Scipedia: Emer T. Quezon's friends

Abdin Huluka

Tue, 18 May 2021 12:42:02 +0200

Alemayehu Feyissa Gerba

Tue, 11 May 2021 09:10:43 +0200

Alex Barbat

Fri, 21 Jul 2017 14:29:19 +0200

Civil Engineer (1970) and Doctor in Engineering (1978) by the Technical University of Iasi, Romania; Ingeniero de Caminos Canales y Puertos (1986) and Doctor Ingeniero de Caminos Canales y Puertos (1989) by the Technical University of Catalonia (UPC-BarcelonaTech, Spain. Professor of Structural Mechanics and of Earthquake Engineering at the UPC. Professor Emeritus since 2017. Senior researcher at the International Centre of Numerical Methods in Engineering (CIMNE: www.cimne.com) Barcelona, Spain. Supervisor of 38 doctoral theses. Current research interests: seismic analysis and design of structures; evaluation of the seismic damage of structures; seismic vulnerability and risk evaluation; and active and passive control of structures. Publications: 8 books, 127 articles in journals indexed in the ISI Web of Knowledge or SCOPUS and 75 peer reviewed articles in other national and international journals. Collaboration in 15 projects in the framework of RTD programs of the European Commission, 11 of them as main researcher; in 22 projects funded by Spanish Ministries, 14 of them as main researcher. 25 consultancy contracts with Spanish and international companies or institutions like the World Bank, the Inter-American Development Bank or the United Nations Office for Disaster Risk Reduction, UNISDR. Co-editor of Revista Internacional de Ingeniería de Estructuras, Quito, Ecuador and of Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, Puerto Rico. Editor of the Monograph Series in Earthquake Engineering, CIMNE, http://www.cimne.com/tiendacimne/monotema.asp?id_tema=10 President of the Spanish Association of Earthquake Engineering, AEIS; head of the Risk Assessment Group, http://rag.cimne.com/, CIMNE Doctor Honoris Causa by the by the “Ovidius” University, Constantza, Romania, by the Technical University “Gh. Asachi” of Iasi, Romania and by the Technical University of Cluj-Napoca, Romania.

Arc Raniel Viernes

Sun, 06 Jul 2025 15:41:55 +0200

ARTHUR IBANEZ

Fri, 14 May 2021 07:52:26 +0200

Arturo Tena Colunga

Mon, 12 Jun 2017 19:43:39 +0200

Dr. Tena-Colunga obtained his BSc. in Civil Engineering at Universidad Nacional Autónoma de México (UNAM) and his MSc. and Ph.D. in Civil Engineering at the University of Illinois at Urbana-Champaign (UIUC). Currently, he is a Professor at Universidad Autónoma Metropolitana Azcapotzalco in Mexico City. He is Member of the Mexican Academy of Engineering since 2000 and member of the National System of Researchers of Mexico since 1993. He has published more than 300 scientific publications. He is a member of the Committee for the Seismic Design Regulations for Building Structures for the Manual of Civil Works, a model building code of Mexico and also in the Committee for Masonry Structures for Mexico´s Federal District Building Code.

Belén García de Pablos

Thu, 09 Jul 2020 12:48:02 +0200

Naval Architect with experience in management (15 years). Marketing and communications manager. Business Coach.

Bilingual in Spanish and English with a Masters degree in Information and Knowledge Society and an MBA. Specialised in on-off marketing and corporate communication: 78.5% page view increase in 2018 over 2017, 81% increase of social networks traffic to our site (first half of 2018 over the same period in 2017). Focused on the industrial, engineering and maritime sectors.

Benjamin Colucci

Wed, 21 Jun 2017 17:29:34 +0200

Currently I am the Director of the Transportation Technology Transfer Center (T²) and full professor in the Department of Civil Engineering and Surveying of the University of Puerto Rico at Mayagüez (UPRM) since 1978. I have a BSCE from UPRM, and a MSCE and a PhD in the transportation engineering area from Purdue University. I am a registered professional engineer in Puerto Rico and in Indiana. In December 2009, I finished the academic requirements to obtain a Juris Doctor, JD, from the Eugenio María de Hostos Law School in Mayagüez, Puerto Rico.

