Scipedia: Lourdes Blanco Salgado's friends

Ainhoa Arrese

Fri, 29 Apr 2022 18:47:27 +0200

Ainhoa Arrese Arratibel es actualmente Profesora Titular de Universidad de Mecánica de los Medios Continuos y Teoría de las Estructuras en la Universidad del País Vasco en la Escuela de Ingeniería de Gipuzkoa.

Pertenece al Grupo de Investigación "Mecánica de Materiales" MECMAT de la Universidad del País Vasco.

Se incorporó al Departamento de Mecánica de la Escuela de Ingeniería de Gipuzkoa en 2005 como becaria de doctorado financiada por la Diputación Foral de Gipuzkoa, investigando sobre nuevos métodos de ensayo para caracterizar el comportamiento de fractura interlaminar de materiales compuestos unidireccionales. Obtuvo el título de doctora en 2009.

Los intereses de investigación se centran en el área de la Mecánica de los Composites, en la caracterización mecánica de composites de fibra continua y uniones adhesivas para aplicaciones estructurales. Su interés de investigación actual se centra en el desarrollo de una metodología experimental fiable para la caracterización precisa del comportamiento de fractura de las uniones adhesivas.

Es autora o coautora de 18 artículos en revistas internacionales revisadas por pares (factor h de 11, proporcionado por Scopus) y ha participado en varios (6) proyectos de investigación regionales en este campo. Ha contribuido con más de 25 ponencias y pósters en congresos nacionales e internacionales.

Aitana Gutierrez

Sat, 30 Apr 2022 10:57:09 +0200

Tecnico I+D

Alberto Pedreira

Sat, 30 Apr 2022 18:39:05 +0200

Alex Barbat

Fri, 21 Jul 2017 14:29:19 +0200

Civil Engineer (1970) and Doctor in Engineering (1978) by the Technical University of Iasi, Romania; Ingeniero de Caminos Canales y Puertos (1986) and Doctor Ingeniero de Caminos Canales y Puertos (1989) by the Technical University of Catalonia (UPC-BarcelonaTech, Spain. Professor of Structural Mechanics and of Earthquake Engineering at the UPC. Professor Emeritus since 2017. Senior researcher at the International Centre of Numerical Methods in Engineering (CIMNE: www.cimne.com) Barcelona, Spain. Supervisor of 38 doctoral theses. Current research interests: seismic analysis and design of structures; evaluation of the seismic damage of structures; seismic vulnerability and risk evaluation; and active and passive control of structures. Publications: 8 books, 127 articles in journals indexed in the ISI Web of Knowledge or SCOPUS and 75 peer reviewed articles in other national and international journals. Collaboration in 15 projects in the framework of RTD programs of the European Commission, 11 of them as main researcher; in 22 projects funded by Spanish Ministries, 14 of them as main researcher. 25 consultancy contracts with Spanish and international companies or institutions like the World Bank, the Inter-American Development Bank or the United Nations Office for Disaster Risk Reduction, UNISDR. Co-editor of Revista Internacional de Ingeniería de Estructuras, Quito, Ecuador and of Revista Internacional de Desastres Naturales, Accidentes e Infraestructura Civil, Puerto Rico. Editor of the Monograph Series in Earthquake Engineering, CIMNE, http://www.cimne.com/tiendacimne/monotema.asp?id_tema=10 President of the Spanish Association of Earthquake Engineering, AEIS; head of the Risk Assessment Group, http://rag.cimne.com/, CIMNE Doctor Honoris Causa by the by the “Ovidius” University, Constantza, Romania, by the Technical University “Gh. Asachi” of Iasi, Romania and by the Technical University of Cluj-Napoca, Romania.

ALFONSO CORZ

Sat, 30 Apr 2022 20:42:01 +0200

I am 30 years of experience in I+D+I, full Professor at University of Malaga and University of Cadiz.

Andrea Torre Poza

Fri, 19 May 2023 09:24:53 +0200

Researcher in polymers and composite materials

Ángel Rodríguez

Mon, 14 Apr 2025 23:47:09 +0200

Araceli Gálvez Moreno

Thu, 18 May 2023 12:55:34 +0200

Researcher in the R&D Center of Acciona Construccion for the last 14 years. During this time I have always been involved in innovative projects of construction materials improvement: energy efficient materials, lightweight materials, polymeric materials...

Aroa Iriarte Legarreta

Fri, 29 Apr 2022 20:33:32 +0200

Senior Engineer from the School of Mechanical Engineers of San Sebastian, University of Navarra (2003). Since 2004 I have been a researcher in the Industry and Mobility Unit of Tecnalia Research & Innovation within the manufacturing processes and materials department. I have participated in different research projects, both national and European.

The main industrial sectors of the projects in which I have participated are the automotive, aeronautics and space. The main lines of work are the manufacturing processes in composite material especially focused on rapid manufacturing processes such as direct resistive heating or the design and manufacture of molds or self-heating membranes.

Borja Martinez Martinez

Fri, 29 Apr 2022 10:07:11 +0200

PhD. student in ESEIAAT-UPC, Terrassa.

Cristian Builes

Tue, 15 Apr 2025 10:57:29 +0200

Researcher composite materials | MSc. Mechanics of materials and structures | Ph. D in Technology: Composites Manufacturing

Aeronautical engineer with over 6 years experience in the field of manufacturing processes for carbon fiber-based thermosetting materials, mainly for aeronautical industry. Liquid composite molding techniques as liquid resin infusion (LRI), and conventional and high-pressure resin transfer molding (RTM/HP-RTM)

Daniel Di Capua

Fri, 23 Dec 2016 12:10:56 +0100

Dr. Daniel Di Capua is Civil Engineer and is currently professor of Strength of Materials at the Technical University of Catalonia, UPC-BarcelonaTech . His current research fields are Computational Methods in Solid Mechanics and Structures.

