer. His activity in the last 15 years has combined a research career in the field of optimization, robust design and stochastic analysis and the work experience in project management in the industrial sector. His research is focus on the development and application of optimization methods for Robust Design.

His industrial work experience is based in his technical background and his project management skills. He spent 3 years in the software industry, 3 years in the home appliances industry and 4 years in the aeronautical sector. He did his PhD as part-time student at CIMNE from 2003 to 2011. From 2008 he is the responsible of the aeronautical group of CIMNE, and a researcher in the Optimization and Artificial Intelligence field. He has published 9 scientific papers in JCR journals. He has 3 citations and a h-index of 1 (Source: Web of Knowledge).

He is the coordinator of the Iberia East Pilot Center of ERCOFTAC (www.ercoftac.org), and the Spanish National Contact Point of EASN (www.easn.net). He also collaborates with BAIE (Barcelona Aeronautica I Espai, www.baie.cat), the Catalan association of aeronautical industry

José Gerardo Tinoco-Ruiz

Fri, 14 Feb 2020 18:51:01 +0100

My work is mainly in the areas of Non-linear Optimization, Grid Generation and Numerical Solution of PDE's.

Juan Camilo Molina-Villegas

Mon, 30 Dec 2019 16:25:00 +0100

Juan Carlos Ruge C.

Mon, 09 Oct 2017 17:11:39 +0200

Researcher in Geotechnics

Julio García-Espinosa

Tue, 10 May 2016 11:43:04 +0200

MSc in Naval Architecture and Marine Engineering by the Technical University of Madrid (UPM) and PhD in Civil Engineering by the Technical University of Catalonia (UPC).

Currently, I am full professor of shipbuilding technology at the Higher Technical School of Naval Architects and Offshore Engineers (ETSIN) of the Technical University of Madrid and the Deputy Director of Institutional Relations.

I conduct my research in collaboration with the Model Basin Research Group at ETSIN (CEHINAV) and the International Center for Numerical Methods in Engineering (CIMNE). My research career has focused on developing computational models for fluid-structure interaction analysis and their application to the design and verification of ships, platforms, and marine structures.

I am the author of more than 35 articles published in first-tier international journals, have presented over 80 papers at international conferences, and have participated in more than 25 European or international research projects.

Additionally, I have been the promoter and co-founder of Compass IS, a company specializing in engineering design, and Scipedia, the developer of the platforms Scipedia.com and BIM TeamUp.

LEILSON JOAQUIM ARAUJO

Tue, 18 Sep 2018 21:00:43 +0200

Civil engineer, founding member of the Civil Engineering Academic Center (CAEC-IFG / FORMOSA). Both are linked to the Federal Institute of Education, Science and Technology of Goiás, Campus Formosa. Researcher in the area of numerical modeling of structures, with emphasis on concrete dams by gravity. He has knowledge and experience in the area of works supervision

Leticia del Valle Vicario

Mon, 12 Jun 2017 17:53:01 +0200

PhD. MSc. Prof.

Áreas de conocimiento en interés (Knowledge and interest):

Ingeniería Civil (Civil Engineering)

Recursos Hídricos (Water resources)

Hidrología (Hydrology)

Fenómenos hidrológicos extremos (Extreme hydrological phenomena)

Luis Godoy

Thu, 04 May 2017 14:45:52 +0200

I completed my Ph.D. at University College London, in England, in 1979, and worked at the University of Cordoba in Argentina, CONICET in Argentina, West Virginia University in Morgantown, WV, USA, and University of Puerto Rico, Mayaguez, Puerto Rico.

My areas of research interest are analysis and behavior of thin walled structures, with current emphasis on oil storage tanks; computational material science, with emphasis on multiscale analysis of composites and metal alloys; and history of Mechanics.

Luis Rubio

Tue, 16 May 2023 11:54:19 +0200

Aeronautical Engineer, Composite Manufacturing Development and Technology Engineer, Teaching at Cadiz University.

Manuel Gómez Valentín

Sat, 07 Oct 2017 12:39:32 +0200

Full professor in Hydraulic Enginering (School of Civil Engineering of Barcelona) Cordinator of academic modules on Water Enginering Coordinator of Erasmus Mundus Master in Hydroinformatics and Water Management, Master EuroAquae from 2004. Master constituted by a consortia of 5 european universities: University of Nice - Sophia Antipolis (coordinator), Newcastle University, Technical University of Brandengurg Cottbus - Senftenberg, University of Varsaw and UPC. Former editor in chief of the technical Journal in spanish "Ingeniería del Agua" (Water engineering)

María Jesús Samper

Mon, 27 Jun 2016 12:33:57 +0200

Please, write a brief description of your experience in research, teaching and/or education.