In the academic phase, I have taught undergraduate courses such as Highway Location and Curve Design, Highway Engineering, Structural Design of Pavements, Asphalt Mixtures, Pavement Management and Road Safety, among others.

I have presented the findings of several research projects in technical conferences in the United States, Central and South America, Spain, Portugal, South Korea, Saudi Arabia, and Indonesia and in technical committees of several international professional organizations of which I am a member.

I have received awards for my scientific contribution, achievement and productivity in the civil engineering and transportation of institutions such as Chi Epsilon, Sigma Xi, UPRM, CIAPR, Purdue University and UPR.

Bhavinbhai Lakhani

Tue, 26 Mar 2024 15:17:20 +0100

BIENVENIDO MAUNAHAN

Thu, 13 May 2021 15:42:09 +0200

Biruk Tadele

Fri, 14 May 2021 11:48:28 +0200

Carlos Agelet de Saracibar

Fri, 27 May 2016 10:33:23 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Carmem Miranda Lage

Thu, 27 Dec 2018 19:49:53 +0100

Possui graduação em Engenharia Civil pela Universidade Federal de Viçosa (2006) e mestrado em Engenharia Civil pela Universidade Federal de Ouro Preto (2008). Atualmente é professor Assistente do Curso de Engenharia Civil com Ênfase em Estruturas Metálicas da Universidade Federal de São João del-Rei - Campus Alto Paraopeba - Ouro Branco. Atuou como engenheira de projetos de equipamentos/estruturas-Usiminas Mecânica e professora do curso de Engenharia Civil-Unipac. Tem experiência na áreas de engenharia Mecânica e Civil, com ênfase em Estruturas Metálicas.

Clara García

Wed, 22 Jun 2016 10:22:49 +0200

Cyrus Kelly Macabangon

Thu, 16 Oct 2025 10:03:53 +0200

Dan Karl Lui Tapales

Sun, 06 Jul 2025 14:04:13 +0200

David J. Vicente

Fri, 27 May 2016 11:16:53 +0200

David J. Vicente received the Bachelor's Degree, and subsequently the Master's Degree, in Civil Engineering from the Technical University of Madrid in 2009 and 2011, respectively, both specialising in Hydraulics. In 2017 he presented his thesis 'Design of pressure management operations in water distribution districts and analysis of their impact' with 'Excellent Cum Laude' qualification.

He has worked on multiple research projects, being his fields of expertise the application of numerical modelling and Machine Learning-based models to different areas of Hydraulic and Environmental Engineering: “Water Distribution Systems: modelling, pressure management and leakage management”, “Dam Engineering: geometric design, thermo-mechanical modelling”, “Prediction of water quality parameters and optimization of advanced treatments” and “Air quality forecasting”.

He is currently working for CIMNE (since October 2015), in the department of “Machine Learning in Civil Engineering” where he is involved in research, technical development (programming) and proposal development at national and European level. He is author or co-author of 9 articles in scientific journals and a book chapter as well as 25 contributions to conference proceedings. He is the creator of the 'AULA ETSI UPM-CIMNE', through which he collaborates with UPM in research and development of R+D+i projects, direction of Master's Thesis and Doctoral Thesis and teaching of classes

Dexter Serrano

Sun, 06 Jul 2025 11:13:35 +0200

Dr. Abdin Bedada

Tue, 17 Aug 2021 22:08:39 +0200

I have PhD in Civil Engineering from prestigious Indian Institute of Technology Ropar, I

have published a few papers in reputable international journals. Currently, I am advising 4

M.Sc students research and have been invited to examine theses as an internal and an

external examiner at my home university, Ambo University. I have been in academia for

the last 10 years, teaching courses in Civil Engineering undergraduate programs and also

delivering master's courses in Civil Engineering specializations construction engineering

and management. In addition, I have 5 years of experience in leading organizations, two

years of which were as a department head and 2 years as PG coordinator of the Hachalu

Hundessa Campus, Ambo University.