He is senior researcher at the International Center of Numerical Methods in Engineering, CIMNE, Barcelona, Spain, where he collaborated in research projects in the framework of RTD programs funded by different Spanish Ministries, and in many consultancy contracts with Spanish and international companies or institutions.

Daniel Jose Rodriguez del Rosario

Sat, 30 Apr 2022 16:58:03 +0200

Researcher at aimen technology centre.

David Garcia-Sanoguera

Thu, 28 Apr 2022 13:16:23 +0200

I have 4 six-years research quality premiums of research, the last of them corresponds to the period 2012-2018. On the other hand, he has directed 6 doctoral theses in doctoral programs with a Quality Mention. According to the Web of Science (WOS) database, the number of publications is 83 indexed in the Journal of Citations Report (JCR), with a total number of 1876 citations, with an average of 23.2 citations per article. The number of citations in the last 5 years has been 257 with an average of 51.4 citations per article. The researcher's H-Index is currently 25 according to the WOS database and 28 according to the Scopus database.

I have held the following management positions within the Polytechnic University of Valencia (UPV): Associate Dean of Masters, Postgraduate Training and infrastructure at the Higher Polytechnic School of Alcoy (EPSA) from April 2017 to December 2020; Deputy Director of the Department of Mechanical Engineering and Materials of the UPV from July 2012 to November 2016. In addition, since July 2015, I have been Academic Director of the Degree in Mechanical Engineering of the EPSA, qualification with the EUR-ACE Seal of Excellence.

Elena Del Puerto Nevado

Fri, 29 Apr 2022 11:41:55 +0200

Doctoral degree in Chemistry developed in the “Consejo Superior de Investigaciónes Científicas” (CSIC) and specialized in technological materials. The doctoral training was carried out in Madrid and in several international institutions located in Canadá, Italy and Germany.

Highly experienced in analytical techniques and composite materials, currently working on aircraft industry, especially in composite material department in the Aibus commercial dicvision as an airframe Technical Advisor Organic Materials Characterisation.

Eugenio Oñate

Wed, 25 May 2016 13:40:40 +0200

After completing a degree in Civil Engineering in July 1975 at the Technical Univ. of Valencia (Spain), he started postgraduate studies at the Civil Engineering Dept. of Swansea University, Wales, UK. There he completed in June 1976 a Master of Science degree (M.Sc. Thesis on Development of a finite strip method for analysis of bridges and folded plate structures) and later a Ph.D. degree (Dec. 1978) under the supervision of Prof. O. C. Zienkiewicz (Ph. D. Thesis on Plastic flow in metals with special reference to: I) Coupled thermal flow. II) Thin sheet metal forming). His Ph.D. studies were funded by an Alcoa Research Grant from USA.

In February 1979 he moved to the Technical University of Catalunya (UPC) in Barcelona, Spain, where he was hired as an Associated Professor on Structural Mechanics at the School of Civil Engineering. He became a Full Professor with tenure on June 1983. From March 1983 to March 1989 he was the Director of the School of Civil Engineering at UPC.

On March 1987 he founded CIMNE (International Center for Numerical Methods in Engineering, www.cimne.com), a research center specialized in the development and application of numerical methods in engineering. From March 1987 to June 2022 he was the Executive Vice-President and Director of CIMNE.

Has supervised 49 Ph.D. Thesis and 95 Master Thesis . 30 of his former students are now full professors in Universities in Spain (13), USA (4), UK (2) and Latin America (11). He has had a significant impact in the creation of new scientific groups in cooperation with his former students.

In 1989 he was the founder and first President of the Spanish Association for Numerical Methods in Engineering (SEMNI, www.cimne.upc.es/semni).

He was one of the founders and first Vice-President (1993-95) of the European Community on Computational Methods in Applied Sciences (ECCOMAS, www.eccomas.org)

His research activities have spread over a range of multidisciplinary fields which he has contributed relevant theories and methods of scientific and industrial relevance.

The above research lines have been developed in the framework of over 400 RTD projects carried out in cooperation with the main engineering companies in Spain and worldwide. Some 120 of these projects have been developed in the framework of EC programmes.

In parallel with the RTD activities, Eugenio Oñate has organized as chair person 45 international congresses on topics closely related with the above RTD lines. See list of congresses in www.cimne.com .

He has published 302 papers in scientific journals. He has written 4 text books and is the editor of 52 books in different topics of Computational Engineering Mechanics. He is the editor of three scientific journals (one of which is published by Springer) and 3 books series in Computational Mechanics. He is the author of 62 chapters in books, 40 monographs, 435 papers in conference proceedings and 230 research reports .

He has 4770 citations in the field of Computational Engineering Science. He has an h index of 42 and 19 papers with more than 50 citations.

He is regularly invited to deliver Keynote (Plenary) Lectures in the main International Conferences in Computational Engineering Science (25 Plenary Lectures and 30 Keynote lectures in the last 20 years).

His research work has been recognized in many Prizes and Awards.

Faustino Mujika

Fri, 29 Apr 2022 20:17:53 +0200

Faustino Mujika is Professor of the Department of Mechanical Engineering in the field “Mechanics of Continuum Media and Theory of Structures”in the Faculty of Engineering of Gipuzkoa, at the University of the Basque Country (UPV/EHU). He obtained the Master Degree in Mechanical Engineering in the High Technical School of Engineers of San Sebastian (University of Navarra).