María Jesús Samper - RIMNI

Fri, 14 Oct 2016 11:26:46 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Materiales Compuestos

Thu, 10 Mar 2022 10:34:50 +0100

Materiales Compuestos es la revista editada por la Asociación Española de Materiales Compuestos (AEMAC). Ésta empieza su andadura en el año 2017, con la voluntad de ser un punto de encuentro entre investigadores, desarrolladores, técnicos, ingenieros, científicos y, en definitiva, toda la comunidad de profesionales que desarrolla su actividad en el mundo de los materiales compuestos.

El principal objetivo de la revista es la difusión y divulgación de los avances científicos y tecnológicos, en el campo de los materiales compuestos, que puedan ser de interés para AEMAC y para todos aquellos profesionales a los que se dirige la revista. En este sentido, serán de especial interés aquellos trabajos desarrollados en España, Portugal y América Latina, así como los trabajos de cualquier otra procedencia que puedan ser relevantes para su difusión en el foro de la revista.

Mattia Mazzeschi

Sat, 20 May 2023 23:52:58 +0200

Structural Health Monitoring, Non-destructive Testing, Thermoplastic composites.

Mayara Amario

Sun, 28 Mar 2021 16:45:51 +0200

Melba Navarro

Wed, 20 Sep 2017 09:49:04 +0200

Experienced researcher in the biomaterials field, in particular in the development of new 3D structures for tissue engineering. More than 16 years of experience participating in the design, development and management of innovation projects both, at national an international level. Experience working in multicultural and multidisciplinary environments, in R&D centers in 6 different countries. Currently focused on science to market, technology transfer processes at CIMNE Tecnología.

Miguel Angel Celigueta

Tue, 25 Apr 2017 12:44:06 +0200

I am right between Engineering and Software development.
Working at CIMNE since 2004, I have been involved and led research projects in a wide range of fields: harbours & waves, oil & gas drilling, aerodynamics, landslides, agriculture,... I developed a software for free surface flows (www.cimne.com/pfem/) and after that, one for particles (http://www.cimne.com/dem/), but I also found myself developing parts of standard CFD and structural (CSM) codes.
In these years I have become an experienced programmer mainly in Object Oriented languages (C++, Python) and also Matlab. Subversion or Git (preferably the second) are a must for the best team work.
As an Engineer, the goal of each project is my main concern, and software is just a handy tool.
The lectures on Theory of Finite Elements and structures given at the University since 2010 were a good complement to my practical work at CIMNE.

Miguel Cervera

Wed, 28 Feb 2018 08:46:44 +0100

Prof. Miguel Cervera is Ingeniero de Caminos, Canales y Puertos (UPC, 1983), Doctor of Philosophy in Civil Engineering (University of Wales, 1986), Dr. Ingeniero de Caminos, Canales y Puertos (UPC, 1988). He was Associate Professor of Continuum Mechanics and Structural Analysis (1988-1999) and is Professor of Continuum Mechanics and Structural Analysis (since 1999) at the Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos of Barcelona (UPC). He has been Deputy Director for Infrastructures and Resources (1990-1991), Head of Studies for Civil Engineering (1991-1994), Deputy Director for Academic Coordination (1994-1996), Academic Registrar (1996-1997) and Head of Doctoral Studies (2016- ) at the Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos of Barcelona. In 1988 he was one of the founder members of the Spanish Society for Numerical Methods in Engineering (SEMNI) and he has been a member of the Executive Committee of SEMNI since 1996.

In 1998 Prof. Miguel Cervera was co-winner of the Honorable Mention for the Award "City of Barcelona on Technological Research". In 2012 he won the UPC Board of Trustees Award for Quality Career in University Teaching. Also in 2012, he was awarded the "Jaume Vicens Vives" Medal for Excellence in University Teaching by the Government of Catalonia. In 2016 he received the "IACM Fellows Award", bestowed by the International Association for Computational Mechanics for a distinguished record of research, accomplishment and publication in areas of Computational Mechanics.

Prof. Miguel Cervera has published 13 books in Mechanics and Strength of Materials and in Structural Mechanics, used as reference textbooks in graduate and post-graduate courses in Engineering and Architecture in universities in Spain, Argentina, Peru, Guatemala and Portugal.

Prof. Miguel Cervera has published 100 research papers in JCR scientific journals, over 180 communications in International Conferences, Congresses and Symposiums and 24 monographs and 9 book chapters in the field of non-linear computational mechanics of solids, with focus on finite element technology, non-linear constitutive modeling, and thermo-mechanical and coupled problems and numerical simulation of construction and production processes.