Dr. Leevesh Kumar

Sat, 08 May 2021 19:12:05 +0200

Dr. Leevesh Kumar—Associate Professor of Construction Engineering and Management

Dr. Leevesh Kumar is a distinguished academician and researcher with over 13 years of progressive experience in the field of civil and construction engineering across India, Ethiopia, the United Kingdom, and Bangladesh. Currently serving as an associate professor at the World University of Bangladesh and holding a concurrent part-time role with Liverpool John Moores University and the University of East London (UK), Dr. Kumar has built a diverse and global portfolio in higher education and construction technology research.

He holds a Ph.D. in Civil Engineering from Career Point University (India), preceded by both M.Tech and B.Tech degrees in Civil Engineering from Bhagwant University. His educational foundation is complemented by a postgraduate diploma and several certifications from prestigious institutions like IIT Madras and NITTTR Chandigarh. Throughout his academic journey, Dr. Kumar has remained committed to advancing sustainable practices in the construction industry.

Dr. Kumar’s research focuses on sustainable construction materials, with specific interest in the mechanical and durability properties of concrete incorporating fly ash, sandstone slurry, demolition waste, and industrial by-products. His work has addressed critical aspects such as concrete permeability, aggregate size optimization, autoclaved aerated concrete blocks, and environmentally responsible material sourcing.

With over 22 research publications in indexed journals (SCI, Scopus, WoS), 10 conference papers, four authored books, and two patents—including one for an ARM7 Processor-based Highway Bridge Monitoring System—Dr. Kumar has made a substantial contribution to the advancement of sustainable civil engineering. Notable among his publications are studies published in Materials Today: Proceedings, Solid State Phenomena, and Advances in Materials Science and Engineering. His recent work explores the correlation between material properties and structural performance, especially in low-carbon construction contexts.

He has also actively participated in community outreach and interdisciplinary projects. While at Ambo University, Ethiopia, he received the University President’s Certificate of Appreciation for his involvement in soil testing for hospital construction and his support for housing initiatives for underserved communities. He was also recognized by the Indian Embassy in Ethiopia for conducting sessions on International Yoga Day in Ethiopia.

In academic leadership roles, Dr. Kumar has served as head of department, discipline in-charge, PG coordinator, and university exam coordinator/superintendent across multiple institutions. He has played a pivotal role in curriculum design, assessment methodology, faculty development, and student supervision. His teaching portfolio covers core and advanced topics including quantity surveying, concrete technology, smart and sustainable construction, construction economics, AutoCAD, Primavera, STAAD Pro, BIM, and engineering materials and equipment.

Dr. Kumar is an editorial board member and reviewer for several international journals and conferences and maintains active affiliations with leading professional bodies, including the Institution of Engineers (India). His commitment to lifelong learning is evident through his participation in multiple faculty development programs and specialized workshops on data analysis, GIS, geopolymer concrete, and emerging software tools in civil engineering.

Known for his disciplined teaching methods and student-centric approach, Dr. Kumar is dedicated to nurturing the next generation of civil engineers who are environmentally conscious, technologically adept, and globally competitive. His pedagogical style emphasizes immersive learning, continuous evaluation, and the practical application of engineering concepts to solve real-world problems.

Dr. Kumar’s current projects explore digital construction tools and AI-assisted concrete diagnostics, aligning with global trends in smart infrastructure and decarbonized urban development. With a passion for research, capacity building, and innovation in construction management, he continues to shape academic discourse and industry practice in South Asia and beyond.

Elmar Witten

Wed, 13 Jan 2021 12:03:19 +0100

Elmer Agon

Thu, 13 May 2021 17:41:15 +0200

I have been in the the education profession as teacher and researcher for more than 15 years.