With respect to undergraduate teaching, he has been involved in subjects related to Rigid Body Mechanics and Mechanics of Materials. He has also been teaching Mechanics of Composite Materials in Master studies in the Faculty of Engineering of Gipuzkoa and in the Faculty of Engineering of Bilbao. He has supervised 9 doctoral theses related to the mechanical behaviour of Composite Materials.

Concerning research activity, he has analyzed mechanical tests related to flexural behaviour of composite laminates, introducing new test methodologies and novel test methods. Simple and low cost test methods have been proposed by using more developed novel analytical methods. Nowadays he is the head of “Mechanics of Materials” Group. He has attended numerous national and international conferences. He is coauthor in more than 50 articles included in the Web of Science, 27 of them having direct relation with the 9 supervised doctoral theses.

Felipe García Sánchez

Tue, 12 Apr 2022 10:54:15 +0200

Francesc Robles

Fri, 29 Apr 2022 22:03:42 +0200

Ingeniero técnico industrial, inspector de recubrimientos certificado y director de la División de Ingeniería Aplicada de Grupo Navec, con 12 años de experiencia en la dirección técnica y económica de actividades especiales de mantenimiento industrial. Responsable del desarrollo de la tecnología patentada por Grupo Navec para reparar tuberías y recipientes a presión con fibra de carbono, premiada por la organización más importante del mundo de los materiales compuestos, en los JEC Innovation Awards.

Francisco de Asís Simón Fuentes

Fri, 29 Apr 2022 13:11:59 +0200

Research and development in composite structures for aeronautics in the frame of Clean Sky & Clean Aviation Joint Undertaking.

Francisco José García Piñeiro

Tue, 12 Apr 2022 09:30:31 +0200

Innovation Engineer in Patentes Talgo since 2019, working in rail lightweitgh component structures (running gear, carbodies,...) development.

Francisco Zarate

Wed, 03 May 2017 14:14:40 +0200

Please, write a brief description of your experience in research, teaching and/or education.

Gabriel Bugeda

Fri, 05 May 2017 10:54:36 +0200

Garazi Goenaga Goicoechea

Wed, 13 Apr 2022 10:23:09 +0200

Helena ABRIL

Wed, 25 May 2022 14:11:10 +0200

Bachelor's degree in Chemistry, specializing in polymers. Master's degrees in Innovation, Marketing and Communications. Broad knowledge and experience in B2B Composites Industry. Leading the project of dynamization of the Spanish Composite Community through AEMAC.

Ignacio Aguaded

Wed, 10 Apr 2019 08:58:58 +0200

Ph.D. Ignacio Aguaded is a Full Professor of Media Education and Technologies applied to Education at the University of Huelva (Spain). He has a degree in both Spanish Studies and Education and also holds a PhD. He is currently Vice-Chancellor for Technology and Quality at the University of Huelva. He is the founding President of Comunicar (a group of teachers and journalists that aims to raise the profile of media education), edits the Research Journal «Comunicar» (ISSN: 1134-3478) (indexed in Scopus-Q1 and Journal Citation Reports-Q1) and is also a regular contributor to various international publications. He has led the Research Group «Agora», part of the Andalusia Research Plan and has conducted various research projects within the framework of Spanish and International programmes, such as Interreg III, E-learning, and INTI, all related with the area of media education. He has lectured at National and International forums, conferences and universities. Author and co-author of a long list of scientific books and papers, such as «Convivir con la televisión» (1999), «Tecnologías para la educación: diseño, producción y medios para la formación docente» (2003), «La Universidad y las tecnologías de la información y el conocimiento» (2009), etc., he has also chaired over twenty international scientific events,

Inés Iváñez

Thu, 18 May 2023 11:31:42 +0200

Profesora Titular de Universidad en el Dpto. de Mecánica de Medios Continuos y Teoría de Estructuras de la Universidad Carlos III de Madrid.

International Center for Numerical Methods in Engineering

Tue, 10 May 2016 11:44:46 +0200

The International Center for Numerical Methods in Engineering (CIMNE) is a research organization created in 1987 at the heart of the prestigious Technical University of Catalonia (UPC) as a partnership between the Government of Catalonia and UPC, in cooperation with UNESCO. The aim of CIMNE is the development of numerical methods and computational techniques for advancing knowledge and technology in engineering and applied sciences.

CIMNE’s headquarters are located at the heart of the Technical University of Catalonia (UPC) in Barcelona. CIMNE has also premises at different buildings in several campus of the UPC. CIMNE has also offices in Spain (Madrid, Terrassa and Ibiza). In 2005 CIMNE started its international expansion and since then has created the following international branches: CIMNE Latinoamerica (Non-profit Foundation in Santa Fe, Argentina); CIMNE USA (Non-profit Corporation in Washington DC, USA); CIMNE Singapore (Non-profit Corporation in Singapore) and CIMNE Beijing (China).

CIMNE employs some 250 scientists and engineers who work in the different offices of CIMNE around the world. CIMNE has also established a network of 30 Classrooms in partnership with Universities in Spain and 11 Latin American countries.

The research and technology development (RTD) activities of CIMNE cover a wide spectrum of topics ranging from classical engineering fields such as civil, mechanic, environmental, naval, marine and offshore, food, telecommunication and bio-medical engineering, computer sciences and applied sciences such as material sciences bio-medicine, computational physics, nature, social and economic sciences and multimedia sciences, among others.

Over its history, CIMNE has taken part in over 2,000 RTD projects in cooperation with some 500 companies, universities and research centers worldwide.