Prof. Miguel Cervera has participated in 70 national and international research conferences, acting in 47 of them as member of the Scientific or the Organizing Committee. He has also co-organized a number of special invited sessions and has been invited as keynote lecturer in several international conferences, including the IV World Congress on Computational Mechanics (1998). He also acts regularly as referee for 37 international scientific journals and has been co-editor of a special issue of the International Journal of Plasticity on Numerical Simulation of Forming Processes (2001). He is member of the Editorial Board of the "Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería", "Advances in Industrial Engineering and Management", “Metals” and “Frontiers in Built Environment (Computational Methods in Structural Engineering)”.

Prof. Miguel Cervera has participated in numerous financed research projects, most of them related to the application of Finite Elements Methods to the development of tools for Computer Aided Engineering, with focus on the industrial applications of thermo-mechanical processes with phase change and chemical interactions. These include different techniques for Casting, Welding, Metal Deposition and Additive Manufacturing.

Milan Toma

Wed, 13 Jul 2022 17:21:42 +0200

The author of "AI-Assisted Medical Diagnostics: A Clinical Guide to Next-Generation Diagnostics," a practical guide for clinicians; teaching you how to spot trustworthy AI/ML tools vs. hype in medical diagnostics. Learn to evaluate, integrate, and question AI solutions for safer, smarter patient care.

Nathalia Silva

Thu, 04 Nov 2021 10:41:49 +0100

Ramon Ribó

Mon, 23 May 2016 21:56:01 +0200

I am the CEO of Compass Ingenieria y Sistemas, SA a technological company that develops and comercializes software for engineering simulation.

As a Civil Engineer pHD, I am interested in technological innovation, specially from a business point of view.
My personal objective is to understand how to add value from the I+D to the enterprise and create products that can enter into competition in the international technological market.

Specialties: My field of knowledge is about developing great software for Computer Simulation in Engineering including Structural Analysis, Mesh generation, CFD, etc.

Roger McIntyre

Thu, 14 Mar 2024 03:02:04 +0100

Sergio Idelsohn

Fri, 27 May 2016 10:17:50 +0200

Sergio Oller

Fri, 15 Jan 2021 14:16:36 +0100

Research fields:

New Structural Materials, Industrial Casting Processes, Parallel Computing,

Constitutive Models, Composites Materials, Fatigue, Earthquake Engineering and

Dynamic of Structures.

Tom Findley

Wed, 09 Aug 2017 23:56:41 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Xavier Martinez

Mon, 09 Oct 2017 13:01:04 +0200

1994-2001: Studies of Civil Engineering (Bachelor and Master Degree) at the Technical University of Catalonia (UPC).

2001-2004: Project engineer at Pedelta S.L. Role as main project engineer in the design of bridges, footbridges and other special structures.

2004-2008: Doctoral studies in the Structural Analysis program of the Strength of Materials and Structural Engineering Department, of the UPC. These studies were conducted with a fellowship provided by the International Centre for Numerical Methods in Engineering (CIMNE).

2008: Dissertation of the PhD: “Micro-mechanical simulation of composite materials using the serial/parallel mixing theory” supervised by Dr. Sergio Oller.

2008-2009: Visiting scientist and Post-Doctoral Fellow at the Mechanical and Aerospace Engineering (MAE) department of the West Virginia University (WVU). The main task conducted in this period is the coordination of the “Resilient Tunnel Project” sponsored by Homeland Security (budget > $5,000,000)

2009-2014: Visiting professor at the Science and Nautical Engineering Department (DCEN) of the UPC. The teaching activity is conducted at the School of Nautical Studies (FNB) and at the School of Civil Engineering (ETSECCPB).

2012: Research stay at the MAE department of WVU

2013-17: Vice-dean Director of Studies at the FNB

2014: Contracted as Visiting lecturer at DCEN

2015: Board member of the Spanish Association of Composite Materials (AEMAC)

2017: Editor of the scientific journal Materiales Compuestos (Composite Materials) edited by AEMAC.

2018: Contracted as associate professor at DCEN

2019: Coordinator of the Master's program on Naval and Ocean Engineering

Currently working in three european projects related to composite materials: Fibre4Yards, Fibregy and Acasisas. In the former one acting as PI of the whole project.

Scientific production:

27 papers published in indexed journals (21 of them in Q1). 4 papers in non-indexed journals. 8 books and book chapters. More than 50 contributions to national and international conferences.

H-Index of 11, according to Scopus Database.

Research projects:

Participation in 1 research project in the United States, 9 European projects, 6 national (Spanish) projects, 1 project in collaboration between WVU and CIMNE and 6 projects for the industry.

Editor of 1 scientific journal and reviewer of 9 scientific journals. Co-Chair of two editions of the European Confernece on Multifunctional Structures (EMuS).

Yingge Ni

Thu, 28 May 2020 13:51:06 +0200

morphing wing;

aeroelasticity