Eugenio Oñate

Wed, 25 May 2016 13:40:40 +0200

After completing a degree in Civil Engineering in July 1975 at the Technical Univ. of Valencia (Spain), he started postgraduate studies at the Civil Engineering Dept. of Swansea University, Wales, UK. There he completed in June 1976 a Master of Science degree (M.Sc. Thesis on Development of a finite strip method for analysis of bridges and folded plate structures) and later a Ph.D. degree (Dec. 1978) under the supervision of Prof. O. C. Zienkiewicz (Ph. D. Thesis on Plastic flow in metals with special reference to: I) Coupled thermal flow. II) Thin sheet metal forming). His Ph.D. studies were funded by an Alcoa Research Grant from USA.

In February 1979 he moved to the Technical University of Catalunya (UPC) in Barcelona, Spain, where he was hired as an Associated Professor on Structural Mechanics at the School of Civil Engineering. He became a Full Professor with tenure on June 1983. From March 1983 to March 1989 he was the Director of the School of Civil Engineering at UPC.

On March 1987 he founded CIMNE (International Center for Numerical Methods in Engineering, www.cimne.com), a research center specialized in the development and application of numerical methods in engineering. From March 1987 to June 2022 he was the Executive Vice-President and Director of CIMNE.

Has supervised 49 Ph.D. Thesis and 95 Master Thesis . 30 of his former students are now full professors in Universities in Spain (13), USA (4), UK (2) and Latin America (11). He has had a significant impact in the creation of new scientific groups in cooperation with his former students.

In 1989 he was the founder and first President of the Spanish Association for Numerical Methods in Engineering (SEMNI, www.cimne.upc.es/semni).

He was one of the founders and first Vice-President (1993-95) of the European Community on Computational Methods in Applied Sciences (ECCOMAS, www.eccomas.org)

His research activities have spread over a range of multidisciplinary fields which he has contributed relevant theories and methods of scientific and industrial relevance.

The above research lines have been developed in the framework of over 400 RTD projects carried out in cooperation with the main engineering companies in Spain and worldwide. Some 120 of these projects have been developed in the framework of EC programmes.

In parallel with the RTD activities, Eugenio Oñate has organized as chair person 45 international congresses on topics closely related with the above RTD lines. See list of congresses in www.cimne.com .

He has published 302 papers in scientific journals. He has written 4 text books and is the editor of 52 books in different topics of Computational Engineering Mechanics. He is the editor of three scientific journals (one of which is published by Springer) and 3 books series in Computational Mechanics. He is the author of 62 chapters in books, 40 monographs, 435 papers in conference proceedings and 230 research reports .

He has 4770 citations in the field of Computational Engineering Science. He has an h index of 42 and 19 papers with more than 50 citations.

He is regularly invited to deliver Keynote (Plenary) Lectures in the main International Conferences in Computational Engineering Science (25 Plenary Lectures and 30 Keynote lectures in the last 20 years).

His research work has been recognized in many Prizes and Awards.

FACUNDO ALONSO

Mon, 12 Jun 2017 23:46:30 +0200

Surface hydrology, rainfall-runoff modeling, flood forecasting and control, identification and stochastic parameter estimation, watershed management, global optimization, genetic algorithms.

Felix Santiago-Collazo

Sun, 18 Jun 2017 02:20:18 +0200

Interested on hydrologic and hydraulic modeling

Fernando Salazar

Fri, 27 May 2016 09:34:32 +0200

Fernando Salazar received the Degree on Civil Engineering from the Technical University of Madrid in 2002, specializing in Hydraulics. He has worked in several dam and hydraulic projects, as well as in the development of emergency plans and hazard-potential classification of dams (being Mequinenza and Riba-Roja, in the Ebro river, among them). He is working for CIMNE since 2009, where he is the current Project Development Director.

He obtained his PhD at the UPC in 2017, qualified as Excellent Cum Laude. It focused on the application of machine learning techniques to dam monitoring data analysis. In this field, he was winner of an International Challenge organized by Verbund, the greatest hydropower company in Austria.