Itxaro Sukia

Fri, 29 Apr 2022 12:43:47 +0200

PhD Student at mondragon Unibertsitatea. Researcher in Polymers and Composites Tecnologies department.

Itziar Adarraga

Wed, 27 Apr 2022 18:16:49 +0200

Ingeniera de materiales y Doctora por la Universidad del País Vasco. Actualmente Profesora agregada en el Departamento de Ingeniería Mecánica en la Escuela de Ingeniería de Gipuzkoa. Mi actividad docente está centrada en los grados de Ingeniería Mecánica e Ingeniería Civil. En cuanto a la investigación, pertenezco al grupo de investigación Mecánica de Materiales de la universidad del País Vasco. La actividad investigadora está orientada al campo de los elementos finitos y su aplicación en el análisis de los materiales compuestos.

Iván Doménech

Sun, 21 May 2023 00:46:43 +0200

Chemical and materials engineer

Ivan Saenz-Dominguez

Fri, 19 May 2023 08:15:08 +0200

Jesús Sánchez Pinedo

Mon, 24 Aug 2020 09:22:22 +0200

Jon Aurrekoetxea

Fri, 29 Apr 2022 12:43:42 +0200

Dr. Aurrekoetxea focuses his research on the study of the material-process-property relationship for lightweight fibre reinforced composites, with special emphasis on impact-resistant and damage tolerant materials manufactured by resin transfer moulding, stamp-forming and additive manufacturing. He is co-author of 65 papers in peer-review journals (62% in Q1) and cited more than 1000 times. He is also certified by the PMI (2316080) as a Project Management Professional (PMP)®.

Jordi Pons Prats

Thu, 30 Mar 2017 18:16:06 +0200

Dr. Jordi Pons-Prats is a Mechanical Engineer. His activity in the last 15 years has combined a research career in the field of optimization, robust design and stochastic analysis and the work experience in project management in the industrial sector. His research is focus on the development and application of optimization methods for Robust Design.

His industrial work experience is based in his technical background and his project management skills. He spent 3 years in the software industry, 3 years in the home appliances industry and 4 years in the aeronautical sector. He did his PhD as part-time student at CIMNE from 2003 to 2011. From 2008 he is the responsible of the aeronautical group of CIMNE, and a researcher in the Optimization and Artificial Intelligence field. He has published 9 scientific papers in JCR journals. He has 3 citations and a h-index of 1 (Source: Web of Knowledge).

He is the coordinator of the Iberia East Pilot Center of ERCOFTAC (www.ercoftac.org), and the Spanish National Contact Point of EASN (www.easn.net). He also collaborates with BAIE (Barcelona Aeronautica I Espai, www.baie.cat), the Catalan association of aeronautical industry

José Antonio Sánchez Garrucho

Fri, 29 Apr 2022 09:39:28 +0200

Ingeniero mecánico

Juan Manuel González Cantero

Fri, 22 Apr 2022 13:45:52 +0200

Manufacturing process simulation engineer at Airbus Group and Doctor of Mechanical Engineering from Universidad de Sevilla.

Juan Piñuela Noval

Fri, 19 May 2023 10:34:52 +0200

Asturias, Ciencia y Fútbol. En ese orden

Juan-Antonio Almazán-Lázaro

Sat, 30 Apr 2022 11:28:03 +0200

Researcher and Associate Lecturer at the Mechanical and Mining Department of University of Jaén.

Expertise in composite material manufacturing and CAE for Design and Validation.

Julio García-Espinosa

Tue, 10 May 2016 11:43:04 +0200

MSc in Naval Architecture and Marine Engineering by the Technical University of Madrid (UPM) and PhD in Civil Engineering by the Technical University of Catalonia (UPC).

Currently, I am full professor of shipbuilding technology at the Higher Technical School of Naval Architects and Offshore Engineers (ETSIN) of the Technical University of Madrid and the Deputy Director of Institutional Relations.

I conduct my research in collaboration with the Model Basin Research Group at ETSIN (CEHINAV) and the International Center for Numerical Methods in Engineering (CIMNE). My research career has focused on developing computational models for fluid-structure interaction analysis and their application to the design and verification of ships, platforms, and marine structures.

I am the author of more than 35 articles published in first-tier international journals, have presented over 80 papers at international conferences, and have participated in more than 25 European or international research projects.

Additionally, I have been the promoter and co-founder of Compass IS, a company specializing in engineering design, and Scipedia, the developer of the platforms Scipedia.com and BIM TeamUp.

Kirsa Munoz Sanchez

Fri, 29 Apr 2022 09:07:40 +0200

Lourdes Sánchez Nacher

Thu, 28 Apr 2022 13:06:04 +0200

La Dra. Lourdes Sánchez Nacher desarrolla su actividad docente en el Departamento de Ingeniería Mecánica y de Materiales, en el Área de Ciencia de los Materiales e Ingeniería Metalúrgica. Actualmente ocupa una plaza de Catedrática de Universidad. Su actividad investigadora se desarrolla en el Instituto de Tecnología de Materiales de la UPV en el “GRUPO DE INVESTIGACIÓN EN FORMULACIÓN, PROCESADO Y MODIFICACIÓN SUPERFICIAL DE POLÍMEROS, GiProSup”, grupo que centra su actividad en las siguientes líneas de trabajo: (1), Optimizar las formulaciones de materiales poliméricos mediante el empleo de partículas y nanopartículas y ofrecer materiales multifuncionales. (2) Metodologías de caracterización avanzada de materiales poliméricos, compuestos y superficies, (3) Técnicas que permitan modificar selectivamente las propiedades superficiales de materiales poliméricos y compuestos sin alterar el resto de material con el fin de mejorar propiedades adhesivas, hidrofílicas, hidrofóbicas, superhidrofóbicas, etc. y (4) Ofrecer a la industria de los materiales compuestos y plásticos reforzados una serie de soluciones para la mejora de los fenómenos de interacción fibra/partícula.