He has been involved in several research projects in the fields of hydraulics, dam engineering and dam safety. He is author or co-author of 15 papers in scientific journals, and around 50 contributions in conference proceedings.

FRANCES LORANE R TUDDAO

Fri, 01 Sep 2023 02:14:37 +0200

Francisco Javier Domínguez Mota

Thu, 28 Sep 2017 03:57:46 +0200

Main interests: numerical modeling of engineering problems, modeling of shallow waters and groundwater infiltration, numerical solution of differential equations, numerical analysis, optimization, software engineering.

Coordinator of tha Aula-CIMNE Morelia, at the Universidad Michoacana, México.

President of the Mexican Association of Numerical Modeling in Engineering.

Francisco Zarate

Wed, 03 May 2017 14:14:40 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Gaia Pellegrini

Mon, 13 Jun 2016 03:11:53 +0200

Gesese Ganka

Sat, 15 May 2021 09:39:24 +0200

Girmaye Garedew

Mon, 21 Jun 2021 18:26:05 +0200

International Center for Numerical Methods in Engineering

Tue, 10 May 2016 11:44:46 +0200

The International Center for Numerical Methods in Engineering (CIMNE) is a research organization created in 1987 at the heart of the prestigious Technical University of Catalonia (UPC) as a partnership between the Government of Catalonia and UPC, in cooperation with UNESCO. The aim of CIMNE is the development of numerical methods and computational techniques for advancing knowledge and technology in engineering and applied sciences.

CIMNE’s headquarters are located at the heart of the Technical University of Catalonia (UPC) in Barcelona. CIMNE has also premises at different buildings in several campus of the UPC. CIMNE has also offices in Spain (Madrid, Terrassa and Ibiza). In 2005 CIMNE started its international expansion and since then has created the following international branches: CIMNE Latinoamerica (Non-profit Foundation in Santa Fe, Argentina); CIMNE USA (Non-profit Corporation in Washington DC, USA); CIMNE Singapore (Non-profit Corporation in Singapore) and CIMNE Beijing (China).

CIMNE employs some 250 scientists and engineers who work in the different offices of CIMNE around the world. CIMNE has also established a network of 30 Classrooms in partnership with Universities in Spain and 11 Latin American countries.

The research and technology development (RTD) activities of CIMNE cover a wide spectrum of topics ranging from classical engineering fields such as civil, mechanic, environmental, naval, marine and offshore, food, telecommunication and bio-medical engineering, computer sciences and applied sciences such as material sciences bio-medicine, computational physics, nature, social and economic sciences and multimedia sciences, among others.

Over its history, CIMNE has taken part in over 2,000 RTD projects in cooperation with some 500 companies, universities and research centers worldwide.

JEMAR MARCOS

Sun, 06 Jul 2025 11:46:49 +0200

I am Engr. Jemar Pascual-Marcos, a licensed civil engineer and dedicated college instructor. I handle core engineering subjects, focusing on bridging theoretical concepts with practical applications to prepare students for professional practice. I have experience serving as a panelist for bachelor’s thesis defenses, providing critical feedback and guidance to ensure the quality and rigor of student research. Currently, I am enrolled in a master’s degree program to further advance my professional expertise and academic growth. Through teaching, mentoring, and continued learning, I strive to help develop skilled, ethical, and forward-thinking engineers.

Joaquín Irazábal González

Mon, 27 Jun 2016 13:36:07 +0200

My professional career is being developed mainly in the field of calculation of structures using numerical methods.

Since November 2011 I work in the International Centre for Numerical Methods in Engineering (CIMNE) in Madrid developing research projects in Civil Engineering. The projects focus on the possibilities of using particle methods for the calculation of the behaviour of granular materials, specifically, the Particle Finite Element Method (PFEM) and the Discrete Element Method (DEM).

During my years at the CIMNE I studied the Master of Numerical Methods in Engineering at the Polytechnic University of Catalonia (UPC) and my PhD thesis entitled "Numerical analysis of railway ballast behaviour using the Discrete Element Method", presented on October 6, 2017, also at the UPC. The thesis, awarded the XVI Talgo Prize for Technological Innovation, was focused on the application of the Discrete Elements Method to the calculation of the behaviour of railway ballast.

JOHN MICHAEL B. CASIBANG

Mon, 15 Sep 2025 07:17:22 +0200

JOHN MICHAEL CASIBANG

Fri, 01 Sep 2023 02:31:40 +0200

Jonathan Colom Cobb

Wed, 22 Feb 2017 11:07:31 +0100

Jonathan Colom Cobb recently finished his degree in Marine Engineernig and Naval Architecture (2015) at the Technical University of Madrid (UPM). At the present time, he is a research Engineer at CIMNE and is starting his PhD.

During his degree, Jonathan already showed interest in numerical methods and computational science by first working as a scholar at CEHINAV (Canal de Ensayos Hidrodinamicos de la Escuela Técnica Superior de Ingenieros Navales, Madrid) and then starting an internship at CIMNE that lasted over a year. Now that he has finished his degree, he is starting his PhD under the supervision of Dr. Julio García Espinosa at CIMNE.

Jordi Pons Prats

Thu, 30 Mar 2017 18:16:06 +0200

Dr. Jordi Pons-Prats is a Mechanical Engineer. His activity in the last 15 years has combined a research career in the field of optimization, robust design and stochastic analysis and the work experience in project management in the industrial sector. His research is focus on the development and application of optimization methods for Robust Design.

His industrial work experience is based in his technical background and his project management skills. He spent 3 years in the software industry, 3 years in the home appliances industry and 4 years in the aeronautical sector. He did his PhD as part-time student at CIMNE from 2003 to 2011. From 2008 he is the responsible of the aeronautical group of CIMNE, and a researcher in the Optimization and Artificial Intelligence field. He has published 9 scientific papers in JCR journals. He has 3 citations and a h-index of 1 (Source: Web of Knowledge).

He is the coordinator of the Iberia East Pilot Center of ERCOFTAC (www.ercoftac.org), and the Spanish National Contact Point of EASN (www.easn.net). He also collaborates with BAIE (Barcelona Aeronautica I Espai, www.baie.cat), the Catalan association of aeronautical industry

Joylene D. Dayrit

Tue, 23 Sep 2025 05:10:31 +0200

I am a dedicated student researcher at Cagayan State University, majoring in Civil Engineering with a focus on Transportation. My experience includes conducting research projects related to transportation infrastructure, traffic management, and sustainable development. I have also gained valuable skills in data collection, analysis, and technical reporting. Through my academic journey, I am passionate about applying theoretical knowledge to practical solutions and continuously enhancing my understanding of civil engineering principles.

Juan Camilo Molina-Villegas

Mon, 30 Dec 2019 16:25:00 +0100

Julio García-Espinosa

Tue, 10 May 2016 11:43:04 +0200

MSc in Naval Architecture and Marine Engineering by the Technical University of Madrid (UPM) and PhD in Civil Engineering by the Technical University of Catalonia (UPC).

Currently, I am full professor of shipbuilding technology at the Higher Technical School of Naval Architects and Offshore Engineers (ETSIN) of the Technical University of Madrid and the Deputy Director of Institutional Relations.

I conduct my research in collaboration with the Model Basin Research Group at ETSIN (CEHINAV) and the International Center for Numerical Methods in Engineering (CIMNE). My research career has focused on developing computational models for fluid-structure interaction analysis and their application to the design and verification of ships, platforms, and marine structures.

I am the author of more than 35 articles published in first-tier international journals, have presented over 80 papers at international conferences, and have participated in more than 25 European or international research projects.

Additionally, I have been the promoter and co-founder of Compass IS, a company specializing in engineering design, and Scipedia, the developer of the platforms Scipedia.com and BIM TeamUp.