Luis Carral

Sat, 30 Apr 2022 13:07:47 +0200

I work at the Advanced Material Department at the Technology Center AIMEN (https://www.aimen.es/en)

Malte Frovel

Mon, 18 Apr 2022 14:54:18 +0200

Researcher in R&D centers in Germany and Spain. Participation in 6 national and 12 international projects, leading two of the international projects and one of the national ones as head of the project by INTA and leading two national project as IP.  Taught 11 courses of a total of 31 hours to command staff of the air force and OPIs personnel and courses at the university of a total of 365 hours  Author of 2 book chapters and a monograph,  19 publications in magazines (including 5x Q1, 4x Q2, 2x Q3 and 2x Q4), one technical publication in popular magazine  63 publications in conference proceedings.  Author of 75 scientific reports of a total of 2870 pages, 1572 figures and 450 tables  Author of 4 patents  Director of 3 doctoral theses read  Training of 14 interns  Promotion and design of the installation of the optical fiber technology laboratory of the Composite Materials Area  Member of the management committee of 2 European projects, COST and EDA.  Chairmen at international conferences four times  Referee in SJR Journals on 11 occasions  Member of the qualifying court seven times  Evaluation of the research activity by the CNEAI: 2 six-year terms

Marc Porcar

Tue, 29 Mar 2022 23:09:57 +0200

Maria Asun Cantera

Fri, 19 May 2023 14:47:00 +0200

Master and Degree in Industrial Engineering, specializing in Mechanics (1994) from the University of Navarra, Campus Donostia-San Sebastián and PhD in Mechanical Engineering (2014) from the UPV/EHU. The doctoral thesis "Análisis del comportamiento mecánico de laminados cruzados biestables", received the prize for the best doctoral thesis awarded by the Fundación Iberoamericana de Ingeniería Mecánica in 2015.
After practicing her profession in various industries (Fundial, Uribesalgo, Linausa, etc) since 2004 she has been working in the Department of Mechanical Engineering in the Faculties of Engineering Gipuzkoa and Vitoria-Gasteiz. Associate Professor since 2014

She is a member of the UPV/EHU Research Group "Mechanics of Materials, MECMAT". Academic stays in foreign research centers in USA (Composite and Intelligent Materials Laboratory of the Mechanical Engineering Department), UK (Bristol Composites Institute, University of Bristol), France, ISABTP (Institut Supérieur Aquitaine du Bâtiment et des Travaux Publics).

LANGUAGES: C1: Spanish, Basque, English, B1: French.

Co-author of numerous indexed scientific articles and conference papers. Researcher ID B-5623-2015; Orcid Code http://orcid.org/0000-0001-6798-2510

Licenciada en Ingeniería Superior Industrial, especialidad Mecánica (1994) por la Universidad de Navarra, Campus Donostia-San Sebastián y doctora en Ingeniería Mecánica (2014) por la UPV/EHU. La tesis doctoral “Análisis del comportamiento mecánico de laminados cruzados biestables”, recibió el premio a la mejor tesis doctoral otorgada por la Fundación Iberoamericana de Ingeniería Mecánica en 2015.

Tras ejercer la profesión en diversas industrias (Fundial, Uribesalgo, Linausa, etc) desde 2004 ejerce como profesora en el Departamento de Ingeniería Mecánica en las Escuelas de Ingeniería Gipuzkoa y en la de Vitoria-Gasteiz. Profesora Agregada desde 2014.

Pertenece del Grupo de Investigación del UPV/EHU “Mecánica de Materiales, MECMAT”. Estancias en Centros de investigación extranjeros en USA(Composite and Intelligent Materials Laboratoy of the Mechanical Engineering Department), UK (Bristol Composites Institute, university of Bristol), Francia, ISABTP (Institut Supérieur Aquitain du Bâtiment et des Travaux Publics).
IDIOMAS: C1: Castellano, Euskera, Inglés, B1: Francés.
Coautora de numerosos artículos científicos indexados y de ponencias en congresos. Researcher ID B-5623-2015; Código Orcid http://orcid.org/0000-0001-6798-2510

María De La Torre

Tue, 19 Apr 2022 09:09:21 +0200

Maria del Carmen Serna Moreno

Tue, 12 Apr 2022 22:36:35 +0200

MC Serna Moreno

Marianella Hernandez Santana

Wed, 23 Feb 2022 13:22:10 +0100

Research lines based on the implementation of circular economy principles, favoring the use of recycled and self-healing materials.

Marta Cerdeira Peinado

Tue, 16 May 2023 08:04:25 +0200

Ingeniera de Innovación de producto en Talgo. Con formación académica en Ingeniería Industrial y Materiales, por la Universidad Politécnica de Madrid.

Marta Herrera

Thu, 18 May 2023 09:44:30 +0200

Materiales Compuestos

Thu, 10 Mar 2022 10:34:50 +0100

Materiales Compuestos es la revista editada por la Asociación Española de Materiales Compuestos (AEMAC). Ésta empieza su andadura en el año 2017, con la voluntad de ser un punto de encuentro entre investigadores, desarrolladores, técnicos, ingenieros, científicos y, en definitiva, toda la comunidad de profesionales que desarrolla su actividad en el mundo de los materiales compuestos.

El principal objetivo de la revista es la difusión y divulgación de los avances científicos y tecnológicos, en el campo de los materiales compuestos, que puedan ser de interés para AEMAC y para todos aquellos profesionales a los que se dirige la revista. En este sentido, serán de especial interés aquellos trabajos desarrollados en España, Portugal y América Latina, así como los trabajos de cualquier otra procedencia que puedan ser relevantes para su difusión en el foro de la revista.

Mattia Mazzeschi

Sat, 20 May 2023 23:52:58 +0200

Structural Health Monitoring, Non-destructive Testing, Thermoplastic composites.

Mohammad Sadegh Eshaghi Khanghah

Mon, 20 Jun 2022 11:53:28 +0200

Natalia Gutiérrez Pérez de Eulate

Fri, 29 Apr 2022 18:17:46 +0200

Dra. Natalia Gutiérrez Pérez de Eulate, doctora por la Universidad del País Vasco (UPV/EHU-2018) en Física de Nanonestructuras y Materiales Avanzados. Doctorado internacional realizado en el grupo “Polymers and Soft-Matter” del Centro de Física de Materiales (CFM, UPV/EHU) y en “Polymer and Soft-Matter Dynamics” (Université Libre de Bruxelles, ULB). Especializada en el campo de los materiales poliméricos habiendo realizado másteres en Química Aplicada y Materiales Poliméricos (UPV/EHU-2010) y en Diseño de Producto Plástico y Gestión (Leartiker-London Metropolitan University-2012). Profesionalmente ha desarrollado sus conocimientos en los departamentos de I+D del Centro de Investigación Joxe Mari Korta (Polymat), y en compañías dedicadas al sector eólico y a la automoción. Su trabajo en IDEKO desde 2018 está ligado al desarrollo e innovación de procesos de fabricación de materiales compuestos, englobando tecnologías de laminación, corte, impregnación y curado de resina. Ha participado en varios proyectos de investigación a nivel europeo y nacional y cuenta con varias publicaciones en congresos y revistas científicas de impacto.

Octavio Fenollar Gimeno

Fri, 29 Apr 2022 22:56:33 +0200

Dr. Octavio Angel Fenollar Gimeno develops his teaching activity in the Department of

Mechanical and Materials Engineering, in the area of Materials Science and Metallurgical

Engineering. He currently holds a position as University Professor since February 2019. His

research activity is developed at the Institute of Materials Technology of the Polytechnic

University of Valencia since April 2006.

Dr. Fenollar is the author of more than 45 articles published in journals listed in the JCR of

various topics, focused on the development of sustainable materials. The main lines of research

have been the surface modification of polymeric substrates through plasma technology, and

those focused on obtaining polymeric materials with less environmental impact. In this sense,

it is worth highlighting works aimed at the use of agro-industrial waste, the use of polymers

of natural and/or biodegradable origin, and composite materials with a marked ecological

component (resins and/or natural fibers), and biodegradable materials reinforced for 3D

printing.

Oihane Echeverria Altuna

Fri, 29 Apr 2022 13:34:57 +0200

Oihane Echeverria-Altuna. Degree in Chemical Engineering (UPV / EHU, 2017). Master in High specialization in Renewable Materials Engineering (UPV / EHU, 2018). Currently, she is a PhD student into the Composites departament of Tecnalia's Industry and Transport Division. The doctoral thesis is being carried out in collaboration with the research group GMT group (Materials + Technologies Group) from University of Basque Country. Her Doctoral Thesis, co-directed by Arantxa Eceiza and Isabel Harirmandy, is focused on development of new sustainable polyurethane resins for RTM (Resin Transfer Molding) for automotive structural applications.

Olalla Sanchez Sobrado

Thu, 18 May 2023 14:34:09 +0200

Paloma Luna

Fri, 29 Apr 2022 12:36:29 +0200

R&D Engineer at Element Materials Technology Seville

Paula Rodríguez Alonso

Mon, 14 Apr 2025 23:21:24 +0200

Estudié el grado de química en la Universidad de Vigo. Posteriormente, me incorporo al departamento de materiales avanzados del centro tecnológico AIMEN en el año 2018. Durante todos estos años he formado parte de proyectos de investigación en ambitos aeronauticos, automovilistico e ingeniería civil. Experta en tratamiento superficiales para su posterior unión directa y/o adhesiva . Manejo técnicas de fabricación de materiales compuestos tanto termoestables como termoplásticos; procesado en prensa, RTM , infusión ... .

Paula Vigón

Sun, 21 May 2023 01:49:03 +0200

Pedro Burgos Pintos

Sun, 27 Mar 2022 09:59:03 +0200

After finishing the degree in engineering in industrial design and product development, I began my professional career as a technician in the INNANOMAT group, where I have been professionally trained in additive manufacturing and industrial design technologies, including large format. At the same time I carried out a master's degree in Manufacturing Engineering.
I am currently a doctoral student with a predoctoral contract in this same research group.

Prasad Shimpi

Fri, 28 Feb 2025 11:08:34 +0100

Senior researcher in composites and material science at AIMEN technologies

Ramón Tejada Oliveros

Sat, 30 Apr 2022 20:08:44 +0200

RAUL CERDA GANDIA

Sat, 30 Apr 2022 11:08:37 +0200

Actualmente realizo una investigación como doctorante en la Universidad politécnica de Valencia campús Alcoy perteneciente al equipo de investigación: tecnología de materiales. (MAT)

La línea de investigación es: Desarrollo de biopolímeros funcionales mediante la incorporación de aceites esenciales a partir de distintos mecanismos de encapsulamiento en el programa: Programa de Doctorado en Ingeniería y Producción Industrial.