Karen Joy Alaska

Mon, 07 Jul 2025 07:50:15 +0200

Karl Louie Quezon

Fri, 14 May 2021 06:13:38 +0200

Kimberly Linda

Sun, 06 Jul 2025 11:24:07 +0200

LEILSON JOAQUIM ARAUJO

Tue, 18 Sep 2018 21:00:43 +0200

Civil engineer, founding member of the Civil Engineering Academic Center (CAEC-IFG / FORMOSA). Both are linked to the Federal Institute of Education, Science and Technology of Goiás, Campus Formosa. Researcher in the area of numerical modeling of structures, with emphasis on concrete dams by gravity. He has knowledge and experience in the area of works supervision

Leticia del Valle Vicario

Mon, 12 Jun 2017 17:53:01 +0200

PhD. MSc. Prof.

Áreas de conocimiento en interés (Knowledge and interest):

Ingeniería Civil (Civil Engineering)

Recursos Hídricos (Water resources)

Hidrología (Hydrology)

Fenómenos hidrológicos extremos (Extreme hydrological phenomena)

Lin Li

Thu, 30 Apr 2020 06:46:46 +0200

Luis Godoy

Thu, 04 May 2017 14:45:52 +0200

I completed my Ph.D. at University College London, in England, in 1979, and worked at the University of Cordoba in Argentina, CONICET in Argentina, West Virginia University in Morgantown, WV, USA, and University of Puerto Rico, Mayaguez, Puerto Rico.

My areas of research interest are analysis and behavior of thin walled structures, with current emphasis on oil storage tanks; computational material science, with emphasis on multiscale analysis of composites and metal alloys; and history of Mechanics.

María Jesús Samper

Mon, 27 Jun 2016 12:33:57 +0200

Please, write a brief description of your experience in research, teaching and/or education.

María Jesús Samper - RIMNI

Fri, 14 Oct 2016 11:26:46 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Mario Marmolejo

Fri, 16 Aug 2019 15:57:26 +0200

Assistant Professor at Universidad del Quindío in Armenia, Colombia, with MSc. and Ph. D in Structural Engineering. "My research interest is about structural dynamics, structural health monitoring and structural analysis.

Mark John Lester Apostol

Sun, 06 Jul 2025 11:40:03 +0200

Miguel Angel Celigueta

Tue, 25 Apr 2017 12:44:06 +0200

I am right between Engineering and Software development.
Working at CIMNE since 2004, I have been involved and led research projects in a wide range of fields: harbours & waves, oil & gas drilling, aerodynamics, landslides, agriculture,... I developed a software for free surface flows (www.cimne.com/pfem/) and after that, one for particles (http://www.cimne.com/dem/), but I also found myself developing parts of standard CFD and structural (CSM) codes.
In these years I have become an experienced programmer mainly in Object Oriented languages (C++, Python) and also Matlab. Subversion or Git (preferably the second) are a must for the best team work.
As an Engineer, the goal of each project is my main concern, and software is just a handy tool.
The lectures on Theory of Finite Elements and structures given at the University since 2010 were a good complement to my practical work at CIMNE.

Neildean Ordinario

Sun, 06 Jul 2025 12:05:17 +0200

Pablo Aníbal López-Yánez

Fri, 29 Jun 2018 16:02:11 +0200

Pavel Ryzhakov

Wed, 05 Apr 2017 14:01:19 +0200

Pedro C. S. Vieira

Sun, 25 Jun 2017 02:29:07 +0200

Possuo graduação em Engenharia Civil pela Universidade Federal do Piauí (1995), mestrado em Estruturas e Construção Civil pela Universidade de Brasília (1999) e doutorado em Estruturas e Construção Civil pela Universidade de Brasília (2004). Atualmente sou professor adjunto da Universidade Federal da Bahia. Tenho experiência na área de Engenharia Civil, com ênfase em Mecânica Computacional, atuando principalmente nos seguintes temas: concreto armado, estruturas metálicas, dimensionamento estrutural, análise estrutural, síntese estrutural, redistribuição de esforços solicitantes, superfícies de interação, regressão linear múltipla, elementos finitos e métodos numéricos.