Richard Seddon

Thu, 18 May 2023 12:37:23 +0200

Senior Investigator in the Industry and Mobility Division at Tecnalia and is responsible for the development and industrial scaling of the buckypaper pilot line facilities.

Buckypaper continuous MWCNT sheet pilot line for the manufacture at industrial scale of continuous sheets consisting entirely of MWCNTs.
- Incorporation of materials with metallic foils, polymeric veils, elastomeric films and metallic oxides for applications in aeronautical structures, supercapacitor and battery electrodes, sensors, electrical heater elements and fire retarding layers for a wide range of industrial applications.
Work package leader in several FP7 and H2020 projects
- ELECTRICAL, PLATFORM and OASIS projects aimed at the development of composites and nanomaterials for applications in the aeronautical, transport, energy and construction sectors.
- SAbyNA Guidance Platform for the Development of Safer Nanomaterials and Nano-Enabled Products. Develop and customize a SAbyNA strategy and a set of associated resources, aimed at achieving safer nanoprocesses (NFs and NEPs) along their life cycle, including end-of-life processes as part of the SAbyNA Guidance Platform.

Rocío Calderon Villajos

Mon, 25 Apr 2022 11:24:11 +0200

Soy Doctora en Química por la Universidad Complutense de Madrid. He realizado mi tesisen el Instituto de Ciencias de Materiales de Madrid (ICMM). He realizado una estancia en el extranjero en el laboratorio de Física de la Materia Condensada de la Universidad Ecole Polytechnique, Palaiseau (Francia). He trabajado en CIEMAT en el departamento de Energía en la Unidad de Pilas de Combustible.

Actualmente me encuentro trabajando como Profesora Contratada de Doctors en el
departamento de Matemática Aplicada, Ciencia e Ingeniería de los Materiales y Tecnología Electrónica de la Universidad Rey Juan Carlos.

Soy especialista en la fabricación de nuevos materiales vía síntesis en fase húmeda de baja temperatura (síntesis hidrotermal, sol-gel, síntesis en capas delgadas mediante spray pirólisis). Manejo todas las técnicas de caracterización de materiales (microscopía: SEM, TEM, cristalografía de electrones, resolución de estructuras cristalinas por difracción de Rayos-X, análisis por IR, micro- y nanofabricación, análisis térmico diferencial, espectroscopía óptica, perfilometría). Especialista en la síntesis de nanocristales dopados con tierras raras para la obtención de propiedades espectrocópicas optimizadas.

También soy especialista en la fabricación de materiales poliméricos termoplásticos con impresión 3D, dispersión de nanorefuerzos en matrices poliméricas y en la extrusión de los mismos. Actualmente me encuentro optimizando la fabricación de probetas de Surlyn con y sin un nanorefuerzo de nanotubos de fibra de carbono vía impresión 3D y realizando una comparación de las propiedades mecánicas y evaluando la capacidad de auto-reparación que presenta el polímero estudiado.

Sara Dasilva

Fri, 16 May 2025 18:17:57 +0200

Senior Researcher Composites

Scipedia content

Tue, 24 May 2016 18:06:29 +0200

Scipedia is a scientific and technical digital publisher and professional social network. Scipedia aims to connect researchers and professionals in science and technology and facilitate them to share knowledge, expertise and the outcome of their work.

Sergio Horta Muñoz

Sat, 26 Mar 2022 10:39:12 +0100

Sergio Horta Muñoz is a professor and researcher in the field of Continuum Mechanics and Structural Theory. His teaching focuses on subjects such as Solid Mechanics and Strength of Materials within engineering degree programs. His research is centered on the mechanical characterization of composite materials and structures, with a particular interest in multiscale modeling, the study of damage and fracture mechanisms, and the development of advanced numerical methodologies, including extended finite element methods (XFEM) and microscale homogenization models.

Sergio Oller

Fri, 09 Jun 2017 22:41:56 +0200

Dr. Sergio Oller is Civil Engineer and is currently Full Professor of Structural Mechanics at the Technical University of Catalonia, Spain (BarcelonaTech-UPC: http://www.upc.edu/); Senior Researcher at the International Center for Numerical Methods in Engineering, Spain (CIMNE: www.cimne.com ); Honorary Professor at National University of Salta, Argentina.

He is Doctor in Civil Engineering by te Technical University of Catalonia, Spain; and Doctor “Honoris-Causa” by the University of Salta, Argentina; he has specialized on Advanced Structural Analysis at the Rome University, Italy; and Civil Engineering by the National University of Salta, Argentina.

He teaches the following courses at the UPC: “Strength of Materials and Structures”; “Fracture Mechanics”; “Composite Materials”; and “Structural Dynamics”.

He was Visiting Professor at the Civil Engineering Laboratory of the National University of Tucumán Argentina, Visiting Professor at the Faculty of Engineering of the University of Salta Argentina, and Visiting Professor at Department of Civil and Environmental Engineering of the State University of California at Berkeley USA.

His current research fields are: “Computational Mechanics”, “Constitutive Models”, “New Structural Materials”, “Composites Materials”, “Fatigue”, “Biomechanics”, and “Dynamic of Structures”. He supervised PhD and Master Theses, and published books and articles in these fields ( http://scholar.google.com/citations?user=dykQ-RkAAAAJ&hl=en ).

He participated in research projects in the framework of RTD programs of the European Commission, most of them as main researcher, in various projects funded by different Spanish Ministries, and in many consultancy contracts with Spanish and international companies or institutions.

Sonia García-Arrieta

Tue, 26 Apr 2022 10:01:09 +0200

PhD in Chemistry in the University of the Basque Country (2012), Master in Applied Chemistry and Polymeric Materials (2011) and Graduate in Chemical Sciences from the University of the Basque Country (1999). He works in the Plastics and Composites Group of Tecnalia (Div. Industry and Transport) since January 2000. Her experience focuses on the manufacturing technologies of both thermoplastic and thermoset materials and composite materials. She is expert in processes such as RTM, Infusion, Casting, autoclave molding and manual molding and especially has extensive knowledge in all processes related to liquid molding techniques either thermostable or thermoplastic. He has experience and Knowledge in the recycling processes of composite and plastic materials and sustainable processes. He has participated in different projects, both European and national, acquiring experience in knowledge of materials, technologies and applications of plastic materials and composites from sectors such as automotive, naval, space or wind, among others.

Soraya Pintos

Wed, 30 Mar 2022 21:58:21 +0200

Chemistry Degree from University of Vigo. Since 2017, she has been part of the Advanced Materials group, with experience in the development, manufacture and characterization of polymeric materials and composites. She has knowledge in the design of hybrid metal-polymer joints using press consolidation and UT welding techniques. As for the manufacture of materials, she highlights processing by mixing and extrusion, as well as thermoforming and press curing. She masters surface treatment through the use of chemicals, abrasives, and atmospheric plasma. Characterization of the surface energy by contact angle and measurement of the flow index in polymeric matrices.

Udane Olaziregi

Thu, 18 May 2023 11:27:04 +0200

PhD Student at mondragon Unibertsitatea. Researcher in Polymers and Composites Tecnologies department.

Ugutz Garitaonaindia

Fri, 29 Apr 2022 11:56:56 +0200

Industrial Technical Engineer, specialising in Mechanical Engineering, Industrial Organization Engineer and PhD from the University of the Basque Country. Currently Collaborating Professor of the Department of Mechanical Engineering in the Faculty of Engineering of Gipuzkoa. My teaching activity consists in the teaching of the subject Theory of Structures in the Degree of Civil Engineering and the subject Structures II in the Degree of Building Engineering.

As for the research, I belong to the research group Mechanics of Materials from the University of the Basque Country. The research activity is focused on the Finite elements Method and their application on the analysis of the composite materials.

Unai Morales

Sat, 30 Apr 2022 09:11:26 +0200

Mechanical Engineer graduated from UPV/EHU Engineering Technical School (University of Basque Country) in 2006. He has been working during ten years in TECNALIA RESEARCH AND INNOVATION (Basque Country R&D centre). Since 2017, he is a PhD student at the research group of Polymer and Composites Technology at Mondragon Unibertsitatea. His research is focused on Design and Optimization of 3D printed composite structures, developing lightweighting solutions and impact loading applications. He actually is involved in different fundamental research projects such as European projects or industrial transfer projects oriented to the automotive industry and mechanical engineering equipments.

Valentín Forte

Fri, 29 Apr 2022 13:42:36 +0200

Experienced professional with a demonstrated history of working in the aerospace tooling and machinery industry. Since January 2018 Innovation Area Manager at Mtorres´ Fuente Álamo Plant in Murcia, Spain. Skilled in Research and Development project & team management, team development, CATIA, Engineering, FEA, and Aerospace. Strong aeronautic engineering professional graduated from Universidad Politécnica de Madrid. MBA graduated (U.N.E.D. Spain)

Xavier Martinez

Mon, 09 Oct 2017 13:01:04 +0200

1994-2001: Studies of Civil Engineering (Bachelor and Master Degree) at the Technical University of Catalonia (UPC).

2001-2004: Project engineer at Pedelta S.L. Role as main project engineer in the design of bridges, footbridges and other special structures.

2004-2008: Doctoral studies in the Structural Analysis program of the Strength of Materials and Structural Engineering Department, of the UPC. These studies were conducted with a fellowship provided by the International Centre for Numerical Methods in Engineering (CIMNE).

2008: Dissertation of the PhD: “Micro-mechanical simulation of composite materials using the serial/parallel mixing theory” supervised by Dr. Sergio Oller.

2008-2009: Visiting scientist and Post-Doctoral Fellow at the Mechanical and Aerospace Engineering (MAE) department of the West Virginia University (WVU). The main task conducted in this period is the coordination of the “Resilient Tunnel Project” sponsored by Homeland Security (budget > $5,000,000)

2009-2014: Visiting professor at the Science and Nautical Engineering Department (DCEN) of the UPC. The teaching activity is conducted at the School of Nautical Studies (FNB) and at the School of Civil Engineering (ETSECCPB).

2012: Research stay at the MAE department of WVU

2013-17: Vice-dean Director of Studies at the FNB

2014: Contracted as Visiting lecturer at DCEN

2015: Board member of the Spanish Association of Composite Materials (AEMAC)

2017: Editor of the scientific journal Materiales Compuestos (Composite Materials) edited by AEMAC.

2018: Contracted as associate professor at DCEN

2019: Coordinator of the Master's program on Naval and Ocean Engineering

Currently working in three european projects related to composite materials: Fibre4Yards, Fibregy and Acasisas. In the former one acting as PI of the whole project.

Scientific production:

27 papers published in indexed journals (21 of them in Q1). 4 papers in non-indexed journals. 8 books and book chapters. More than 50 contributions to national and international conferences.

H-Index of 11, according to Scopus Database.

Research projects:

Participation in 1 research project in the United States, 9 European projects, 6 national (Spanish) projects, 1 project in collaboration between WVU and CIMNE and 6 projects for the industry.

Editor of 1 scientific journal and reviewer of 9 scientific journals. Co-Chair of two editions of the European Confernece on Multifunctional Structures (EMuS).