Endereço para acessar meu curriculum vitae:
http://lattes.cnpq.br/4752685298064091

RALPH ANGELO ESTILLER

Wed, 30 Aug 2023 15:01:25 +0200

I am a full time civil engineering instructor at Cagayan State University and also a young researcher with research interest in disaster management, traffic engineering, and climate change

Ramon Ribó

Mon, 23 May 2016 21:56:01 +0200

I am the CEO of Compass Ingenieria y Sistemas, SA a technological company that develops and comercializes software for engineering simulation.

As a Civil Engineer pHD, I am interested in technological innovation, specially from a business point of view.
My personal objective is to understand how to add value from the I+D to the enterprise and create products that can enter into competition in the international technological market.

Specialties: My field of knowledge is about developing great software for Computer Simulation in Engineering including Structural Analysis, Mesh generation, CFD, etc.

Romar Tubon

Mon, 07 Jul 2025 06:56:35 +0200

Scipedia content

Tue, 24 May 2016 18:06:29 +0200

Scipedia is a scientific and technical digital publisher and professional social network. Scipedia aims to connect researchers and professionals in science and technology and facilitate them to share knowledge, expertise and the outcome of their work.

Sergio Idelsohn

Fri, 27 May 2016 10:17:50 +0200

Shelvin Atilano

Sun, 10 Jul 2022 08:37:14 +0200

A pro-active and energetic Civil Engineer/Master Plumber/ Materials Engineer with sound technical knowledge. Highly motivated and optimistic professional, capable of working on its own initiative or as a part of a team with excellent analytical and problem solving skills. Willing to invest time and effort to complete a certain responsibility and sets high standard of quality in any task undertaken and contributes total commitment and dedication to achieve those objectives.

SITESH KUMAR SINGH

Sun, 06 Jul 2025 06:37:23 +0200

Syed Mostofa Asif

Tue, 10 Jun 2025 15:03:38 +0200

Volker Mathes

Wed, 13 Jan 2021 11:14:44 +0100

The AVK, as the German professional association for fibre reinforced plastics/composites, represents the interests of producers and processors of reinforced plastics/composites on a national and a European level. The AVK was founded in 1924 and currently has over 220 member companies (in Germany and abroad) and is therefore one of the largest associations in the European composites sector.

It represents members along the entire value-added chain in the area of reinforced plastics. Its members include manufacturers and suppliers of raw materials as well as processing companies, machine-tool manufacturers, engineering firms, testing authorities and scientific

institutions. The association represents both small and medium-sized companies as well as major multinational concerns.

The AVK is integrated into a strong network of German and European partners. For example, it is one of four sponsoring associations of the GKV - the umbrella organisation of the German plastics converters industry and represented in both the executive and board.

In addition, AVK is a foundation member of the German Composites Umbrella organization “Composites Germany”. Furthermore AVK is represented on the board of the European Composites Industry Association (EuCIA).

Xavier Oliver

Sun, 05 Jun 2016 09:30:58 +0200

Yang Liu

Thu, 17 Aug 2017 20:19:16 +0200

From September 2010 to April 2013, studied at the Department of Civil Engineering of Northwestern Polytechnical University and received a master's degree in engineering. From 2013 to April 2019, studied at the Department of Engineering Mechanics of Northwestern Polytechnical University, mainly researched the seismic performance of reinforced concrete structures, and obtained a doctorate degree. In 2019, entered the School of Civil Engineering and Architecture, Zhejiang University of Science and Technology, and became a lecturer.In 2023, joined the Department of Engineering Management, School of Business, Shanghai Jian Qiao University.

Yunche Wang

Tue, 01 Dec 2020 20:30:04 +0100